Instruction Manual LXD™ 75 -Series Telescopes
CONTENTS WARNING! Never use a Meade® LXD75™-Series Telescope to look at the Sun! Looking at or near the Sun will cause instant and irreversible damage to your eye. Eye damage is often painless, so there is no warning to the observer that damage has occurred until it is too late. Do not point the telescope or its viewfinder at or near the Sun. Do not look through the telescope or its viewfinder as it is moving. Children should always have adult supervision while observing.
TELESCOPE FEATURES J Ig f ed B 1$ 1# H C 1) 1! 1@ Fig. 1a: The LXD75-Series Telescope Optical Assembly (Schmidt-Newtonian model with Autostar handbox shown; Electronic Controller model users, see Appendix D, page 58). d B C1^ g f e 3& 3^ I 1% H Fig. 1b: Close up of Focuser and Viewfinder Assembly, Schmidt-Newtonian shown. (See Fig. 1a for overview.) For a close up of the refractor focuser assembly, see Fig. 10b, page 13. 4 3( 3* 3% Fig. 1c: The LXD75-Series Tripod.
1& 3$ 3@ 3! 3) 2( 2* 2^ 1* 1( T 2$ 2! 2@ 2# 3# 2& 2% 2^ Fig. 1d: The LXD75-Series Mount; insert shows opposite side of Mount. C D B A F E Fig. 1e: The LXD75-Series Computer Control Panel (see 2$ above). Legend 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. Eyepiece Thumbscrew Eyepiece Holder Eyepiece Viewfinder (VF) VF Collimation Screws VF Front Cell VF Bracket Focus Knobs Corrector/Dust Cover Optical Tube 11. 12. 13. 14. 15. 16. 17. 18. 19. 20.
LXD75-Series:Your Personal Window to the Universe The Meade LXD75-Series models are versatile, high-resolution telescopes. Supplied with either an Electronic Controller or an Autostar handbox, the LXD75-Series models offer unmatched mechanical and electronic performance. Caution: Using products other than standard Meade accessories may cause damage to the telescope’s internal electronics and may void the Meade warranty. The LXD75-Series telescopes reveal nature in an ever-expanding level of detail.
Caution When loosening the Dec. lock, be sure to support the optical tube (18, Fig. 1a). The weight of the tube could cause the tube to swing suddenly. 1% Viewfinder Bracket Screws: Tighten to a firm feel to hold viewfinder securely in place (see E and h). See page 12 for more information. 1^ Focus Lock Knob: Designed to prevent the focuser drawtube from moving when a heavy accessory, such as a camera, is attached to the focuser assembly.
2( sure to turn off the LED when finished with the polar viewfinder. Powered by (factory-supplied) batteries contained within. Want to learn more about the polar alignment viewfinder? 3! 3@ See the The Polar Alignment Viewfinder, page 52. 3# R.A. Lock: Controls the manual movement of the telescope. Turning the R.A. lock counterclockwise unlocks the telescope enabling it to be freely rotated by hand about the R.A. axis. Turning the R.A.
AUTOSTAR FEATURES L Important Note: The model SN-6EC, model SN-8EC, and model AR5EC are equipped with an Electronic Controller handbox, rather than the Autostar Handbox. Several of the following procedures, such as Tracking Objects and Initializing Autostar (to name but a few), are relevant only to models equipped with the Autostar handbox and do not apply to the EC models. For more information about the EC handbox, see APPENDIX D: EC HANDBOX, page 58. 1 D B E C H F G K I J Fig.
Tip: If the "ENTER to Sync" feature is accessed by mistake, press MODE to return to the previous screen. Note: If ENTER is pressed for two seconds or more and then released, Autostar emits a beep and “ENTER to Sync” is displayed. "ENTER to Sync" may be used only after your telescope has been aligned and is pointing at an object. See page 30 for more details. 3 MODE Key: Press to return to the previous menu level. The top menu level is “Select Item.
GETTING STARTED As you unpack your telescope, carefully note the following parts. The assembly is shipped in separate boxes. Second slot Bushing Fig. 5a: Slide bushing over shaft.
knob to a firm feel. Replace the safety cap. Secondary Lock Knob Cradle Lock Knob Note: If the counterweight ever slips, the safety cap (23, Fig. 1d) prevents the counterweight from sliding entirely off the shaft. Always leave the safety cap in place when the counterweight is on the shaft. 6. Set the latitude: Setting the latitude is easier if it is set before you attach the optical tube to the assembly. Locate the latitude dial (28, Fig.
finished observing to protect the eyepiece assembly. Back off the eyepiece thumbscrews (1, Fig. 1b) and slide the diagonal into the holder and tighten the thumbscrews to a firm feel only. Insert the supplied SP 26mm eyepiece (3, Fig. 1b) into the the diagonal. Tighten the diagonal's thumbscrews to a firm feel to secure the eyepiece. Thumbscrew Note: Two eyepiece holders are included with your telescope—for both 1.25" and 2" eyepieces.
3. Collimation Screws Viewfinder Eyepiece Viewfinder Bracket Achromatic refractor, Schmidt-Newtonian models and Newtonian models: Again, hold the optical tube so that it cannot accidentally swing freely. Lock the R.A. lock (33, Fig. 1d), and unlock the Dec. lock (17, Fig. 1d). The telescope now is able to move freely about the Dec. axis. Loosen the cradle ring lock knobs (13, Fig. 1a) so that the main tube slides easily back and forth in the cradle rings.
Note: Seeing conditions vary widely from night-tonight and site-to-site. Turbulence in the air, even on an apparently clear night, can distort images. If an image appears fuzzy and ill-defined, back off to a lower power eyepiece for a more well-resolved image (see Fig. 15a and 15b below). Note: For a list of magnification ratings of the eyepieces available for the LXD75-Series telescopes, see OPTIONAL ACCESSORIES, page 37.
supplied with your telescope. When the object is centered and focused in the eyepiece, switch to a higher power eyepiece to enlarge the image as much as practical for prevailing viewing conditions. For information about other eyepieces available for your telescope, see OPTIONAL ACCESSORIES, page 37. ■ Once centered, an object can be focused by turning one of the knobs of the focusing mechanism (8, Fig. 1b).
Note: If you wish to perform a more precise polar alignment for the purposes of astrophotography, see "Appendix B," page 52. Speeds 1, 2, or 3: Best used for fine centering of an object in the field of view of a higher power eyepiece, such as a 12mm or a 9mm eyepiece. Speeds 4, 5, or 6: Enables centering an object in the field of a low-to-moderate power eyepiece, such as the standard Super Plössl 26mm. Speeds 7 or 8: Best used for rough centering of an object in the viewfinder.
Observe a Star using the Automatic Tracking Feature Tip: You can change the telescope's slew rate while centering an object in the eyepiece. See SLEW SPEEDS, page 16 for more information. In this example, Autostar's Arrow keys are used to find a star, and then Autostar's tracking capability automatically keeps the star centered in your telescope's eyepiece. EC handbox users, see APPENDIX D, page 58, for information about tracking with the EC handbox. 1.
Moving Through Autostar’s Menus (Autostar Models Only) Autostar's menus are organized for quick and easy navigation. Tip: When multiple choices are available within a menu option, the current option is usually displayed first and highlighted by a right pointing arrow (>). ■ ■ ■ ■ ■ Press ENTER (2, Fig. 2) to go deeper into Autostar menu levels. Press MODE (3, Fig. 2) to move back toward the top menu level. Press the Scroll keys (7, Fig.
a. 9. Autostar prompts you to enter the Country or State (listed alphabetically) of the observing site. Use the Scroll keys to cycle through the database of countries, states, and provinces. Press ENTER when the correct location displays. b. Autostar then prompts you to enter the nearest city (listed alphabetically) to the observing site. Use the Scroll keys to cycle through the database of cities. Press ENTER when the correct city appears on screen.
15. "Drive Setup: For this...." begins to scroll across the display. This is another reminder to point your telescope at a terrestrial object. Loosen the R.A. and Dec. locks (17 and 33, Fig. 1d) and point the telescope at an object. Then re-tighten the locks. Press ENTER when the telescope is pointing at the desired terrestrial object. 16. "Center reference object" displays. Center your target object using the Arrow keys. When centered, press ENTER. 17.
5. Press GO TO. “Saturn: Slewing...” displays and the telescope slews until it finds Saturn. You may need to use the Arrow keys to center Saturn precisely in the eyepiece. Autostar then automatically slews (moves) the telescope so that it tracks Saturn (or whatever other object you may have chosen). Saturn remains centered in the eyepiece. Using the Guided Tour (Autostar Models Only) Fig. 17: The planet Saturn is over 800 million miles from the Earth.
BASIC AUTOSTAR OPERATION SETUP MENU Easy alignment permits all telescope operations with only a quick setup. Important Note: Some models are equipped with an Electronic Controller handbox, rather than the Autostar Handbox. The following sections (BASIC Select Item: Setup AUTOSTAR OPERATION, AUTOSTAR MENUS, AND USEFUL AUTOSTAR PROCEDURES), are rele- UTILITIES MENU Calculate eyepiece magnifications; set timer alerts; create your own landmark survey.
3. Press the ENTER key to choose the "Event" option and move down a level. "Event: Sunrise" is displayed. 4. Press the Scroll Down key once to display the "Sunset" option in the Event menu. 5. Press the ENTER key to choose the "Sunset" option and move down another level. 6. Autostar calculates the Sunset time based on the current date, time, and location. Autostar then displays the results of the calculation. 7. Press MODE once to start moving back up through the Autostar levels.
Sunrise Sunset Moonrise Moonset Moon Phases Next Full Moon Next New Moon Next 1st Qtr Next 3rd Qtr Meteor Showers Quadrantids Lyrids Eta Aquarids Delta Aquarids Perseids Orionids Taurids Leonids Geminids Ursids Solar Eclipses Lunar Eclipses Min. of Algol Autumn Equinox Vernal Equinox Winter Solstice Summer Solstice Select Item: Event Fig. 21 The Complete Autostar Menu Structure. Solar System Mercury Etc. Moon Asteroids Comets Constellations Andromeda Etc.
MENUS Object Menu Almost all observing with Autostar is performed using the Object menu category. (Note: Exceptions include Guided Tour and Landmark Survey.) See GO TO SATURN, page 21, for an example of observing using the Object menu. Also see USING THE GUIDED TOUR, page 22. Autostar contains many libraries of viewable objects, such as stars, planets, comets, nebulae and so forth.
Browse allows you to search the library for objects with certain parameters, much like a search engine. "Edit Parameters" lets you set various parameters for the search, such as: Object Type, Minimum Elevation, Largest, etc. Once you have set the parameters of the search, select "Start Search" and press ENTER. Autostar will display the results of the search. Event Menu The Event menu provides access to dates and times of astronomical events.
■ Set: Enter the time to be counted down, in hours, minutes, and seconds, then press ENTER. ■ Start/Stop: Activates the timer set previously. Use the Scroll keys to toggle between ON and OFF. When ON is displayed, press ENTER to activate the timer. When the timer runs out, four beeps sound and the timer is deactivated. Alarm selects a time for an alarm signal as a reminder. To use the Alarm, press ENTER, then choose "Set" or "Start/Stop.
Want to learn more about using the Date menu? See the LXD75 TIPS box, page 24. Date changes the date used by Autostar. This function is useful to check events in the past or future. For example, set the Date menu for a day three months in the future. Then check the "Select Item: Event" menu for the Sunset time on that date. See EVENT MENU, page 27. Time changes the time entered into Autostar. Setting the correct time is critical for Autostar to properly calculate locations and events.
a. ■ Tip: The Reverse L/R and U/D functions are useful if you are observing in the Southern hemisphere. ■ Reverse U/D: Reverses the functions of the Up and Down Arrow keys (i.e., the Up key moves the telescope down). ■ Quiet Slew: Sets the maximum slew rate to 1.5° for quieter operation. ■ Max Elevation: Allows you to enter a value in degrees that sets a limit as to how far the optical tube can swing upward during a programmed slew.
■ Note: The Download and Clone functions require the optional #505 Astrofinder Software and Cable Connector Kit. See the instruction sheet included with the kit for more information on how to download. Address: Use the Up and Down Arrow keys to enter your street address, city, state, and zip code. Press ENTER when the entry is complete. Download transfers information from another Autostar. During the operation, the warning “Downloading Do Not Turn Off” appears.
USEFUL AUTOSTAR PROCEDURES Before trying out the examples in this section, familiarize yourself with the basic operations of Autostar described earlier in this manual. The following examples assume that you have a basic knowledge of Autostar and understand how to scroll to a desired menu or menu option, and how to enter numbers and text. It also assumes that you have initialized and aligned your telescope.
11. Press MODE. "Site: Edit" displays. 12. Using the Arrow keys, scroll to "Site: Select." The site you have just edited displays. Press ENTER to select the site or press MODE to exit. Using Autostar to Find Objects Not in the Libraries In this procedure, you will enter coordinates of celestial objects that do not appear in any of the Autostar libraries. You will enter the object's name and R.A. and Dec. coordinates (required information).
Observing Satellites In this procedure, you will prepare your telescope to observe a satellite pass. 1. Navigate to the "Object: Satellite" menu option and press ENTER. 2. Use the Scroll keys to scroll through the list of satellites. 3. Select a satellite from the list and press ENTER. 4. "Calculating...." and then "Tracking..." displays. If the satellite is going to make a pass, "Located" displays. 5.
Another setup method is to select an object from the Landmark database. See TO SELECT A LANDMARK FROM THE DATABASE below. Then manually move the telescope's optical tube and center this object in the telescope eyepiece. 2. Display the "Setup: Targets" menu option. Choose "Terrestrial" and press ENTER. "Setup: Targets" displays again. Choosing this option turns off tracking for astronomical objects which is not useful for the viewing of terrestrial objects such as those in the Landmark database.
PHOTOGRAPHY d C B Fig. 22a: LXD75-Series T-Adapter attached to focuser assembly and camera. (1) Camera Body, (2) T-Adapter, (3) Focus Knob. Focuser Extension Tube Fig. 22b: Focuser Extension Drawtube with eyepiece holder and eyepiece attached. Photography through an LXD75 Schmidt-Newtonian and Newtonian Reflector telescope requires an LXD75-Series T-Adapter (supplied) attached to the telescope (Fig. 22a). Through-the-telescope photography is possible with any 35mm camera body with a removable lens.
OPTIONAL ACCESSORIES A wide assortment of professional Meade accessories is available for the LXD75-Series telescope models. The premium quality of these accessories is well-suited to the quality of the instrument itself. Consult the Meade General Catalog for complete details on these and other accessories. Eyepiece/Apparent Field 6” f/5 Power/Actual Field 8” f/4 Power/Actual Field 10” f/4 Power/Actual Field Super Plössl Eyepieces (4-elements; 1.25” O.D.) 6.4mm/52° 9.7mm/52° 12.
Series 4000 8 - 24mm Zoom Eyepiece: The internal zoom optics of this eyepiece move on smooth, precisely machined surfaces which maintain optical collimation at all zoom settings. A scale graduated in 1mm units indicates the zoom focal length in operation. An excellent addition to any eyepiece set. #140 2x Barlow Lens: A 3-element design, doubles each eyepiece power while maintaining uncompromised image resolution, color correction, and contrast.
#1205 Electric focuser: For use with LXD75 Schmidt-Cassegrain SC-8 model. Meade electric focusers are uniquely designed to yield smooth, precise microfocusing of the image, without disabling the manual focus knob, which may be used for rapid coarse focusing. Includes push-button hand controller with self-contained (user provided) battery. #1209 Microfocuser: For use with LXD75 Schmidt-Cassegrain SC-8 model. Supplied with a handbox, the microfocuser threads directly to the rear cell of model SC-8.
MAINTENANCE General Maintenance LXD75-Series telescopes are precision optical instruments designed to yield a lifetime of rewarding applications. Given the care and respect due any precision instrument, your LXD75 will rarely, if ever, require factory servicing. Maintenance guidelines include: a. Avoid cleaning the telescope’s optics: A little dust on the front surface of the telescope’s correcting lens causes virtually no degradation of image quality and should not be considered reason to clean the lens.
b c d Tip: A useful tool for making collimation easier is to make a hole in the plastic cap that comes with the eyepiece to protect it during shipping. Use a drill to make a 1/8" hole in the center of the cap and place it over the eyepiece holder for use during the collimation procedure. e Focuser drawtube Diagonal mirror Reflection of primary mirror Reflection of secondary mirror (darkened due to back lighting) f g b c d e f Primary mirror clips Reflection of observer's eye g Fig.
b c Fig. 32: Correct (1) and incorrect (2) collimation as viewed during a star test. Note: A small paper ring is attached to the primary mirror. This ring was attached at the factory for purposes of laser collimation. The ring will not diminish your telescope's imaging capabilities and does not need to be removed. 4. Perform an actual star test to confirm the accuracy of steps 1 through 3.
1 2 3 Fig. 33a: Defocused star images. Misaligned (1, 2), Aligned Fig. 33b: Collimation screws. Caution: Do not force the three collimation screws past their normal travel and do not loosen them more than two full turns in a counterclockwise direction or the secondary mirror may come loose from its support. You will find that the adjustments are very sensitive, usually requiring only one-half turn or less to produce the desired result. b.
Alignment (Collimation) of the Newtonian Reflector Optical System The optical systems of Newtonian Reflector telescopes include the following parts: primary mirror (1, Fig. 34); secondary mirror (2, Fig. 34); secondary mirror-holder (3, Fig. 34); secondary mirror-vanes (4, Fig. 34) and (1, Fig. 35); primary mirror-tilt screws (5, Fig. 34). The telescope’s image is brought to a focus at (6, Fig. 34). 1. Confirm alignment - To confirm optical alignment look down the focuser drawtube (1, Fig.
4 3 1 2 5 6 Fig. 34 3 2 2 1 2 3 Fig. 36. Fig. 35. 1 2 2 3 4 1 5 Fig. 37. Fig. 38. 1 1 2 2 Fig. 39. 4 3 3 Fig. 40.
SPECIFICATIONS 6" f/5 Model SN-6AT, SN-6EC Specifications Optical design ..............................................Schmidt-Newtonian Clear aperture..............................................6" (152mm) Focal length ................................................762mm Focal ratio (photographic speed) ................f/5 Resolving power ..........................................0.74 arc secs Coatings ......................................................
10" f/4 Model SN-10AT Specifications Optical design ..............................................Schmidt-Newtonian Clear aperture..............................................10" (254mm) Focal length ................................................1016mm Focal ratio (photographic speed) ................f/4 Resolving power ..........................................0.45 arc secs Coatings ......................................................
Alignment ....................................................German-type equatorial mount Slew Speeds................................................1x sidereal to 4.5°/sec in 9 increments Tripod ..........................................................Variable-height field tripod Accessories ................................................8 x 50mm finder 1.25" diagonal Super Plössl 26mm eyepiece 1.
Autostar Specifications Processor ............................................................................68HC11, 8MHz Flash Memory ............................................................1.0MB, reloadable Keypad ........................................................................20 key alphanumeric Display ........................................................................2 line, 16 character LCD Backlight......................................................................
APPENDIX A: CELESTIAL COORDINATES A celestial coordinate system was created that maps an imaginary sphere surrounding the Earth upon which all stars appear to be placed. This mapping system is similar to the system of latitude and longitude on Earth surface maps. In mapping the surface of the Earth, lines of longitude are drawn between the North and South Poles and lines of latitude are drawn in an East-West direction, parallel to the Earth’s equator.
star, and also of the object you wish to locate, in a star atlas. Point the object at the bright star. Then loosen the R.A. setting circle lock knob (32, Fig. 1d) and turn the R.A. setting circle to read the correct R.A. coordinate of the bright star; lock the R.A. setting circle lock knob onto the object. Next, loosen the R.A. lock (33, Fig. 1d) and turn the telescope in R.A. to read the correct R.A. coordinate of the object. Tighten the R.A. lock (33, Fig. 1d).
APPENDIX B: ENHANCING POINTING PRECISION Reticle LED Knob The Polar Alignment Viewfinder Typically Autostar's pointing capabilities are sufficient for most telescope observers, and the use of the polar alignment viewfinder is unnecessary for them. However, for those observers who need to meet the more demanding requirements of astrophotography, the polar alignment viewfinder allows the telescope mount to be more precisely aligned with true North.
4. Autostar then chooses three stars from its database to align upon. When the telescope slews to a star for alignment, it may not appear in the field of view in the eyepiece. Use the Arrow keys to move the telescope until the star is visible and centered in the eyepiece. The alignment star should be easily recognized and be the brightest star in the area of the sky where the telescope is pointing. See WHICH ONE'S THE ALIGNMENT STAR, page 18, for more information. When the star is centered, press ENTER.
Important Note: The image will appear right-side-up, but reversed left-forright, in the eyepiece of a refractor telescope. The image will appear upside-down, but correct left-for-right, in the eyepiece of a SchmidtNewtonian telescope, if the eyepiece extends horizontally from the tube, as described in Step #3. Fig. 45: Position A. 5. Loosen the R.A. Lock (Tip: Make sure you do not accidentally loosen the Dec. Lock. If you do, restart the procedure beginning at Step #2).
A 7. Rotate the telescope 180° in the R.A. axis ONLY, to return the optical tube to position A. C 8. Repeat steps 5 through 8, if necessary, alternating between position A and position B, and bringing the reference object halfway of the remaining distance to center. Stop the procedure once the distance between the object in position A and position B is less than one third the width of the eyepiece. Motor at back of mount 9.
The telescope first moves 180° on the Dec. axis and then rotates 180° on the R.A. axis. Autostar displays "Slewing....". When the telescope has completed the 180° slew, the telescope will be under the mount instead of over it. The counterweight shaft is now pointed upwards and the cradle adjustment screws (Fig. 47) are easily accessible. 7. Autostar again prompts you to center the landmark you have chosen in the eyepiece. Use the Arrow keys to center the object and then press ENTER. 8.
APPENDIX C: LATITUDE CHART Latitude Chart for Major Cities of the World To aid in the polar alignment procedure (see pages 17-21), latitudes of major cities around the world are listed below. To determine the latitude of an observing site not listed on the chart, locate the city closest to your site. Then follow the procedure below: Northern hemisphere observers (N): If the site is over 70 miles (110 km) north of the listed city, add one degree for every 70 miles.
APPENDIX D: EC HANDBOX 1 Important Note: The Electronic Controllers available for Meade's ETX and DS telescope series are not compatible and will not operate with the LXD75 EC series models. Do not plug in other telescope series' EC handboxes into the LXD75 computer control panel, nor plug the LXD75 EC series handboxes into any other telescope series computer control panel. Fast 2 Medium Moderate 7 6 Slow 3 5 4 Fig. 49: Electronic Controller.
5 MODE Key: Press and hold MODE to place the Electronic Controller into the Mode function, i.e., to select operation for the Northern or Southern Hemisphere. See TRACKING RATES, page 60. 6 OUT Key: Use this key to decrease the tracking rate. See TRACKING RATES, page 60. 7 IN Key: Use this key to increase the tracking rate. See TRACKING RATES, page 60. Modes of Operation • When both the A and B screws are in place, the Northern hemisphere polar mode is selected when power is applied (i.e.
7. When the test is complete, light 1 remains on; lights 2, 3, and 4 turn off. 8. Use the four Arrow keys (1, Fig. 49) to slew the telescope to the desired object. To change the slew speed, press SPEED. 9. Fine-adjust the position of the object with the Electronic Controller Arrow keys so that it is centered in the viewfinder. The object is now ready to be viewed through the telescope’s eyepiece.
Note: The tracking rate can be increased by up to 65%. 4. To use a rate slower than sidereal, press OUT (6, Fig. 49) until light 4 blinks again (sidereal rate). Press OUT key and light 4 goes out, signifying a tracking rate 0.5% slower than sidereal. Note that when the Mode function is active, the tracking motor stops. To restart the tracking motor, press MODE again. Experiment with this function to get the right speed: Press OUT to set the tracking rate. Then press MODE and look through the eyepiece.
Screws at the back-end of the bracket APPENDIX E: MOUNTING THE MODEL SC-8 SCHMIDTCASSEGRAIN OPTICAL TUBE Slot Groove Locking Knobs Fig. 54 Mounting the SC bracket and optical tube to the mount. How to Attach the Optical Tube to the Mount The LXD75 model SC-8 Schmidt-Cassegrain assembles and operates identically to all the other LXD75 models equipped with an Autostar handbox, with one exception: the optical tube is attached to the mount with a mounting bracket rather than the cradle ring assembly.
APPENDIX F: BASIC ASTRONOMY In the early 17th century Italian Scientist Galileo, using a telescope smaller than your LXD75, turned it skyward instead of looking at the distant trees and mountains. What he saw, and what he realized about what he saw, has forever changed the way mankind thinks about the universe.
Planets Planets change positions in the sky as they orbit around the Sun. To locate the planets on a given day or month, consult a monthly astronomy magazine, such as Sky and Telescope or Astronomy. You can also consult Autostar for information about planets. Scroll to the "Object: Solar System" menu and scroll through the lists of planets. When a planet you are interested in displays, press ENTER.
LXD75 TIPS Further Study.... This manual gives only the briefest introduction to astronomy. If you are interested in pursuing further studies in astronomy, a few topics are suggested below that are worth reading up on. Try looking up some of these in the optional Autostar glossary. Also included below is a small sampling of books, magazines, and organizations that you might find helpful. Topics 1. How is a star born? How does a solar system form? 2.
MEADE LIMITED WARRANTY Every Meade telescope, spotting scope, and telescope accessory is warranted by Meade Instruments Corporation (“Meade”) to be free of defects in materials and workmanship for a period of ONE YEAR from the date of original purchase in the U.S.A. and Canada. Meade will repair or replace a product, or part thereof, found by Meade to be defective, provided the defective part is returned to Meade, freight-prepaid, with proof of purchase.
