Instruction manual

12
EMPTYING THE WATER
Continuous Drainage
When the water container is full:
An alarm signal will sound
The Empty Tank LED will flash
The dehumidifier will stop automatically.
Empty the water container and replace it in the correct position.
The dehumidifier will start to work again.
If the “Empty tank” light stays on and the unit does not start up then the tank is not correctly fitted.
It is possible to connect the drainage hose (included in the box) to the dehumidifier for permanent water
drainage. Simply connect the hose to the drain spout and ensure that the end of the hose is lower than the
drain opening, otherwise the water will not drain and flooding may occur.
Water spigot
When you no longer wish to use the permanent water drainage, disconnect the drainage tube from the
device. Ensure that the water container is positioned correctly.