Technical information

HiTest Notes for Lotus Domino Windows NT Prioris MX 3–1

Configuration Data

This chapter describes the Lotus Domino Windows NT Prioris MX DIGITAL HiTest Suite

including the hardware, software, and firmware components and their revision levels. If

required, special configuration rules are explained.

Hardware and Software Components

Table 3-1 and Table 3-2 identify the range of hardware and software components that can be

configured using the Lotus Domino Windows NT Prioris MX HiTest Suite. These two tables

form the DIGITAL HiTest Template. The ranges of hardware provided in this template

include 64 MB through 320 MB of memory, one through four 4.3 GB disks, one PCI RAID

controller, one Fast Ethernet controller, and one 4/8 GB DAT tape drive.

Table 3-3 lists the optional system management station hardware and software.

Table 3-4 lists the revision levels of the components.

The DIGITAL HiTest Template consists of three categories:

• AppSet Software – Includes software specific to one class of customer solutions, in this

case Domino Server

• Foundation Hardware – Includes the base system, storage, and other hardware options

• Foundation Software – Consists of the operating system software and the service pack

and backup utility for the operating system

When ordering an item from a HiTest Template, select a quantity that is within the minimum

and maximum range for the item. If the minimum quantity is zero (0), then the component is

optional. If the minimum quantity is one or more, order at least the minimum quantity, but

be cautious about exceeding the maximum quantity. The maximum quantity represents the

greatest number of components that were tested for interoperability with all the other

components in the Suite.

For more details on the HiTest Suite hardware configuration, see Chapter 7.