Manual

If you have a question concerning your LS-6
telescope, call the Meade Instruments Customer
Service Department at [phone]. Customer
Service hours are 7:00 AM to 5:00 PM, Pacic Time,
Monday through Friday. In the unlikely event that
the LS-6 requires factory servicing or repairs, before
returning the telescope to the factory, write or call
the Meade Customer Service Department to provide
an explanation of the problem, as well as your
name, address and daytime telephone number. The
great majority of servicing issues can be resolved
by telephone, avoiding return of the telescope to
the factory.
CUSTOMER
SERVICE
LS-6 Mini SD Card for Updates and
Image Storage
Your LS-6 telescope comes with a “Mini SD Card” slot
located in the front edge of the fork arm. With a user
supplied “Mini SD Card”, or a “Micro SD Card” in a Mini
Card Adapter, you can update your telescope rmware
or save images made with the ECLIPS CCD.
Only use SD Cards bearing the ofcial SD logo. Each
card must be properly formatted, using a PC utility or
AutoStar Suite, before use in the LS-6. The card must
be formatted with the FAT32 File System.
Your LS-6 will not power-up with an SD Card inserted
in its slot unless you are updating the rmware from the
card. This includes an SD Card used to store images
from the ECLIPS camera. To ensure the application
software boots normally, remove the SD Card before
switching on the LS-6 LightSwitch. If you observe that
the LS-6 is taking a long time to power-up, please
ensure the Mini SD Card slot is empty and cycle the
LS-6 LightSwitch off and on.
CUSTOMER SERVICE
36