Operating Instructions and Installation Instructions
18
3-DRAWINGS AND TECHNICAL FEATURES
TECHNICAL CHARACTERISTICS CURVE COMFORT AIR
Nominal output power 8,1 kW (6966 kcal/h)
Minimum power output 2,3 kW (1978 kcal/h)
Eciency at Max 90,9%
Eciency at Min 92,6%
Temperature of exhaust smoke at Max 188 °C
Temperature of exhaust smoke at Min 89 °C
Particulate /OGC / Nox (13%O
2
) 17 mg/Nm3 - 1 mg/Nm3 - 142 mg/Nm3
CO at 13% O
2
at Min and at Max 0,002 – 0,043%
CO
2
at Min and at Max 6,4% - 14,0%
Recommended draught at Max*** power 0,10 mbar - 10 Pa***
Minimum draft allowed at minimum power 0,05 mbar - 5 Pa
Smoke mass 4,3 g/sec
Hopper capacity 32 litres
Type of pellet fuel Pellet diameter 6-8 mm and size 3/40 mm
Pellet hourly consumption Min ~ 0,5 kg/h* - Max ~ 1,8 kg/h*
Autonomy At min ~ 40 h* - At max ~ 11 h*
Heatable volume m
3
174/40 – 199/35 – 232/30 **
Combustion air inlet Ø 50 mm
Smoke outlet Ø 80 mm
Air intlet 80 cm
2
Rated electrical power (EN 60335-1) 81 W (Max 380 W)
Supply voltage and frequency 230 Volt / 50 Hz
Net weight 170 kg
Weight with packaging 180 kg
Distance from combustible material (rear\sides\oor): 120/200/0 mm
Distance from combustible material (ceiling\front): 800/1000 mm
* Data that may vary depending on the type of pellets used
** Volume that can be heated, according to the power requirement per m
3
(respectively 40-35-30 Kcal/h per m
3
)
***Value recommended by the manufacturer (non-binding) for optimal product operation
Tested according to EN 14785 in accordance with European regulation for Construction Products (EU 305/2011).