User manual

12 13
Step 5
on
off
Volume
Dial
Step 4
a)
b)
c)
Step 5: Turn the MDHearingAid
®
AIR On
The MDHearingAid
®
AIR uses a Volume Dial
with a built in on/off switch (like a radio).
• To turn the Hearing Aid on, turn the
Volume Dial upward, past the click.
• To turn the Hearing Aid off, turn the
Volume Dial downward until you feel a click.
IMPORTANT:WhentheHearingAidisturned
on,itwilltakeafewsecondstobeginamplifying
sound.PleaseraisethevolumeSLOWLY
toavoidsuddenblastofsound.
WARNING: Whistlingmaybeheardifthe
HearingAidisturnedonbutnotpositioned
securelyinyourear.Thisisnormal.Once
theEarDomeisproperlyinsertedinyour
ear,thewhistlingwillstop.
Step 4: Place Hearing Aid Behind Ear
a) Insert Ear Dome into the ear canal
until the Ear Dome ts securely.
Formoredetailsseepicturesonpage9.
b) Place the Hearing Aid Body behind the
ear so the curve of the AIR Tubing rests
comfortably on the top of ear in front of
any eye wear.
c) Tuck the Stabilizer Bar in the outer bowl
of the ear.
Please note:TheStabilizationBar
isoftenhiddenwhentuckedinthe
outerbowloftheearandisnot
shownonthecoverofbox.