Operating Instructions and Installation Instructions
C
D
E
T3
T3
T3
T3
M
M
M
M
M
D
E
M
D
C
33
5-CLADDING ASSEMBLY
Technical Dept. - All rights reserved - Reproduction is prohibited
HOW TO USE THE TEMPLATE TO SECURE THE SIDE CERAMIC PANEL (same procedure for the right and left panel)..
Attention! With template “M” start to position the rst ceramic panel at the top.
After removing frame “T3” from the structure of the stove, in line with the instructions reported in the above paragraph, take template “M”
to position the ceramic panel and secure it at the top of frame “T3” with the screws supplied.
As described above, secure ceramic panel “C” to frame “T3” by ensuring that the top of the ceramic panel rests against template “M”.
Remove template “M” and place it under ceramic panel “C”. Then place ceramic panel “D” on the panel and secure it. Then remove template
“M” again and position it under ceramic panel “D” to x it to ceramic panel “E” with the same system. Remove template “M” to x the next
ceramic panels.
Secure the frame with the ceramic panel to the stove, as specied in the instructions.