Specifications

Netware 2

Display

A : Fan Speed Display

• Displays the fan speed setting (Auto/High/Medium/Low)

B : Operation Mode Display

• Displays the current mode of operation.

C : Sleep Display

• Display the sleep / energy saving status.

D : Error Display

E : Swing Display

• Display the aur swing status.

F : Key Lock Display

• Display indicates when key lock function is activated.

G : °°C or °°F Display

• Display the temperature in °C or °F.

H : Current Time Start / Stop Time Display

• Display the current time as well as the start and stop time programmed.

I : On / Off Status Lamp Display

J : Set Temperature or Room Temperature Display

• Display the set or room temperature.

Other functions

• Last state memory using battery back up.

For 7-days programmable time option, battery back up is used to retain the last state data.

Units without battery back up will depend on the EEPROM on the main board.

• Error Indicator

Error code will be shown for any abnormal condition detected.

Refer to main board error codes for detail.