Technical data
OM 1191 35
Parameters
Table 19 continued: Group 34: Panel Display
3407 OUTPUT1 MAX
Depends
on
selection
—
1000.0
(%SP)
Sets the maximum value displayed for the rst display parameter.
Note:
Parameter is not effective if parameter 3404 OUTPUT1 DSP FORM = 9 (DIRECT).
3408 SIGNAL 2 PARAM 100…178 1 104
Selects the second parameter (by number) displayed on the control panel. See parameter 3401.
3415 SIGNAL3 PARAM 100…178 1 120 (AI 1)
Selects the third parameter (by number) displayed on the control panel. See parameter 3401.
3418 OUTPUT3 DSP FORM 0…9 1 5 (+0.0)
Denes the decimal point location for the third display parameter. See parameter 3404.
3420 OUTPUT3 MIN
Depends
on
selection
—
0.0 mA
3421 OUTPUT3 MAX
Depends
on
selection
— 20.0 mA
Sets the maximum value displayed for the third display parameter. See parameter 3407.