Specifications
Table Of Contents
- Preface
- Quick Start Guide
- Table of Contents
- Chapter 1 General Information
- Functional Description
- Physical Description
- Application Considerations
- Basic MX-2100 System
- Redundancy (not for MX-2104)
- Dual Link Operation (not for MX-2104)
- Priority Bumping \(not for MX2104\)
- Switched Backup Operation (not for MX-2104)
- Switch Mode
- System Management
- System Timing Considerations
- DTE Timing (KML.1, KML.2, KML.3, KML.4 and KML.10 Modules)
- External DCE Timing (KML.1, KML.2, KML.3 and KML.4 Modules)
- DCE Timing (KML.1, KML.2, KML.3 and KML.4 Modules)
- Internal Timing (KML.5, KML.6, KML.7, KML.8, and KML.F Modules)
- Loopback Timing (KML.5, KML.6, KML.7, KML.8, and KML.F Modules)
- DCE Timing (KML.7, KML.8, and KML.F Modules)
- Main Link Timing Considerations in Bypassing and Multidrop Configurations
- Data Channel Clock Modes
- Timing Modes of ISDN Channels
- Sub Link Timing
- Main Link Interface Characteristics
- V.35 Interface (Module KML.1)
- RS-232 Interface (Module KML.2)
- V.36/RS-422/RS-530 Interface (Module KML.3)
- X.21 Interface (Module KML.4)
- G.703 Codirectional Interface (Module KML.5)
- Standard DDS CSU/DSU (Module KML.6)
- T1 Link Interface (Module KML.7)
- E1 Link Interface (Module KML.8)
- ISDN "S" Interface (Module KML.10/S)
- ISDN "U" Interface (Module KML.10/U)
- Fiber-Optic Link Interface (Module KML.F)
- I/O Module Applications
- Technical System Characteristics
- Chapter 2 Installation
- Introduction
- Site Requirements and Prerequisites
- Input Power Requirements
- Grounding
- Channel Connection Considerations
- Front and Rear Panel Clearance
- Ambient Requirements
- Electromagnetic Compatibility Considerations
- Current and Power Requirements of MX-2100 Power Supply Modules
- Current and Power Capabilities of MX-2100 Power Supply Modules
- Ratings of Ring and Feed Voltage Supplies
- Equipment Needed
- Package Contents
- Installation and Setup of MX-2100
- Interfaces and Connections
- Initial Setup and Configuration
- Chapter 3 Configuring MX-2100
- Chapter 4 Operation
- Chapter 5 Diagnostics
- Appendix A Connection Data
- Appendix B Alarms
- Appendix C SNMP Management
- Appendix D Software Download
- Appendix E Configuration Parameters
- Appendix F Command Set Description
- General
- Commands
- BYE
- CLR ALM
- CLR LOOP
- CLR MONITOR
- CONNECT SWITCH
- DATE
- DEF AGENDA
- DEF AGENT
- DEF ALM DEBOUNCE
- DEF CALL
- DEF CH
- DEF CON
- DEF DB FLIP
- DEF DP
- DEF FRAME
- DEF MANAGER LIST
- DEF ML
- DEF ML CALL
- DEF NAME
- DEF NODE
- DEF NP
- DEF PWD
- DEF ROUTE
- DEF SP
- DEF SYS
- DISCONNECT SWITCH
- DSP AGENT
- DSP ALM
- DSP BERT
- DSP CH CON
- DSP FLIP
- DSP HDR TST
- DSP MANAGER LIST
- DSP KVF5orDSP PBX
- DSP KVF6
- DSP SIGNALINGorDSP SIG
- DSP PRBS_INJ
- DSP REM AGENT
- DSP REV
- DSP ST FRAME
- DSP ST ML
- DSP ST SLOT
- DSP ST SYS
- EDIT DB
- EXIT
- F
- FLIP ML
- HELP
- INIT DB
- INIT F
- LOAD DB 1\2
- LOAD IO
- LOOP
- ML RECOVERY
- MONITOR
- REBUILD FRAME
- RESET LOC
- RESET IO
- RESET ML
- TIME
- UPDATE DB 1\2
- Index
- DC Power Supply Connection
SAFETY WARNINGS
Always observe standard safety precautions during installation, operation and maintenance of this
product. Only qualified and authorized service personnel should carry out adjustment,
maintenance or repairs to this instrument. No adjustment, maintenance or repairs should be
performed by either the operator or the user.
WARRANTY FOR PRODUCTS MANUFACTURED BY
MICROWAVE DATA SYSTEMS, INC.
A. MICROWAVE DATA SYSTEMS, INC. (MDS) products, except as stated otherwise in an
applicable price list, are warranted against defects in workmanship and material for a period
of one (1) year from date of delivery as evidenced by MDS's packing slip or other
transportation receipt.
B. MDS’s sole responsibility under this warranty shall be to either repair or replace, at its
option, any component which fails during the applicable warranty period because of a defect
in workmanship and material, provided PURCHASER has promptly reported same to MDS
in writing. All replaced Products or parts shall become MDS's property.
C. MDS will honor the warranty at MDS's repair facility in Rochester, New York. It is
PURCHASER's responsibility to return, at its expense, the allegedly defective Product to
MDS. PURCHASER must obtain a Return Material Authorization (RMA) number and
shipping instructions from MDS prior to returning any Product under warranty.
Transportation charges for the return of the Product to PURCHASER shall be paid by MDS
within the United States. For all other locations, the warranty excludes all costs of shipping,
customs clearance and other related charges. If MDS determines that the Product is not
defective within the terms of this warranty, PURCHASER shall pay MDS all costs of
handling, transportation and repairs at the then prevailing repair rates.
D. All the above warranties are contingent upon proper use of the Product. These warranties
will not apply (i) if adjustment, repair or parts replacement is required because of accident,
unusual physical, electrical or electromagnetic stress, neglect, misuse, failure of electric
power, environmental controls, transportation, not maintained in accordance with MDS
specifications, or abuses other than ordinary use; (ii) if the Product has been modified by
PURCHASER or has been repaired or altered outside MDS's repair facility, unless MDS
specifically authorizes such repairs or alterations; (iii) where MDS serial numbers, warranty
data or quality assurance decals have been removed or altered.
E. MDS also reserves the right to make product improvements without incurring any obligation
or liability to make the same changes in Products previously manufactured or purchased. In
no event shall MDS be liable for any breach of warranty in an amount exceeding the net
selling price of any defective Product. No person, including any dealer, agent or
representative of MDS is authorized to assume for MDS any other liability on its behalf
except as set forth herein. Non-payment of any invoice rendered within the stated payment
terms automatically cancels any warranty or guarantee stated or implied. If any payment is
due MDS for services performed hereunder, it shall be subject to the same payment terms as
the original purchase.
F. EXCEPT FOR THE EXPRESS WARRANTIES STATED HEREIN, MDS DISCLAIMS
ALL WARRANTIES ON PRODUCTS FURNISHED HEREUNDER, INCLUDING,
WITHOUT LIMITATION, ALL IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS; and the stated express warranties are in lieu of all obligations or liabilities
on the part of MDS arising out of or in connection with the performance of the Products.