User manual

First time setup

When you turn on the thermostat, it issues a double beep

if it is configured to create a own network (default) or a

single beep if it is configured to access to the home net-

work. After a few seconds you will hear another beep to

indicate that the thermostat is ready to operate. If turning

on you hear a double beep, you can proceed with the con-

figuration of the parameters to make sure that the thermo-

stat connects to your network. Otherwise, to allow the de-

vice to create its own network, press for a second the but-

ton through the hole.

The hole is located below the ventilation grid in the lower

left part of the unit.