Specifications

4
Specifications
Cooling Model (50Hz – R22)
MODEL MRT060A MRT120A
TOTAL kcal/h
14868 29232
COOLING kW
17.3 34.0
CAPACITY Btu/h
59000 116000
SENSIBLE kcal/h
10259 21047
COOLING kW
11.9 24.5
CAPACITY Btu/h
40710 83520
RATED TOTAL POWER INPUT W
5610 11560
RATED RUNNING CURRENT
A
10.5 22.1
POWER SOURCE V/Ph/Hz
CAPACITY STEPS %
0-100 0-100
REFRIGERANT
REFRIGERANT CHARGE
kg
5.2 6.2
REFRIGERANT CONTROL
EVAPORATO
R
MATERIAL
THICKNESS mm/in
0.11 / 0.004 0.12 / 0.005
ROW / FIN PER INCH
3 / 16
4 / 14
FACE ARE
A
m
2
/ft
2
0.53 / 5.70 0.65 / 6.99
MATERIAL
WALL THICKNESS mm(in)
DIAMETER mm(in)
FAN
FAN MOTOR
NO OF FAN MOTOR / OUTPUT
1 / 0.75kW 1 / 1.5kW
CMM
50.97 101.94
AIR FLOW CFM 1800 3600
L/S
850 1699
mmAq
10 10
Pa
100 100
CONDENSER
FAN
FAN MOTOR
CMM
127.43 226.53
AIR FLOW CFM 4500 8000
L/S
2123 3776
CONTROL ROOM TEMPERATURE
OPERATION
DRAIN CONNECTION mm/in
HEIGHT mm/in
1000 / 39.4 1000 / 39.4
DIMENSION
WIDTH mm/in
1100 / 43.3 1300 / 51.2
DEPTH mm/in 1530 / 60.2 1530 / 60.2
NET WEIGHT kg
295 425
AIR FILTER
POWER SOURCE V/Ph/Hz
COMPRESSOR NO / TYPE
RATED RUNNING CURRENT A
8.0 17.1
RATED INPUT POWER
W
4540 9600
LOCK ROTOR AMPERE
A
74 110
SOUND PRESSURE LEVEL dBA 63 68
MATERIAL
EXTERNAL FINISHING
INSULATION
COLOUR
PACKING HEIGHT mm/in
1090 / 42.9
1090 / 42.9
DIMENSION
WIDTH mm/in
1250 / 49.2
1450 / 57.1
DEPTH mm/in 1680 / 66.1
1680 / 66.1
HIGH PRESSURE SWITCH FUSE.
PROTECTION DEVICES
OVERLOAD CURRENT RELAY
(
COMP. & INDOOR FAN
)
INTERNAL THERMOSTAT (COMP. & OUTDOOR FAN)
1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER WITHOUT PRIOR NOTICE.
2) ALL UNITS ARE BEING TESTED AND COMPLY TO ARI 210/240-94.
3) NOMINAL COOLING CAPACITY IS BASED ON THE CONDITIONS BELOW :
a) COOLING - 26.7°C DB / 19.4°C WB INDOOR AND 35°C DB OUTDOOR
4) ALLOWABLE OPERATING RANGE :
a) COOLING - 21.0°C DB / 15.0°C WB INDOOR & 20.0°C DB OUTDOOR TO 35.0°C DB / 24.0°C WB INDOOR & 46.0°C DB OUTDOOR.
9.52 / 0.375
A
LUMINIUM
FIN
TUBE
0.33 / 0.013
CENTRIFUGAL (GALVANISED STEEL) - BELT DRIVE
WASHABLE SARAN NET
25.4 / 1
THREE PHASE SQUIRREL CAGE INDUCTION MOTOR
THREE PHASE INDUCTION MOTOR
THERMISTER
SLM
EXTERNAL STATIC PRESSURE
PROPELLER - DIRECT DRIVE
EPOXY POLYESTER POWDER
380~415 / 3 / 50
R22 (FACTORY CHARGED)
TXV
380-415 / 3 / 50
CROSS FIN COIL
CROSS FIN COIL
SEAMLESS INNER GROOVED COPPER
PE (10mm)
MIT BROWN / SILK GREY
CASING
1 / SCROLL
GALVANISED MILD STEEL