User manual

• The "Advanced" button allows you to set special param-

eters of the thermostat: the field delta (thermic differen-

tial) allows you to set in tenth of degrees (from 0 to 9)

the range of activation / deactivation. Example: if we set

value to 0 and the set temperature is 20°C, winter mode

shutdown will occur at 20.1 ° C and the activation at

19.9 ° C. If we set the field to 2, the shutdown will be at

20.3°C and the activation at 19.7°C. Sensitivity (High,

Medium, Low) allows you to set the number of readings

that the thermostat uses to calculate the temperature.

The thermostat does a temperature reading approxi-

mately every 10 seconds, and displays the value based

on the average temperature.

High sensitivity: average of 4 readings.

Medium sensitivity: average of 8 readings.

Low sensitivity: average of 16 readings.

The field “Correction” allows you to modify the value

of the temperature detected by the thermostat, in case is

not equal to the actual temperature for particular envi-

ronmental conditions, or to calibrate in a more precise

way the reading having available a tool to detect the

temperature. This field allows to specify a value in de-

grees (from -9.0 ° C to +9.0 ° C) that will be added or

subtracted, according to the sign, to the value of the

temperature.