Operating Instructions and Installation Instructions

11-REMOTE CONTROL MAX

The emergency panel is found at the back of the stove. The panel is used to detect any malfunctions and also for product control if the

remote control is not working.

KEY

A - DISPLAY; indicates a series of information on the stove, as well

as the identication code of any malfunction.

B - GREEN LED that indicates:

• OFF = Stove o

• FLASHING ON = Stove in ignition stage

• FIXED ON = Stove on

C - RED LED that indicates:

• OFF = Stove on

• ON WITH SLOW FLASHING = Stove in shutdown stage

• ON WITH FAST FLASHING = Stove in alarm conditions

(combined with a beep sound for the rst 10 minutes)

• FIXED ON = Stove o

D - Three-position selector for the following functions

• OFF = Stove switched o manually without remote control

• REMOTE = Stove controlled exclusively from the remote

control

• ON = Stove switched on manually without the remote control

E - Three-position selector to select the power

• MIN = Selector to make the stove work at MINIMUM power

without the remote control and with selector 4 on ON

• MED = Selector to make the stove work at MEDIUM power

without the remote control and with selector 4 on ON

• MAX = Selector to make the stove work at MAXIMUM

power without the remote control and with selector 4 on

F - Button for diagnostic functions relating to the operating

status of the stove

G - Button to put the stove in communication with a new remote

control (via the procedure explained in the Remote Control

Synchronisation" paragraph)

H - Reception antenna

SELECTOR "D" MUST BE SET ON "REMOTE" TO

MAKE THE STOVE OPERATE WITH THE REMOTE

CONTROL.