Specifications

Appendix F Command Set Description MX-2100/2104 Installation and Operation Manual
F-6 Commands
DEF AGENDA
Purpose
Define the daily schedule of utilization of the switched backup mode. Separate
schedules can be defined for each day of week. Each 24-hour schedule includes
up to four independent periods, defined by the starting and ending time (hour and
minutes). For each period, you can enable or disable the use of a switched backup
link.
Format
DEF AGENDA [day]
where
day stands for SUN, MON, TUE, WED, THU, FRI or SAT.
Use
1. To select the schedule for a specific day, e.g., for Sunday, type:
DEF AGENDA SUN <ENTER>
The first part of the daily schedule parameters data form is displayed. A
typical data form is shown below:
[——Zone 1——] [——Zone 2——] [——Zone 3——] [——Zone 4——]
START END/START END/START END/START END
00:00 hh:mm hh:mm hh:mm 24:00
where:
hh - hour (00 through 23)
mm - minutes (00 through 59)
2. Change parameters as follows:
 Bring the cursor to the beginning of the first field to be changed by
pressing the space bar.
 Change the selected field by pressing F or B to scroll among the
available selections. When the desired selection is displayed, press the
space bar to move to the next field.
3. After the desired parameter values are selected, press ENTER to end.
MX-2100 will display the time and date fields, followed by the MX-2100
prompt.
4. After the last change, press ENTER.
The second line of the data form, used to control the use of the switched
backup link, is displayed:
[——Zone 1——] [——Zone 2——] [——Zone 3——] [——Zone 4——]
START END/START END/START END/START END
00:00 hh:mm hh:mm hh:mm 24:00
BACKUP: YES YES NO YES