Specifications

18 MDS Orbit MCR-4G Technical Manual MDS 05-6628A01, Rev. A
Step 2: Instruct the device to enter configuration mode by typing “configure” and pressing the enter key:
admin@(none) 04:51:06> configure
Entering configuration mode private
[ok][2012-06-20 04:51:07]
[edit]
admin@(none) 04:51:07%
Step 3: Change the device name by typing in the following, followed by enter: set system name Device539
admin@(none) 05:31:14% set system name Device539
[ok][2012-06-20 05:32:45]
[edit]
admin@(none) 05:32:45%
Step 4: Verify the change looks correct by reading the data back using the following, followed by the enter
key: show system name
admin@(none) 05:32:53% show system name
name Device539
[ok][2012-06-20 05:35:28]
[edit]
admin@(none) 05:35:28%
Step 5: Commit the change by typing in the following, followed by the enter key: commit
admin@(none) 05:36:20% commit
Commit complete.
[ok][2012-06-20 05:36:21]
[edit]
admin@(none) 05:36:21%
Step 6: Exit the configuration mode by typing the following, followed by the enter key: exit
admin@(none) 05:40:15% exit
[ok][2012-06-20 05:40:17]
admin@(none) 05:40:17>
Step 7: Exit the login session by typing the following, followed by the enter key: exit
admin@(none) 05:40:32> exit
(none) login: