User`s guide

MDS 05-2806A01, Rev. E.1 MDS iNET 900 Series User’s Guide 151
6.5 SNMP USAGE NOTES
6.5.1 Overview
The firmware release described in this manual contains major changes
to the transceiver’s SNMP Agent, several new MIB variables, and new
Agent configuration options. This guide reviews the changes and shows
how to properly configure the Agent to take advantage of these new fea-
tures.
SNMPv3 Support
The updated SNMP Agent now supports SNMP version 3 (SNMPv3).
The SNMPv3 protocol introduces Authentication (MD5/SHA-1),
Encryption (DES), the USM User Table, and View-Based Access
7 55 919.9075
8 56 920.2240
8 57 920.5405
8 58 920.8570
8 59 921.1735
8 60 921.4900
8 61 921.8065
8 62 922.1230
8 63 922.4395
9 64 922.7560
9 65 923.0725
9 66 923.3890
9 67 923.7055
9 68 924.0220
9 69 924.3385
9 70 924.6550
9 71 924.9715
10 72 925.2880
10 73 925.6045
10 74 925.9210
10 75 926.2375
10 76 926.5540
10 77 926.8705
10 78 927.1870
(iNET II DTS highest channel)
10 79 927.5035
(iNET FHSS highest channel)
Table 6-4. Channel Hop Table (Continued)
Zone Channel Frequency