Owner`s manual

MOUNTING LOCATION

Before you start the installation, it will be necessary to find a mounting location for the

amplifier. Find a location in which the amplifier will receive adequate ventilation in order

to dissipate the heat it develops during operation. Two popular mounting locations are in

the trunk or under the seat.

Select the location in which you wish to mount the amplifier. Use caution when mounting

amplifier, there are many wires, gas lines, vacuum lines, brake lines as well as a gas tank

in the automobile. Make sure you know where they are when mounting the amplifier to

avoid puncturing lines, shorting wires or drilling holes in the gas tank. Once you are

ready, use a pencil to mark the mounting holes in the bottom panel. After you have

marked the locations of the holes move amplifier out of the way and drill small starter

holes to make the tapping screws easier to install. Use provided screws to tighten down

the amplifier.

FILTER

LPF

FULL

HPF

BASS BOOST

REMOTE

12dB

OdB

X-OVER

400Hz

40Hz

GAIN

MAX

MIN

POWER

INPUT

OUTPUT

HI-INPUT

REAR

FRONT

PROTECT

+ L -

+ R -

+ L -

+ R -