Specifications

MX-2100/2104 Installation and Operation Manual Appendix F Command Set Description
Commands F-49
NAME = [mux name]
LAST RESET = [date and time of last reset on KCL.2]
ON LINE DATABASE = 1
NODAL CLOCK = ML
ACTIVE ML = ML-A
ACTIVE ML TIMING = DTE
ML MODE = SINGLE
MONITOR = NONE
ALARM RELAY = ON
INSTALLED MODULES:
ML/IO: ML-A ML-B OPTION 1 2 3
DB: ML --- --- --- KLS.1/N ---
HW: ML.1 --- --- --- KLS.1/N ---
IO: 4 5 6 7 8 9
DB: --- KVF.5/E1/M --- --- --- KVF.4/S0
HW: --- KVF.5/E1/M --- --- --- KVF.4/S0
IO: 10 11 12
DB: --- --- ---
HW: --- --- ---
TIME:08:14:34 DATE:Mon Jun,08,1998
The display fields are as follows:
• NAME - Lists the logical name assigned to MX-2100.
• LAST RESET - Displays the date and time of the last reset on KCL.2.
• ON LINE DATABASE - Indicates the number of the active database:
1 or 2.
• NODAL CLOCK - Indicates the source for the link transmit clock: the internal
oscillator, a module channel, or the main link (ML). ML can only appear when
the main link timing mode is DTE. Refer to the Configuration Parameters
appendix for additional information.
• ACTIVE ML - Indicates the currently-active KML module(s): ML-A for the KML
module installed in slot 3, and/or ML-B for the module installed in slot 4, or
BOTH for a MX-2100 operating in the dual link, priority bumping or switched
backup mode.
• ACTIVE ML TIMING - Source clock of the agent.
• ML MODE - Indicates the current main link mode: SINGLE, REDUNDANCY,
DUAL LINK, PRI_BMP, SW_BACK.
• MONITOR - Indicates the module channel monitored by means of the
MX-2100 front panel indicators, or NONE.
• ALARM RELAY - Indicates the status of MX-2100 alarm relay contacts: ON or
OFF.
• INSTALLED MODULES - Lists, for each slot, the installed module and the
module programmed in the database.