Instruction Manual

SETTING THE ICE WARNING ALARM ( )

If Weekday ( ) or Single day ( ) alarm is set, the Ice

Warning Alarm ( ) can be programmed.

• Press ALARM button once to enter into the Ice Warning

Alarm setting mode. The abbreviation with a

next to it will be displayed.

• Press and hold ALARM button for two seconds. The number

30 will flash, meaning that if selected, the alarm will sound 30

minutes earlier than the Weekday or Single alarm.

• Select the desired Ice Warning Alarm interval in 15 minutes

increments between 15 and 90 minutes, using UP (? ) or

DOWN (? )buttons

• Press ALARM button to confirm and exit from the alarm

setting mode.

ACTIVATING/ DEACTIVATING ALARMS

• Press ALARM button to enter into the desired alarm mode.

• Press UP ( ? ) to activate alarm and the corresponding icons

, or will be displayed.

• Press DOWN ( ? ) to deactivate alarm until “ ” is

displayed.

MAINTANANCE

CHANGING BATTERIES

• If the low battery indicator lights up, replace batteries in the

corresponding unit.

• Do not mix old and batteries.

CLEANING

The main unit and remote sensors housings can be cleaned with

a damp cloth. Small parts can be cleaned with a cotton tip or

pipe-cleaner. Never use abrasive or corrosive cleaning agents or

solvents. Do not immerse electronic components in water.