Specifications

66
General Data - Heat pump (R22)
General Data - Heat pump (R22)
Btu/h
W
Btu/h
W
W
W
A
A
V/Ph/Hz
W/W
W/W
AIR DISCHARGE
OPERATION
AIR FLOWl/s / cfm
EXTERNAL STATIC PRESSURE Pa/in.wg.
mm/in
l/s / cfm
dBA
mm/in
mm/in
mm/in
mm/in
mm/in
mm/in
kg/lb
kg/lb
REFRIGERANT TYPE / CONTROL
R22 / TXV (HEATING), CAP TUBE (COOLING)
EER
COP
2.93
19./ 0.75
916 / 36
1386 /55
1045/ 41.1
1090 / 43
1650/3500
5128
10.2
9.4
850 / 1800
380 ~ 415 / 3 / 50
98 / 0.39
DUCTED
SLM CONTROLLER
3.41
MRT055AR
55000
16119
NOMINAL RUNNING CURRENT (HEATING)
NOMINAL TOTAL INPUT POWER (COOLING)
NOMINAL TOTAL INPUT POWER (HEATING)
NOMINAL RUNNING CURRENT (COOLING)
56500
16559
5778
POWER SOURCE
MODEL
CONTROL
EVAPORATOR*
NOMINAL COOLING CAPACITY
NOMINAL HEATING CAPACITY
CONDENSATE DRAIN SIZE
SOUND PRESSURE LEVEL
CONDENSER*
PACKING DIMENSION
HEIGHT
WIDTH
DEPTH
HEIGHT
WIDTH
230 / 506
REFRIGERANT CHARGE
AIR FLOW
DEPTH
UNIT WEIGHT
1430 / 56.3
1110 /43.7
68
3.9 / 8.6
UNIT DIMENSION
1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER WITHOUT PRIOR NOTICE.
2) ALL UNITS ARE BEING TESTED AND COMPLY TO ISO 13253.
3) NOMINAL COOLING AND HEATING CAPACITY ARE BASED ON THE CONDITIONS BELOW :
a) COOLING - 27°C DB / 19°C WB INDOOR AND 35°C DB / 24°C WB OUTDOOR
b) HEATING - 20°C DB INDOOR AND 7°C DB / 6°C WB OUTDOOR
4) SOUND PRESSURE LEVEL ARE ACCORDING TO JIS B 8615 STANDARD. POSITION OF THE MEASUREMENT POINT IS 1m IN FRONT AND 1m BELOW THE UNIT.
5) * DESIGNATION BASED ON COOLING CYCLE.
6) EFFECTIVE POWER INPUT IS USED IN THE RATED EER/COP CALCULATION, ACCORDING TO ISO STANDARD: ISO 13253
Btu/h
56000 80000
W
16410 23450
Btu/h
68000 78600
W
19930
23000
W
6220 9400
W
5970 7800
A
12.7 16.8
A
12.4 14.8
V/Ph/Hz
R22 / TXV R22 / CAPILLARY TUBE
W/W
2.64 1.73
W/W
3.34 2.98
AIR DISCHARGE
OPERATION
AIR FLOWl/s / cfm
850 / 1800 1334 / 2826
EXTERNAL STATIC PRESSURE Pa/in.wg.
mm/in
l/s / cfm
2124 / 4500 2667 / 5650
dBA
63 65
mm/in
mm/in
1100 / 43.3 1300 / 51.2
mm/in
mm/in
mm/in
1250 / 49.2
1450 / 57.1
mm/in
kg/lb
320 / 705
385 / 849
kg/lb
4.5 / 9.9 4.7 / 10.4
1680 / 66.1
25.4 / 1
1000 / 39.4
1530 / 60.2
1090 / 42.9
MRT060AR MRT080AR
380 ~ 415 / 3 / 50
98 / 0.39
DUCTED
SLM CONTROLLER
NOMINAL RUNNING CURRENT (HEATING)
POWER SOURCE
REFRIGERANT TYPE / CONTROL
EER
COP
MODEL
CONTROL
EVAPORATOR*
NOMINAL COOLING CAPACITY
NOMINAL HEATING CAPACITY
NOMINAL TOTAL INPUT POWER (COOLING)
NOMINAL TOTAL INPUT POWER (HEATING)
NOMINAL RUNNING CURRENT (COOLING)
CONDENSATE DRAIN SIZE
UNIT DIMENSION
SOUND PRESSURE LEVEL
CONDENSER*
PACKING DIMENSION
HEIGHT
WIDTH
DEPTH
HEIGHT
WIDTH
REFRIGERANT CHARGE
AIR FLOW
DEPTH
UNIT WEIGHT
1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER WITHOUT PRIOR NOTICE.
2) ALL UNITS ARE BEING TESTED AND COMPLY TO ISO 13253.
3) NOMINAL COOLING AND HEATING CAPACITY ARE BASED ON THE CONDITIONS BELOW :
a) COOLING - 27°C DB / 19°C WB INDOOR AND 35°C DB / 24°C WB OUTDOOR
b) HEATING - 20°C DB INDOOR AND 7°C DB / 6°C WB OUTDOOR
4) SOUND PRESSURE LEVEL ARE ACCORDING TO JIS B 8615 STANDARD. POSITION OF THE MEASUREMENT POINT IS 1m IN FRONT AND 1m BELOW THE UNIT.
5) * DESIGNATION BASED ON COOLING CYCLE.
6) EFFECTIVE POWER INPUT IS USED IN THE RATED EER/COP CALCULATION, ACCORDING TO ISO STANDARD: ISO 13253.