Operating Instructions and Installation Instructions

27
17-CLEANING
Technical Dept. - All rights reserved - Reproduction is prohibited
CLEANING THE AIR FILTER
A wire mesh air lter is found at the back of the stove, whose purpose is to prevent dirt entering the motor body and the internal sensor.
It is recommended to check that the lter is clean every 15/20 days. If needed remove u or the material that has deposited on it.
Inspection and cleaning are required more frequently if there are pets in the house.
Simply remove the lter to clean. To clean it use a brush or a damp cloth or compressed air. Set it back in place by simply pressing it
(interlocks).
The lter is made of metallic mesh and is soft and exible to the touch therefore, when cleaning, be careful not to
crush or damage it. In the event of breakage it must be replaced.
ATTENTION!
Never let the stove work without the air lter tted. MCZ cannot be held liable for any damage caused to the internal
components if this requirement is not complied with.