Operating Instructions and Installation Instructions
16
11-REMOTE CONTROL MAX
Modifying the pellet recipe
This function is for adapting the stove to the type of pellet in use. As there are many types of pellet available on the market, operation of
the stove can vary considerably according to the quality of the fuel.
The amount of pellets in the brazier can be increased or reduced:
• If the pellets tend to jam in the brazier due to an excess of fuel
• If the ame is increasingly higher even at low power values
• Proceed as follows if the ame is always low in order to change the recipe:
• Set the two selectors to OFF (the stove must not be in an alarm status)
• Press the TEST button for 5/9 seconds (the stove emits 5/9 beeps)
• Release the TEST key
• The code PLt appears on the display
• Press the chased button to increase or reduce the desired amount of pellets.
Available values:
- 3 = Reduction of pellet loading by 20% at all power values
- 2 = Reduction of pellet loading by 13% at all power values
- 1 = Reduction of pellet loading by 6% at all power values
0 = no change
1 = Increase of pellet loading by 10% at all power values
2 = Increase of pellet loading by 6% at all power values
3 = Increase of pellet loading by 3% at all power values
• Press the TEST key once to conrm