Technical information

System Installation and Setup
4–4
HiTest Notes for Lotus Domino Windows NT Prioris MX
Management Station Installation
If you have selected a Management Station, use the instructions in this section to install and
configure the hardware and software on the management station and the software on the
system[s] being managed.
Hardware Installation
Install the Management Station hardware using the instructions in the Prioris XL 6000 Quick
Reference Guide provided with your Prioris XL 6000 system.
Software Installation
This section describes how to install the Management Station software, including the
Windows NT Server operating system, SQL Server, Systems Management Server (SMS), and
the SMS agents.
Operating System Installation
Install and configure the Windows NT Server operating system using the Microsoft Windows
NT Server Start Here (Basics and Installation) manual. Install Windows NT Service Pack 3
(SP3).
Make sure that you have the following information, which is required to complete the
installation:
• Product key or CD key – The Product key is a 20-digit number that appears on the
certificate of authenticity for Windows NT 4.0. The certificate of authenticity for
Windows NT 4.0 is attached to the cover of the Microsoft Windows NT Server Start Here
(Basics and Installation) manual.
The CD key is a 10-digit number that appears on the case that contains the Quick Launch
CD.
• The following items, which can be obtained from your network administrator:
− Unique name to identify your computer on the network
− Your Workgroup/domain name
− Your IP address
Management Station
The System Management Station manages the servers and workstations on your network
using Systems Management Server (SMS). Using SMS, you can monitor network activity and
distribute software packages and audit and inventory hardware and software.
To use SMS you must first install SQL Server on the machine that will become the SMS
server. SMS stores all of its data in the SQL database.
SQL Server Installation
To install SQL Server Version 6.5, refer to the Microsoft SQL Server Setup Guide and the
Microsoft SQL Server Administrator’s Companion as you complete the following steps:
1. Make sure that you have 100 MB of space for the SQL Master Device.
2. Insert the SQL Server CD-ROM and run <drive>:\setup.exe where <drive> is
replaced with the CD-ROM drive designation on your system.
3. When SQL Server installation prompts for the “sa” account password, leave it blank.
Even if you enter a password at this point, it is not used by SQL Server after installation.