Operating Instructions and Installation Instructions
S
T
f
42
9-LOADING THE PELLETS
LOADING THE PELLETS
The fuel is loaded from the top of the stove by lifting rear top hatch “S” and pellet loading door “T”. To open door “T”, insert the cold handle
into the designated hole “f”.
Pour the pellets in slowly so that they are deposited at the bottom of the hopper.
If loading pellets when the stove is running, open the door of the tank using the stove mitten that comes with the
stove itself.
When loading, do not let the pellet bag come into contact with hot surfaces.
Never remove the protection grid inside the hopper.
No other type of fuel other than pellets is to be inserted into the hopper, in compliance with above-mentioned
specications. Store the spare fuel at an adequate safe distance.
Do not pour pellets directly onto the brazier but only into the hopper.
When the appliance is running and when it is turned o, most of the stove surfaces are very hot (door, handle, glass,
smoke outlet pipes, etc.). Therefore it is recommended to avoid coming into contact with these parts.