Specifications

MDS 05-6628A01, Rev. A MDS Orbit MCR-4G Technical Manual 39
Monitoring
Ensure the CLI is in operational mode. Follow the example below to view the state and statistics of a bridge.
In this example, bridge br0 is bridging LAN (eth0) and WiFi (wlan0) networks.
interfaces interface br0
if-index 4
status mac-address 00:19:70:94:7e:2d
status mtu 1500
status link up
status ipv4 address [ 10.10.1.1/24 ]
status ipv6 address [ fe80::c4ff:bdff:feaf:b9f6/64 ]
status counters collisions 0
status counters multicast 0
status counters rx_bytes 7094971
status counters rx_compressed 0
status counters rx_crc_errors 0
status counters rx_dropped 0
status counters rx_errors 0
status counters rx_fifo_errors 0
status counters rx_frame_errors 0
status counters rx_length_errors 0
status counters rx_missed_errors 0
status counters rx_packets 151306
status counters rx_over_errors 0
status counters tx_aborted_errors 0
status counters tx_bytes 275063
status counters tx_carrier_errors 0
status counters tx_compressed 0
status counters tx_dropped 0
status counters tx_errors 0
status counters tx_fifo_errors 0
status counters tx_heartbeat_errors 0
status counters tx_packets 3199
status counters tx_window_errors 0
bridgeStatus stp port eth0
number 1
priority 0
state forwarding
path-cost 19
designated-root 8000.001970947e2d
designated-cost 0
designated-bridge 8000.001970947e2d
designated-port 32769
bridgeStatus stp port wlan0
number 2
priority 0
state forwarding
path-cost 100
designated-root 8000.001970947e2d
designated-cost 0
designated-bridge 8000.001970947e2d
designated-port 32770
[ok][2013-01-24 14:27:15]