Operating Instructions and Installation Instructions

T2
T2
B
B
M
M
M
M
P
28
5-CLADDING ASSEMBLY
HOW TO USE THE TEMPLATE TO SECURE THE TOP FRONT CERAMIC PANEL
After removing frame “T2” from the structure of the stove, in line with the instructions reported in the above paragraph, take template “M”
to position the ceramic panel and secure it at the top of frame “T2” with the screws supplied.
As described above, secure ceramic panel “B” to frame “T2” by ensuring that the top of the ceramic panel rests against template “M”. After
mounting ceramic panel “B”, remove template “M”, which will be used for the other ceramic panels.
Secure the frame with the ceramic panel to the stove, as specied in the instructions.
CERAMIC ADJUSTMENT FLAPS
The frame of the ceramic panels is tted with aps (“P”), which
are required to ensure the ceramic parts remain in place and that
during operation they do not generate vibrations.
Try and mount the ceramic panels as described in these pages. If
the panel remains loose in relation to the frame, push out aps
“P” so that they touch the ceramic surface, thereby ensuring the
ceramic panels remain xed in place.