Specifications

MX-2100/2104 Installation and Operation Manual I-1
Index
—A—
ACTIVE_ML, 3-10
Alarm Messages, 5-1
Application Considerations
Basic System Structure, 1-16
Data Channel Clock Modes, 1-45
Dual Link Operation, 1-22
Main Link Interface Characteristics, 1-48
Priority Bumping, 1-27
Redundancy, 1-20
Sub Link Timing, 1-48
Switch Mode, 1-30
Switched Backup Operation, 1-28
System Timing Considerations, 1-39
Timing Modes of ISDN Channels, 1-47
AUTOBAUD Function, 2-10
Automatic IP Traffic Routing, C-6
AUXILIARY_DEVICE, E-8
—B—
B CH, E-6
Basic Dual-Link Configurations, 1-22
Basic System Structure, 1-16
BERT Testing, 5-14
BUFFER_SIZE, 3-11, E-4
Bypassing Configurations, 1-23
—C—
Channel Parameters - Specific Configuration
Instructions, 3-12
Checking Current Operating Config, 4-10
Clear to Send, 2-10
CLK_FBACK, 3-9, E-2
CLK_MASTER, 3-9, E-1
Clock Modes, 1-45
CODE, E-5
Cold (Local) Installation Procedure, D-1
Commands, F-2
Language Syntax, 4-1
Options, 4-2
Protocol, 4-3
Common Logic Module, KCL.2, A-1
DP Connector, A-3
Communication Port, 1-38
Configuration Error Messages, B-10
Connection Data
Common Logic Module, KCL.2, A-1
DC Power Input Connector, A-4
Connection Methods, 2-9
Control Logic Modules, 1-10
Control Session, 4-15
CRC-4, E-5
CTS, 2-10, E-7
Current and Power
Power Supply Modules, 2-3, 2-6
—D—
Data, 3-12
DATA, E-7
Data Carrier Detect, 2-10
Data Channel Clock Modes, 1-45
Data Set Ready, 2-10
Data Terminal Ready, 2-9
DC Power
Input Connector, A-4
DCD, 2-10
DCD_DEL, E-7
DCE Timing, 1-42
Description, Functional, 1-1
Diagnostics
Capabilities, 1-6
LED, 5-1
ML, 5-2
Dial Port Connector, 1-38
Downloading Procedure
General, D-3
Single KCL.2, D-2
DP Connector, A-3
DSR, 2-10, E-7
DSR&CTS, 3-11, E-4
DTE Timing, 1-40
DTR, 2-9
Dual Link Operation
Basic Dual-Link Configurations, 1-22
Bypassing Configurations, 1-23
Multidrop Configurations, 1-26
DWLD_BW_A, E-2
DWLD_BW_A, DWLD_BW_B, 3-9
DWLD_BW_B, E-2