User manual

Once you are ready, follow the instructions depending on

the type of software used.

iPhone

Download the software from the iTunes Store.

Connect to the network "iThermo4all" and launch the

app. You will now see the settings of your thermostat. En-

able the "Network" tab and select the label at the top

“Network": the display shows all the fields to configure

the thermostat, so that it can connect to your wifi net-

work. Fill in the appropriate fields and press "Send" At

this point, the thermostat will beep and will try to connect

to your network. Exit the application and delete it from

the application switcher; reconnect to your network and

relaunch the app. If you have not used the DHCP you will

be already able to view settings. If you are using DHCP,

go to the "Network" tab and press the button “Find De-

vice". The app will search to find the IP address assigned

and will take memory of it for next access. At this point

you are ready to use iThermo4all in all its functions.

Windows

Download the software at

http://www.ithermo4all.eu/download/ and execute the

setup. Connect to the network "iThermo4all" and launch

the application, the display shows all the settings on your

thermostat. Enable the "Network" tab and select the radio

button “Network”, than you will see all the fields to con-