Specifications

2.2 Selecting Operation Mode

Press the MODE key to select the type of operating mode. Consecutive press of the key switches the

operation over “COOL”, “HEAT”, “AUTO” and “FAN”

2.3 SAVE Mode

Press the SAVE key to select the energy saving function. This option is only available for “COOL”, “HEAT”

and “AUTO” modes.

2.4 Auxiliary Electric Heater

If the “HEAT” mode provides insufficient heating to a room even at the highest temperature setting (30°C),

press the HEATER key to activate the auxiliary electric heater. For models with two heaters, consecutive

press of the key allows the selection of one or both heaters active.

2.5 Temperature Setting

To set the desired room temperature, press or to increase or decrease the set temperature

in the range of 16°C to 30°C.

Press both and simultaneously to toggle between °C and °F setting.

2.6 Time Setting

Real time Clock

Press the CLOCK key once to activate set clock mode.

Press again to disable set clock mode.

Under set clock mode, the time of the present day can be set by pressing the respective MINUTE, HOUR

and DAY key.

7days timer

Press the ON TIMER key to activate autoON timer mode. Under this mode, press the respective MINUTE,

HOUR and DAY key to select the time of the week when the air-conditioning unit is to automatically start

running. Press the ON TIMER key again to save the setting.

Press the OFF TIMER key to activate autoOFF timer mode. Under this mode, press the respective

MINUTE, HOUR and DAY key to select the time of the week when the air-conditioning unit is to automati-

cally stop running. Press the ON TIMER key again to save the setting.

Then to activate the 7days timer, press and hold the TIMER ACTIVE key until the word “TIMER ACTIVE”

appears on the LCD screen. Repeat the same step to disable the 7days timer.

2.7 Other Function

Key Lock

Press the MINUTE key 3 times consecutively to activate the key lock. A “KEY LOCK” symbol will appear

on the LCD screen. At this point, only the ON/OFF key is valid.

To disable the key lock, again press the MINUTE key 3 times consecutively.

Test run

Press the TEST key 2 times consecutively to test run the unit.