User manual

figure the thermostat to allow it connecting to your wifi
network. Fill in the appropriate fields and press “Send".
At this point, the thermostat will beep and will try to con-
nect to your network. Exit the application and reconnect
to your network and relaunch the program.
If you have not used the DHCP you will be already able
to view settings. If you are using DHCP, go to the "Net-
work" tab and press the button “Find Device".
The app will search to find the IP address assigned and
will take memory of it for next access. At this point you
are ready to use iThermo4all in all its functions.
Info
This tab allows to check the various operating parameters
of the thermostat and in particular:
Iphone and Windows
Current temperature
Temperature set
Operation Mode
Day and Time
Function (Summer / Winter)
Next time of temperature change or holiday days
Name of thermostat
11