Specifications

Please ensure that the following steps are taken:

• Cheek the gradient for drainage flow as recommended in Figure B.

• Provide clearance for easy servicing and optimal air flow as shown in Figure B.

• The indoor unit must be installed such that there is no short circuit of the cool discharge air with the warm

return air.

• Do not install the indoor unit where there is direct sunlight shining on the unit. The location should be

suitable for piping and drainage installation. The unit must be a large distance away from the door.

Semi-Enclose Mounting

• In case the units is to be half recessed into false ceiling, please check the unit is well align.

Figure C

• Provide the installation space as shown in Fig. D.

Figure D