Specifications

Catalog 1301 / Page 13 of 32
Notes:
For illustration purposes only. Not all options available with all models.
Consult a McQuay Sales Representative for details and availability.
1. Installation of the PDAE/PDHE 16" × 44" chassis into an existing MEA, EA,
PMES, PMRS, PMEG cabinet/wall sleeve requires a new cabinet front panel
and grille assembly (kit # 668375250), see IM 875 (www.mcquay.com).
2. Installation of the PDAE/PDHE 16" × 44" replacement chassis into an existing
ES/RS/MQT wall sleeve requires a new cabinet front panel and block-off plate
(kit # 668375221), see IM 883 (www.mcquay.com).
Other Customization Options
• Custom Sleeve - Extended depths, brick stops, or
support legs can be added for panel wall or
curtain wall applicatons.
• Custom Cabinet - Extended depths, colors, kickplates
• Factory-installed valves and hydronic coils
• Power Vent - Indoor Air Quality (IAQ) option
Description Unit Size
Unit Type - PDAE/PDHE 007 009 012 015 017
16 × 44 Top Mount Hydronic
• • • • •
Cabinet Type
16 × 44 Flat Top Replacement Unit
• • • • •
115/60/1
• • •
Voltage
208/230/60/1
• • • • •
265/277/60/1
• • • •
208/230-60/1 w/ standby 115/60/1
• • • • •
Cooling Capacity BTUH 7,900 10,500 12,800 14,800 17,000
Heating Options
2.5
• • • • •
Electric Heater (kW) 3.5
• • • • •
5.0
• • •
Hydronic - Hot Water or Steam
• • • • •
Heat Pump
• • • • •
Heat Pump with Supplemental Electric Heat
• • • • •
Air Flow CFM - High/Low Speed in Heating 380/340
• • • •
550/380
Outside Air Damper - Vent - CFM-High/Low Speed 50/40
• • • •
70/50
Damper
Auto Damper Control (Standard for most Hydronic Heat)
• • • • •
Manual Damper Control (Not available for most Hydronic Heat)
• • • •
Unit Mounted Non-programmable
• • • • •
Unit control Unit Mounted Programmable
• • • • •
Remote, Hand Held IR
• • • • •
Seacoast Coating Package
• • • • •
Model PDAC/PDHP Quick Selection Guide
Chassis Customization Options
= Not Applicable