McQuay PDAA : Specifications : Page 22

Page 22 of 48 IM 934-5

PTAC Startup Report–Audit

Job Name __________________________________________ City ________________ G.O. # ____________

Installer __________________________________________________________________ Total No. of Units_____

Date of Final Inspection and Start-up ________________________________________ Unit Type

Manufacturers’ Representative Name ___________________________________ □ APTAC 16 × 42 □ Type K

□ APTAC 16 × 44 □ Type J

□ Enersaver

Name of Maintenance Manager Instructed ___________________________________ Other__________________

Essential Items Check

A. Voltage Check _____________ Volts (measured)

B. Yes No Condition Yes No Condition

□ □ Filters Clean □ □ Operates in Heating

□ □ Evaporator Coils/Drain Pans Clean □ □ Operates in Cooling

□ □ Wall Boxes Sealed To Wall, No Leaks □ □ Operates in Fan Only (if so equipped)

□ □ Wall Box Pitch Satisfactory □ □ Hi-Lo Fan Speed Operational (if so equipped)

□ □ Air Discharge Free of Obstruction □ □ Fans Rotate Freely Without Striking Fan Housing

□ □ Condenser Air Free of Obstruction □ □ Cycle/Continuous Fan (if so equipped)

□ □ Other Conditions Found: ___________________________________________________________

_______________________________________________________________________________

Note: “No” answers above require notice to installer by memorandum (attached copy).

Please include any suggestions or comments: _______________________________________________________

____________________________________________________________________________________________

Above System is in Proper Working Order FOR INTERNAL USE

Release:

Date SM ______________

CTS _____________

Sales Representative Signature T________________

Customer Signature Service Manager Approval

Date

Form No. 13F-1206