Operating Instructions and Installation Instructions

X
32
17-CLEANING
CLEANING THE SMOKE DUCT AND GENERAL CHECKS
Clean the smoke extractor duct, especially around the “T” joints, bends and any horizontal sections.
For information on cleaning the ue, contact a chimney sweep.
Check the seal of the ceramic bre gaskets on the door of the stove. If necessary, order new replacement seals from the retailer or contact
an authorized service centre to carry out this task.
CAUTION:
The frequency with which the smoke outlet system is cleaned depends on the use of the boiler and the type of
installation.
We recommend relying on an authorised service centre for end-of-season cleaning and maintenance, as they will
carry out all of the previously mentioned work and inspect the stove components.
PERIODICAL CHECK OF THE DOOR CLOSURE
Make sure the door closure ensures a correct sealing action (with the “paper sheet” test) and that when the door is closed, the closing block
(X in the gure) does not protrude from the sheet metal to which it is secured. For some products it will be necessary to disassemble the
cladding to be able to assess the anomalous protrusion of the block when the door is closed.