Specifications

MDS 05-6628A01, Rev. A MDS Orbit MCR-4G Technical Manual 61
Iperf Service
Understanding
Iperf service allows one to receive TCP traffic from remote host running iperf. Currently, iperf service is
hardcoded to act only as a TCP server listening on port 5001.
Configuring
The following shows how to enable iperf service:
admin@(none) 22:04:32% set services iperf enabled true
admin@(none) 22:04:32% commit
NOTE: If firewall is enabled, then it must be configured to permit incoming TCP traffic on port 5001.
Monitoring
Ensure the CLI is in operational mode. Follow the example to view the state of iperf service:
admin@(none) 22:07:37> show services
NAME STATUS
--------------------------
DHCP Server running
Firewall running
IPerf Server running
Terminal Server running
VPN running