Specifications

80
8.2 SLM WIRED CONTROLLER (MODEL : M4RT080/100A/AR; MODEL: MRT080/100 A/AR OPTIONAL)
1. “ON/OFF” switch
• Press to start the air conditioner unit.
• Press again to stop the unit.
2. Temperature setting
• Set the desired room temperature.
• Press button to increase or decrease the set
temperature. Setting range are between 16
o
C to 30
o
C
(60
o
F to 80
o
F).
3. Operation Modes
• Press the “mode” button for select the type of
operating mode.
- Cooling Only :
COOL, DRY, FAN
- Heat Pump :
AUTO, COOL, DRY, HEAT, FAN
(AUTO mode is represented by both COOL and
HEAT LED light on)
4. Fan Speed selection.
• Press the button until the desired fan speed is
achieved.
5. Timer.
•Press the set button to select the switch timer of the air
conditioner unit (the setting range is between 1 to 10
hours).
6. “Sleep” mode
• Press button to activate the sleep function. This function
can only be activated under “cool” or heating mode
operation. When it is activated under “cool” mode
operation, the set temperature will increase 0.5
o
C after
30 minutes, 1
o
C after 1 hour and 2
o
C after 2 hours. If it
is activated under “HEAT” mode operation, the set
temperature will be decreased 0.5° C after 30 minutes,
1° C after 1 hour and 2° C after 2 hours.
7. Air Swing
• Press button to activate the automatic air swing
function.
8. Sensor
• Infra red sensor to receive signals from wireless
controller.
9. LED display
• To display the set temperature (in º C) and timer delay
setting (in hours).
10. Transmission source
• To transmit signals to the air conditioner.