Catalog Air-Cooled Mini Chiller Models: MAC 020-150 C/CR M4AC 020-150 C/CR M5AC 020-055CR MAC-C-2009
Table of Contents Nomenclature ......................................................................................................................1 - Product Line up Features...............................................................................................................................5 Application Information........................................................................................................
Nomenclature M 4 AC 080 Nominal Cooling Capacity M R22 Equipment 4 R407C Equipment Brand Name (McQuay) Air Cooled Chiller C R _ Cooling R Heating Generation 1
Product Line Up MAC-C/CR AXAB x x x x x x x x AXAA x x x x x x x x AXAB x x x x x x x x AXAA x x x x x x x x AXAB x x x x x x x x FXAA x x x x x x x x FXAB x x x x x x x x FXAA x x x x x x x x FXAB x x x x x x x x FXAA x x x x x x x x FXAB x x x x x x x x FXAC x x x x x x x x FXAD x x x x x x x x FXAC x x x x x x x x FXAD x x x x x x x x FXAC x x x x x x x x FXAD
M4AC-C/CR x AXAA x x x x x x AXAB x x x x x x AXAA x x x x x x x x x x x x x x x x x x x x x x x x x x Single phase fan motor x x TXV x x Capillary Tube x CCH (crank case heater) x x Phase protector x Anti freeze & auto pump on AXAB x Pump only x Expansion tank x Water tank + pump x Gold fin x Terminal block CE mark x Isolator switch LCD Panel - Chiller Panel x Rotary compressor Magnetic contactor AXAA Scroll compressor PCB - MC01
LCD Panel - Chiller Panel CE mark Rotary compressor Terminal block Gold fin Water tank + pump Expansion tank AXAA x x x x x x x x x 025CR 030CR AXAA x x x x x x x x x EXAA x x x x x x x x 040CR EXAA x x x x x x x 050CR EXAA x x x x x x 055CR EXAA x x x x x x 4 x x x x x x x x x x x x x x x x x x x x x TXV Pump only Capillary Tube Magnetic contactor 020CR Anti freeze & auto pump on PCB - MC01 M5AC Nomenclature Model name M5AC-CR Classification
Features Refrigerant Circuit Models MAC/M4AC080~150C/CR has been designed with two separate refrigerant circuits, i.e. it has two compressors. By doing so, the unit has part loading capabilities, i.e. 0-50-100% of rated capacity. This will improve the reliability and energy efficiency of the unit, especially during low loading operations. Each circuit is factory brazed and evacuated before accurately charged with refrigerant to ensure optimum performance.
Antifreeze Protection The chiller unit has several anti-freeze protection features: 1. Brazed plate heat exchanger anti-freeze The BPHE has a strip heater around it to prevent water freezing inside 2. Auto mode The chiller controller will force on the unit to the heat mode if the outdoor ambient air temperature becomes too cold. Maintenance In order to facilitate of the controller, a rocker switch is provided to power-off the supply to the PCB.
Application Information Refrigerant Circuit Diagram M4AC / MAC 020C / 025C / 030C Water / Refrigerant Circuit Diagram FILTER IL ILTER DRIER CAP TUBE BPHE WATER A ATER OUT AUTO PRESS RELIEF VA V LV L E WATER A ATER IN COMPRESSOR WATER ATER PUMP A P EXPANSION P PANSION T TANK WATER ATER STORAGE A T TANK PART NO : 70-03-4-06746 M4AC / MAC 040C / 050C / 060C Water / Refrigerant Circuit Diagram FILTER IL ILTER DRIER CAP TUBE BPHE WATER A ATER OUT EXPANSION P PANSION T TANK AUTO PRESS RELIEF VA V LV
M4AC / MAC 020CR / 025CR / 030CR Water / Refrigerant Circuit Diagram CHECK VALV L E LV FILTER IL ILTER DRIER CHECK VALV L E LV COOLING CAP TUBE HEATING A ATING CAP TUBE BPHE WATER A ATER OUT CHARGE COMPENSAT A OR AT AUTO PRESS RELIEF VA V LV L E COMPRESSOR WATER A ATER IN SUCTION ACCUMULAT A OR AT P EXPANSION T TANK WATER ATER STORAGE A T TANK PART NO : 70-03-4-06745 M4AC / MAC 040CR / 050CR / 060CR Water / Refrigerant Circuit Diagram CHECK VA VE FILTER IL ILTER DRIER CHECK VALV L E LV BPHE
M4AC / MAC 080C / 100C / 120C / 150C Water / Refrigerant Circuit Diagram FIN TUBE HEA T EXCHANGER (SYSTEM 1) FIN TUBE HEA T EXCHANGER (SYSTEM 1) FIL TER DRIER FIL TER DRIER THERMOST ATIC EXP ANSION VA LV E COMPRESSOR THERMOST AT IC EXP ANSION VA LV E COMPRESSOR BRAZED PLA TE HEA T EXCHANGER WATER OUTLET WATER INLET M4AC / MAC 080CR / 100CR / 120CR / 150CR Water / Refrigerant Circuit Diagram FIN TUBE HEA T EXCHANGER (SYSTEM 2) FIN TUBE HEA T EXCHANGER (SYSTEM 1) 4-W AY V ALV E CHECK VA LV E HE
M5AC 020CR / 025CR Water / Refrigerant Circuit Diagram CHECK VALV L E LV CHECK VALV L E LV FILTER IL ILTER DRIER COOLING CAP TUBE HEATING A ATING CAP TUBE BPHE WATER A ATER OUT CHARGE COMPENSAT A OR AT AUTO AIR VENT SUCTION ACCUMULAT A OR AT COMPRESSOR WATER A ATER IN P EXPANSION P PANSION T TANK WATER ATER PUMP A WA WA ATER TER STORAGE T TANK PART NO : 70-03-4-08054 WATER / REFRIGERANT M5AC 030CR Water / Refrigerant Circuit Diagram 4WV BPHE TWIN T UBE JOINT WATER O UT WA FILTER L DRIER
M5AC 040 / 050CR Water / Refrigerant Circuit Diagram W 4WV BPHE TWIN TUBE JOINT ACCUMULAT A OR FILTER L DRIER CHECKK VALVE O IL RETURN TUBE WA W ATER O UT EXPANSION P TTANK OIL RETURN TUBE WA W ATER IN PUMP COMPRESSOR 1 COMPRESSOR 2 TXV LIQUID RECEIVER M5AC 055CR Water / Refrigerant Circuit Diagram WATER / REFRI 4WV BPHE SUB ACCUMULAT A OR TWIN TUBE JOINT WA W ATER OUT FILTER L DRIER OIL RETURN TUBE CHECKK VALVE EXPANSION P T TANK OIL RETURN TUBE WATER WA IN PUMP COMPRESSOR 2 COMPRES
Chiller Panel Controller 1. Safety Consideration Only specially trained and technicians and installers are authorized to install and service this equipment.. 1.1 General Installation Recommendations • Only supply DC voltage (9-17V, typically 12V, maximum current 200mA) as a power source to the device. • Input contact voltage supply should limit to 12VDC or 24VAC. • Isolated all the low voltage wiring (communication bus, etc) from high voltage power supply wiring. 2. General Description 2.
3. Hardware Description Legend 1&2 3 4 5 6 7 8 9 10 Navigation key Execute instruction key Cancel instruction key Switching to heat mode shortcut key Switching to cool mode shortcut key Toggle ON/OFF shortcut key Show alarm key Graphical LCD display ON/OFF indicator Legend 1&2 3 4 5 6 7 8 9 10 Chiller terminal unit connection Not available CMOS rset jumper (JH2) Chiller bus resist or configuration (JH3) Not available Not available Not available Not available Backup battery 3.
4. Installation 4.1 Chiller Bus Supported up to 50 units of Chiller Chiller 0 Chiller Panel 0 (Master) Chiller 1 Chiller 2 5 way wire (CM8) Chiller Communication bus Chiller Panel 1 (Slave) Chiller Network Chiller panel needs to be energized with +12Vdc. The 5 way wires that provided is once on the easiest solution to establish a communication between the panel and chiller main board (CN8-CN8).
4.2 Others Configuration • • • JH2 in chiller panel should let it open (put the jumper header on one pin only) all the time unless user need to do CMOS reset to that particular panel. JH3 should let it open (put the jumper header on one pin only) all the time as well. Remember to put in the coin cell battery on the panel. Without the backup battery, the panel will always reset the time to 12:00am, 1st Jan 2000. 4.
5. Software Description 5.1 Introduction The Chiller Panel Controller can be used to control / display the status of Chiller.
5.
5.3 Chiller Menu Structure 5.31 Summary Pages There are 4 pages in [Summary Pages]. Press UP or DOWN for page scrolling. Press ENTER to go to [Main Menu]. Time and date are shown on top of each page. Beside that, the bottom of each page shows current control unit of the Chiller.
5.3.2 Main Menu Press ENTER in [Summary Pages] to go into this menu MAIN MENU Operating Menu Setting Menu Timer Menu Alarm Menu Display Menu There are 5 sub menus in [Main Menu]. Press UP or DOWN to select sub menus, ENTER to enter into the sub menu or press ESC to exit to [Summary Pages] 5.3.2.1 Operation Menu Select [Operation Menu] in [Main Menu] and press ENTER to go into this menu. OPERATION MENU Status : ON Mode : Cooling Cool Temperature : 12.0° C Heat Temperature : 40.
5.3.2.2 Settings Menu Select [Settings Menu] in [Main Menu] and press ENTER to go into this menu. SETTINGS MENU Set Parameter Change Passw ord Panel Option Set Panel ID Some advance settings can be found here. Press UP or DOWN to select settings, ENTER to start the setting or press ESC here to exit to [Main Menu]. Settings - Set Parameter - Password Changing - Panel Option - Set Panel ID 5.3.2.2.1 Set Parameter Select [Set Parameter] in [Settings Menu] and press ENTER to go into this menu. 1.General 2.
5.3.2.2.3 Panel Option Select [Panel Option] in [Setting Menu] and Press ENTER to go into this menu. Backlight Buzzer Screen Saver Timeout Contrast Brightness Temp Unit : Norm al : : On : Disable : 5m : 50% : Medium :°C User can do some miscellaneous for the panel. These settings would not affect whole system performance.
5.3.2.3 Time Menu Select [Time Menu] in [Main Menu] and press ENTER to go into this menu. TIMER MENU Clock Setting Date Setting Time Schedule Timer : Disable : All the timer/ schedule settings are included in this menu. Press UP or DOWN to select each settings. ENTER to start the setting or press ESC here to exit to [Main Menu]. Settings: - Set Clock - Set Date - Set Schedule ( 7 days Programmable Timer) - Enable/ Disable Timer Schedule 5.3.2.3.
5.3.2.3.2 Set Date Select [Date Setting] in [Timer Menu] and press ENTER to go into this menu. Set Time : yyyy hh mm 2000 /01 / 01 User can set the date in this menu. The date is set according to sequence below: (year) / (month) / (day) Press [ESC] to exit to [Timer Menu]. 5.3.2.3.3 Set Schedule Select [Schedule Timer] in [Timer Menu] and press ENTER to go into this menu.
5.3.2.4.1 Show Alarms Select [Show Alarms] in [Alarm Menu] and press ENTER to go into this menu. [Ch 0] Alarm 1 Comp 1 overload 01/ 01/ 00 12:00am User can view all the fault/ alarm records in this menu. The record shows - Alarm type - Alarm occurred date - Alarm occurred time - Alarm occurred unit (Chiller ID) Beside that, user can erase the alarm record in this menu. Press [ESC] to exit to [Alarm Menu]. 5.3.2.4.
5.3.2.5.1 Defrost Sensor Select [Defrost Sensor] in [Display Menu] and press ENTER to go into this menu. Defrost Sensor Comp 1 : 12.8° C User can view the defrost sensor temperature for each compressor in the Chiller. Press [ESC] to exit to [Display Menu] 5.3.2.5.2 Discharge Sensor Select [Discharge Sensor] in [Display Menu] and press ENTER to go into this menu. Discharges Sensor Comp 1 : 36.5° C User can view the discharge sensor temperature for each compressor in the Chiller.
6. Operation User Manual 6.1 Starting Chiller panel can be set as Master or Slave panel unit. When the Panel ID is set to ‘0’, it acts like a Master panel, whereas it is Slave panel if Panel ID is set to others number (1-50). Chiller panel can control the Chiller if both ID no. (Panel ID and Chiller ID) are same. For example: Panel ID 1 can only control Chiller ID 1 Master Panel can choose to control each Chiller or control all Chiller at once in the network.
6.2 Chiller Operation Control 6.2.1 Starting During power on for the Chiller Panel, it needs to take several times to collect information from the Chiller. At this time, all the status will show “--”. Please ensure the particular Chiller exists in the network. When the process is completed, user can start to control the Chiller using the panel.
6.2.3 Switching ON/OFF There are several ways to switch ON/OFF for the Chiller. i) [Summary Pages] Press and hold ON/OFF button (hold 1 second). Please note that the ON/OFF button will only function in [Summary Pages]. ii) [Operation Menu] Summary Pages Main Menu Operation Menu OPERATION MENU Status : ON Mode : Cooling Cool Temperature : 12.0° C Heat Temperature : 40.0° C OPERATION MENU Status : ON Mode : Cooling Cool Temperature : 12.0° C Heat Temperature : 40.
6.2.4 Switching Mode There are several ways to switch the mode for the Chiller. Please take note that some mode cannot be set due to current Chiller model settings. Chiller Model Chiller Heat Pump Chiller / Boiler Heat Pump /Boiler Chiller + Boiler Heat Pump + Boiler Cooling √ √ √ √ √ √ Mode Heating × √ × √ × √ Boiling × × √ √ Auto Auto √ × Auto - Allow to set - Not Allow to set - Turn ON automatically i) [Summary Pages] Cooling - Press and hold COOL button.
6.2.5 Changing Mode Set Temperature There are 2 ways to change the mode set temperature for the Chiller. i) [Operation Menu] OPERATION MENU Status : ON Mode : Cooling Cool Temperature : 12.0°C Heat Temperature : 40.0°C OPERATION MENU Status : ON Mode : Cooling Cool Temperature : 12.0°C Heat Temperature : 40.0°C In [Operation Menu], select “Cool Temp” / “Heat Temp”and press ENTER start setting or ESC to exit to [Main Menu].
6.2.6 Manual Defrost User can choose which compressor will go into manual defrost cycle by using the Chiller Panel, as long as the condition is fulfilled with defrost condition. This can be done in [Operation Menu]. Summary Pages Main Menu Operation Menu Please take note that “Manual Defrost” option will only available in HEATING mode. It will disappear in COOLING/ BOILING mode. OPERATION MENU Status : ON Mode : Cooling Cool Temperature : 12.0° C Heat Temperature : 40.
6.2.7 Advance Parameter Settings The Chiller Panel provide user a lot of advance parameter settings for the Chiller. The parameters are divided into 7 groups. There all are stored in [Set Parameter] menu and it is password-procteted layer in the panel. * CAUTION : INPROPER SETTINGS WILL CAUSE PERMANENT DAMAGE TO THE CHILLER !!! Summary Pages Main Menu Settings Menu Key in Password Set Parameter 7 groups of Advance Parameter: 1) General G1 Model G2 No.
4) Compressor C1 Min Run C2 Min Stop C3 2On Interval C4 2Cp ON Dly C5 P-Cp ON Dly C6 Cp-P OFF Dly C7 Cp Cut Off : 12s : 240s : 360s : 15s : 60s : 60s : 120° C 5) Condenser Defrost D1 Start Temp D2 End Temp D3 Max Dura D4 Interval D5 Dly Bfr Def D6 Dly Aft Def : -3° C : 14° C : 10m : 45m : 0s : 0s 6) Cool Mode Antifreeze A1 Heater SP A2 Heater Diff A3 Sensor A4 Alarm SP A5 Alarm Diff : 5° C : 2.0° C : Leave : 3° C : 2.
6.2.8 Changing Password For security purpose, some places in the panel are password-proctected. User can change the password at anytime. Summary Pages Main Menu Settings Menu Change Password Please enter the Old password ----------0 ---- User needs to enter the old password in order to change the password. Change the 1st digit value via UP or DOWN. Press ENTER to start enter 2nd digit and the rest, or ESC to exit at anytime. Password accepted . . .
6.2.9 Clock Setting User can set the clock for the panel. Summary Pages Main Menu Timer Menu Set Time Set Time : UP or DOWN to change ‘hour’. ENTER to set ‘minute’ or ESC to exit to [Timer Menu]. hh mm UP or DOWN to change ‘minute’. ENTER to confirm or ESC to set ‘hour’again. 00 : 00 6.4.10 Date Setting User can set the date for the panel.
6.2.11 7 days Programmable Setting The are 2 ON/OFF events in one day for the schedule. This schedule is applicable to all the chillers in the network. Sun Mon Tue Wed Sun Mon Tue Wed Timer 1 ON OFF Timer 2 ON OFF 0800 1600 0800 1600 0800 1600 0800 1600 ____ ____ ____ ____ Timer 1 ON OFF Timer 2 ON OFF UP or DOWN select event. ENTER to start setting or ESC to back to select day of week. 0800 1600 0800 1600 0800 1600 0800 1600 ____ ____ ____ ____ Event setting is same like time setting.
6.2.12 Viewing Alarm / Erase Alarm Record Whenever a new fault/ alarm is occurred, there will be a message pop up to show the fault/ alarm. Backlight will blinking with beeping sound (if “Alarm Buzzer” is set ON). If the fault/ alarm has not been dissolved from the Chiller, a sign [A] will be shown in the [Summary Pages].(from pop up menu) automatically if the fault/ alarms have been dissolved.
6.2.13 Viewing Defrost Sensor Temperature The Chiller Panel displays defrost sensor temperature for each compressor in [Defrost Sensor] in [Display Menu]. Defrost Sensor Press ESC to exit to [Display Menu] Comp 1 : 12.8° C 6.2.14 Viewing Compressor Discharge Temperature The Chiller Panel displays compressor discharge temperature for each compressor in [Discharge Sensor] in [Display Menu]. Discharge Sensor Comp 1 : 36.
6.2.15 Viewing/ Clear Compressor Run Time User can view/ clear the compressor run time for the Chiller in [Comp Run Time] in [Display Menu]. Press UP or DOWN to select teh compressor. ENTER to start clear the run time, or ESC to exit to [Display Menu]. Comp Run Time Comp 1 : 13579h Clear Run Time ? Press ENTER and key in the password to confirm or ESC to cancel Press Enter to Clear Or ESC to exit. 6.2.16 Miscellaneous Settings User can do some miscellaneous settings to the panel.
Parameter Value Description Backlight Normal Always ON OFF Enable Disable 1-30m 0-100% OFF Low, Medium, High °C °F Turn ON backlight for 30s via key press Always ON backlight Enable beeping sound when fault/ alarm occurred Disable beeping sound when fault/ alarm occurred Show screen saver when timeout No screen save Timeout for showing screen saver Adjust the contrast setting for the LCD panel No backlight Adjust the backlight intensity Display temperature in degree Celsius Display temperature in degre
7.
8.
A1 A2 A3 A4 A5 P1 P2 P3 P4 P5 P6 P7 P8 P9 P10 P11 P12 P13 P14 P15 P16 P17 P18 P19 COOL MODE ANTIFREEZE Antifreeze heater set-point Antifreeze heater differential Antifreeze sensor select 0=Leaving water, 1=Entering water Antifreeze alarm set-point Antifreeze alarm differential Unit °C (F) °C (F) Flag ALARM AND CONTACT Flow switch confirmation time Flow switch alarm delay at pump start Low pressure alarm delay at compressor start up Comp overload alarm reset type 0=Manual reset, 1=Auto reset High pressur
Precautions and Installation Special Precautions When Dealing With Refrigerant R407C Unit 1) What is new refrigerant R407C? R407C is a zeotropic refrigerant mixture which has Zero Ozone Depletion Potential (ODP = 0) and thus conformed to the Montreal Protocol regulation. It requires Polyol-ester oil (POE) oil for its compressor’s lubricant. Its refrigerant capacity and performance are about the same as the refrigerant R22.
c) Ensure that the compressor is not expose to open air for more than the recommended time specified by its manufacturer (typically less than 10 minutes). Removed the seal plugs only when the compressor is about to be brazed. d) The system should be thoroughly vacuumed to 1.0 Pa ( 700mmHg) or lower. This vacuuming level is more stringent than R22 system so as to ensure no incompressible gas and moisture in the system.
Special Precautions When Dealing With Refrigerant R410A Unit 1) What Is New Refrigerant R410A? R410A is a new HFC refrigerant which does not damage the ozone layer. The working pressure of this new refrigerant is 1.6 times higher than conventional refrigerant (R22), thus proper installation / servicing is essential. 2) Components Mixture of composition by weight : R32(50%) and R125(50%) 3) Characteristic • R410A liquid and vapor components have different compositions when the fluid evaporates or condenses.
d) When charging R410A, ensure that only liquid is being withdrawn from the cylinder or can. This is to ensure that only the original composition of R410A is being delivered into the system. The liquid composition can be different from the vapor composition. Dip-pipe Invert cylinder without dip-pipe Liquid withdrawal e) Normally, the R410A cylinder or can is being equipped with a dip-pipe for liquid withdrawal.
Installations M4AC/ MAC 020/ 025/ 030 C/CR, M5AC 020 / 025 / 030CR M4AC/ MAC 040/ 050/ 060 C/CR, M5AC 040 / 050 / 055 CR 48
M4AC/ MAC 080/ 100/ 120/ 150 C/CR 500 MIN 500 M4AC / MAC 020 / 025 / 030 / 040 / 050 / 060C/CR, M5AC 020 / 025 / 030 / 040 / 050 / 055CR 500 1500 AIR FLOW AIR FLOW AIR FLOW For single unit installation 49 500
M4AC / MAC 020 / 025 / 030 / 040 / 050 / 060 C/CR, M5AC 020 / 025 / 030 / 040 / 050 / 055 CR 500 1000 500 AIR FLOW AIR FLOW 1500 AIR FLOW 1000 AIR FLOW AIR FLOW AIR FLOW AIR FLOW MIN 500 For multiple unit installation (mm) 50 100 50 For floor installation (mm) Safety Precautions Before installing the air conditioner unit, please read the following safety precautions carefully ! • • • • • • • Warning Installation and maintenance should be performed by qualified persons who are familiar
! Caution Please take note of the following important points when installing. • Do not install the unit where leakage of flammable gas may occur. If gas leaks and accumulates around the unit, it may cause fire ignition. • Ensure that the drainage piping is connected properly. ! • If the drainage piping is not connected properly, it may cause water leakage which will dampen the furniture. Do not overcharge the unit. This unit is factory pre-charged.
M4AC / MAC / 020 / 025 / 030 C/CR, M5AC 020 / 025 / 030 CR AIRVENT (INSTALL T HIGHEST POSITION) PRESSURE GAUGE GATE A VALVE GATE A VALVE GATE A BALANCING VALVE VALVE THERMOMETER FAN COIL L UNIT/AIR HANDLING UNIT THERMOMETER GATE A E VALV L E VALVE GATE A VALV L E P BYP P (DIFFER ENT ALV L E STRAINER FLEXIBLE GATE A VAL LVE (LOWER POSITION FOR DRAINAGE) CHECK VALVE MAKE UP VALVE M4AC / MAC / 040 / 050 / 060 C/CR, M5AC 040 / 050 / 055 CR AIRVENT (INSTALL T HIGHEST POSITION) PRESSURE GAUGE G
Electrical And Wiring • Refer to the wiring diagram provided on the unit when making electrical wiring. • Install an isolator (optional) to prevent electrical shock. • Do not ground any electrical equipment to the water piping. • Operation of the mini chiller without any fan speed controller (Field supply) is limited to an ambient temperature of 20C. With the fan speed controller (Field supply), the unit is able to operate down to -5C.
5HFRPPHQGHG IXVH DQG FDEOH VL]HV 0RGHO 0 $& & &5 0$& & &5 9ROWDJH UDQJH 0 $& & &5 0$& & &5 0 $& & &5 0$& & &5 0 $& & &5 0$& & &5 9 3K +] 1 0 $& & &5 0$& & &5 0 $& & &5 0$& & &5 9 3K +] 1 5HFRPPHQGHG IXVH $ 3RZHU VXSSO\ FDEOH VL]H PP 1XPEHUV RI FRQGXFWRU ,QWHUFRQQHFWLRQ FDEOH VL]H PP 0RGHO 0 $& & &5 0$& & &5 0 $& & &5 0$& &
! WARNING • All terminals and connection must be tightened. • Avoid any wires from touching the refrigerant pipe. Apply insulation if necessary. • Avoid any wires from touching the moving components such as, fan motor, pump & compressor. Water Piping System Setup • Fill up the water circuit after connecing all the pipes and equipment. Perform leak checks for all connections and joints. Do not start the unit when the system is leaking.
Control Operation Guide The unit is equipped with a microprocessor controller board. The microprocessor contorller is provided to give temperature control for the system by accurately measuring the ambient temperature, and controlling the water entering and water leaving temperature. The temperature setting in teh unit is preset in the factory. It is not recommended to chage the setting unless necessary. A wired contoller handset is connected to the microprocessor board.
Sound Data MAC/M4AC020C/CR, M5AC020CR NC CURVE Sound Pressure level (dB, ref 20µPa) 80 70 60 NC-60 NC-55 50 NC-50 NC-45 40 NC-40 NC-35 30 NC-30 20 10 0 125 250 500 1000 2000 4000 8000 Octave-band frequency (Hz) MAC/M4AC025C/CR, M5AC025CR NC CURVE 80 Sound Pressure level (dB, ref 20µPa) 70 60 NC-60 NC-55 50 NC-50 NC-45 40 NC-40 NC-35 30 NC-30 20 10 0 125 250 500 1000 2000 Octave-band frequency (Hz) 57 4000 8000
MAC/M4AC030C/CR NC CURVE Sound Pressure level (dB, ref 20µPa) 80 70 60 NC-60 50 NC-50 NC-55 NC-45 40 NC-40 30 NC-30 NC-35 20 10 0 125 250 500 1000 2000 4000 8000 Octave-band frequency (Hz) MAC/M4AC040C/CR NC CURVE 80 Sound Pressure level (dB, ref 20µPa) 70 60 NC-60 NC-55 50 NC-50 40 NC-45 NC-40 NC-35 30 NC-30 20 10 0 125 250 500 1000 2000 Octave-band frequency (Hz) 58 4000 8000
MAC/M4AC050C/CR NC CURVE 70 60 NC-60 NC-55 50 NC-50 40 NC-45 NC-40 NC-35 30 NC-30 20 10 0 125 250 500 1000 2000 4000 8000 Octave-band frequency (Hz) MAC/M4AC060C/CR NC CURVE 80 70 Sound Pressure level (dB, ref 20µPa) Sound Pressure level (dB, ref 20µPa) 80 60 NC-60 NC-55 50 NC-50 NC-45 NC-45 40 NC-40 NC-35 NC-35 30 NC-30 20 10 0 125 250 500 1000 2000 Octave-band frequency (Hz) 59 4000 8000
MAC/M4AC080C/CR NC CURVE Sound Pressure level (dB, ref 20µPa) 90 80 70 NC-70 NC-65 60 NC-60 NC-55 50 NC-50 NC-45 40 NC-40 30 20 10 0 125 250 500 1000 2000 4000 8000 Octave-band frequency (Hz) MAC/M4AC 100C/CR NC CURVE 90 Sound Pressure level (dB, ref 20µPa) 80 NC-70 70 NC-65 60 NC-60 NC-55 50 NC-50 NC-45 40 NC-40 30 20 10 0 125 250 500 1000 2000 Octave-band frequency (Hz) 60 4000 8000
MAC/M4AC 120C/CR NC CURVE Sound Pressure level (dB, ref 20µPa) 90 80 NC-70 70 NC-65 60 NC-60 NC-55 50 NC-50 NC-45 40 NC-40 30 20 10 0 125 250 500 1000 2000 4000 8000 Octave-band frequency (Hz) MAC/M4AC 150C/CR NC CURVE Sound Pressure level (dB, ref 20µPa) 90 80 NC-70 70 NC-65 60 NC-60 NC-55 50 NC-50 NC-45 40 NC-40 30 20 10 0 125 250 500 1000 2000 Octave-band frequency (Hz) 61 4000 8000
M5AC030C/CR NC CURVE 80 Sound pressure level (dB, ref 20µPa) 70 60 NC-60 NC-55 50 NC-50 NC-45 40 NC-40 NC-35 30 NC-30 20 10 0 125 250 500 1000 2000 4000 8000 Octave-band frequency (Hz) M5AC040C/CR NC CURVE Sound pressure level (dB, ref 20µPa) 80 70 NC-60 60 NC-55 50 NC-50 NC-45 40 NC-40 NC-35 30 NC-30 20 10 0 125 250 500 1000 2000 Octave-band frequency (Hz) 62 4000 8000
M5AC050C/CR NC CURVE 80 Sound pressure level (dB, ref 20µPa) 70 NC-60 60 NC-55 50 NC-50 NC-45 40 NC-40 NC-35 30 NC-30 20 10 0 125 250 500 1000 2000 4000 8000 Octave-band frequency (Hz) M5AC055C/CR NC CURVE 80 Sound pressure level (dB, ref 20µPa) 70 60 NC-60 NC-55 50 NC-50 NC-45 40 NC-40 NC-35 30 NC-30 20 10 0 125 250 500 1000 2000 Octave-band frequency (Hz) 63 4000 8000
Selection Process Water Pressure Drop vs Flow Rate Model : MAC/M4AC020C/CR Water Flow m3/hr 0.6 0.8 1.0 1.2 1.4 Pump Head kPa System Head kPa 117.0 115.0 114.0 112.0 108.0 12.0 25.0 34.0 50.0 59.9 Available Head Presure kPa 105.0 90.0 80.0 62.0 48.1 Model : MAC/M4AC025C/CR Water Flow m3/hr 0.7 0.8 1.0 1.3 1.5 1.8 Pump Head kPa System Head kPa 116.0 116.0 114.0 110.0 105.0 100.0 10.4 10.8 15.2 20.9 27.9 35.2 Available Head Presure kPa 105.6 105.2 98.8 89.1 77.1 64.
Model : MAC/M4AC060C/CR, M5AC055CR Water Flow m3/hr 1.8 2.4 3.0 3.2 Pump Head kPa System Head kPa 150.0 137.0 107.0 69.0 10.5 22.8 39.0 41.8 Available Head Presure kPa 139.5 114.2 68.0 27.2 Model : MAC/M4AC080C/CR Water Flow m3/hr 2.4 3.2 4.0 4.8 5.6 6.4 Pump Head kPa System Head kPa 300.0 270.0 260.0 230.0 200.0 175.0 18.7 32.6 49.3 69.6 93.5 121.0 Available Head Presure kPa 281.3 237.4 210.7 160.4 106.5 54.0 Model : MAC/M4AC100C/CR Water Flow m3/hr 3.0 4.0 5.0 6.0 7.
Correction Factors With Glycol Use LWT/ deg C -5 -3.9 -1.1 1.7 4.4 7.2 10 10 0.925 0.945 0.956 0.965 0.962 GYLCOL % WATER FLOW 10 20 30 40 1.015 1.04 1.08 1.135 CAPACITY FACTOR GLYCOL 20 30 0.89 0.87 0.9 0.876 0.925 0.892 0.938 0.906 0.949 0.918 0.959 0.927 0.957 0.926 PRESSURE DROP 1.06 1.12 1.18 1.24 66 40 0.77 0.781 0.796 0.809 0.82 0.829 0.
Engineering and Physical Data General Data - R22 Cooling only MODEL NOMINAL COOLING CAPACITY NOMINAL TOTAL INPUT POWER NOMINAL RUNNING CURRENT POWER SOURCE MAC020C MAC025C Btu/h 18000 23500 W 5275 6887 W 2669 2730 A 12.6 R22 REFRIGERANT TYPE CONTROL UNIT DIMENSION PACKING DIMENSION 12.6 220-240 / 1 / 50 V/Ph/Hz CAPILLARY TUBE HEIGHT mm/in 800 / 31.5 WIDTH mm/in 1160 / 45.7 DEPTH mm/in 460 / 18.1 HEIGHT mm/in 958 / 37.7 WIDTH mm/in 1309 / 51.5 DEPTH mm/in 574 / 22.
General Data - R22 Cooling only MODEL MAC030C MAC040C Btu/h 27500 40000 W 8059 11723 NOMINAL TOTAL INPUT POWER W 3491 4470 NOMINAL RUNNING CURRENT A 16.6 8.8 V/Ph/Hz 220-240 / 1 / 50 380-415 / 3 / 50 NOMINAL COOLING CAPACITY POWER SOURCE R22 REFRIGERANT TYPE CONTROL UNIT DIMENSION CAPILLARY TUBE HEIGHT mm/in 800 / 31.5 1410 / 55.5 WIDTH mm/in 1160 / 45.7 1160 / 45.7 DEPTH mm/in 460 / 18.1 460 / 18.1 HEIGHT mm/in 958 / 37.7 1578 / 62.1 WIDTH mm/in 1309 / 51.
General Data - R22 Cooling only MODEL MAC050C MAC060C Btu/h 50000 53000 W 14654 15533 NOMINAL TOTAL INPUT POWER W 5245 6361 NOMINAL RUNNING CURRENT A 9.3 NOMINAL COOLING CAPACITY POWER SOURCE R22 REFRIGERANT TYPE CAPILLARY TUBE CONTROL UNIT DIMENSION PACKING DIMENSION 12.3 380-415 / 3 / 50 V/Ph/Hz HEIGHT mm/in 1410 / 55.5 WIDTH mm/in 1160 / 45.7 DEPTH mm/in 460 / 18.1 HEIGHT mm/in 1578 / 62.1 WIDTH mm/in 1309 / 51.5 DEPTH mm/in 574 / 22.
General Data - R22 Cooling only MODEL MAC080C MAC100C Btu/h 78000 93000 W 22860 27257 NOMINAL TOTAL INPUT POWER W 8667 10175 NOMINAL RUNNING CURRENT A 16.3 NOMINAL COOLING CAPACITY POWER SOURCE 17.0 380-415 / 3 / 50 V/Ph/Hz REFRIGERANT TYPE R22 CONTROL TXV UNIT DIMENSION PACKING DIMENSION HEIGHT mm/in 1245 / 49.0 WIDTH mm/in 1500 / 59.1 DEPTH mm/in 900 / 35.4 HEIGHT mm/in 1452 / 57.2 WIDTH mm/in 1732 / 68.2 DEPTH mm/in 1032 / 40.
General Data - R22 Cooling only MODEL MAC120C MAC150C Btu/h 116000 138000 W 33998 40445 NOMINAL TOTAL INPUT POWER W 11005 13779 NOMINAL RUNNING CURRENT A 22.9 NOMINAL COOLING CAPACITY POWER SOURCE 26.7 380-415 / 3 / 50 V/Ph/Hz REFRIGERANT TYPE R22 CONTROL TXV UNIT DIMENSION PACKING DIMENSION HEIGHT mm/in 1245 / 49.0 WIDTH mm/in 1800 / 70.9 DEPTH mm/in 1150 / 45.3 HEIGHT mm/in 1452 / 57.2 WIDTH mm/in 2032 / 80.0 DEPTH mm/in 1282 / 50.
General Data - R22 Heat pump MODEL NOMINAL COOLING CAPACITY NOMINAL HEATING CAPACITY NOMINAL TOTAL INPUT POWER NOMINAL RUNNING CURRENT MAC020CR MAC025CR Btu/h 18000 23000 W 5275 6740 Btu/h 22000 25000 W 6448 7327 COOLING W 2599 2779 HEATING W 2770 2614 COOLING A 12.3 12.7 HEATING A 12.7 POWER SOURCE 12.0 220-240 / 1 / 50 V/Ph/Hz R22 REFRIGERANT TYPE CAPILLARY TUBE CONTROL UNIT DIMENSION PACKING DIMENSION HEIGHT mm/in 800 / 31.5 WIDTH mm/in 1160 / 45.
General Data - R22 Heat pump MODEL MAC030CR MAC040CR Btu/h 27500 40000 W 8060 11723 Btu/h 31500 43000 W 9232 12602 COOLING W 3541 4560 HEATING W 3561 4629 COOLING A 18.3 8.6 HEATING A 18.4 8.8 V/Ph/Hz 220-240 / 1 / 50 NOMINAL COOLING CAPACITY NOMINAL HEATING CAPACITY NOMINAL TOTAL INPUT POWER NOMINAL RUNNING CURRENT POWER SOURCE 380-415 / 3 / 50 REFRIGERANT TYPE R22 CONTROL UNIT DIMENSION PACKING DIMENSION CAPILLARY TUBE HEIGHT mm/in 800 / 31.5 1410 / 55.
General Data - R22 Heat pump MODEL MAC050CR MAC060CR Btu/h 46000 53000 W 13481 15533 Btu/h 52000 59000 W 15240 17292 COOLING W 5046 6551 HEATING W 4999 6247 COOLING A 8.9 13.4 HEATING A 8.9 NOMINAL COOLING CAPACITY NOMINAL HEATING CAPACITY NOMINAL TOTAL INPUT POWER NOMINAL RUNNING CURRENT POWER SOURCE 13.0 380-415 / 3 / 50 V/Ph/Hz R22 REFRIGERANT TYPE CONTROL UNIT DIMENSION PACKING DIMENSION CAPILLARY TUBE HEIGHT mm/in 1410 / 55.5 WIDTH mm/in 1160 / 45.
General Data - R22 Heat pump MODEL NOMINAL COOLING CAPACITY NOMINAL HEATING CAPACITY NOMINAL TOTAL INPUT POWER NOMINAL RUNNING CURRENT MAC080CR MAC100CR Btu/h 77000 94000 W 22567 27549 Btu/h 90000 110000 W 26376 32239 COOLING W 9577 11255 HEATING W 9329 10759 COOLING A 16.3 18.3 HEATING A 15.7 POWER SOURCE 17.4 380-415 / 3 / 50 V/Ph/Hz R22 REFRIGERANT TYPE CONTROL UNIT DIMENSION PACKING DIMENSION CAPILLARY TUBE HEIGHT mm/in 1245 / 49.0 WIDTH mm/in 1500 / 59.
General Data - R22 Heat pump MODEL NOMINAL COOLING CAPACITY NOMINAL HEATING CAPACITY NOMINAL TOTAL INPUT POWER NOMINAL RUNNING CURRENT MAC120CR MAC150CR Btu/h 113000 138000 W 33118 40445 Btu/h 120000 132000 W 35169 38686 COOLING W 11714 13881 HEATING W 11948 14572 COOLING A 23.7 26.3 HEATING A 23.8 POWER SOURCE 27.3 380-415 / 3 / 50 V/Ph/Hz R22 REFRIGERANT TYPE CONTROL CAPILLARY TUBE UNIT DIMENSION PACKING DIMENSION HEIGHT mm/in WIDTH mm/in 1800 / 70.
General Data - R407C Cooling only MODEL Btu/h NOMINAL COOLING CAPACITY NOMINAL TOTAL INPUT POWER NOMINAL RUNNING CURRENT POWER SOURCE M4AC020C M4AC025C 21000 23000 W 6154 6740 W 2617 2949 A 12.5 R407C REFRIGERANT TYPE CAPILLARY TUBE CONTROL UNIT DIMENSION PACKING DIMENSION 13.6 220-240 / 1 / 50 V/Ph/Hz HEIGHT mm/in 800 / 31.5 WIDTH mm/in 1160 / 45.7 DEPTH mm/in 460 / 18.1 HEIGHT mm/in 958 / 37.7 WIDTH mm/in 1309 / 51.5 DEPTH mm/in 574 / 22.
General Data - R407C Cooling only MODEL M4AC030C M4AC040C Btu/h 27000 40000 W 7912 11723 NOMINAL TOTAL INPUT POWER W 3679 4910 NOMINAL RUNNING CURRENT A 17.4 9.3 V/Ph/Hz 220-240 / 1 / 50 380-415 / 3 / 50 NOMINAL COOLING CAPACITY POWER SOURCE R407C REFRIGERANT TYPE CONTROL UNIT DIMENSION CAPILLARY TUBE HEIGHT mm/in 800 / 31.5 1410 / 55.5 WIDTH mm/in 1160 / 45.7 1160 / 45.7 DEPTH mm/in 460 / 18.1 460 / 18.1 HEIGHT mm/in 958 / 37.7 1578 / 62.1 WIDTH mm/in 1309 / 51.
General Data - R407C Cooling only MODEL M4AC050C M4AC060C Btu/h 50000 52000 W 14654 15240 NOMINAL TOTAL INPUT POWER W 5955 6859 NOMINAL RUNNING CURRENT A 10.2 NOMINAL COOLING CAPACITY POWER SOURCE R407C REFRIGERANT TYPE CAPILLARY TUBE CONTROL UNIT DIMENSION PACKING DIMENSION 12.9 380-415 / 3 / 50 V/Ph/Hz HEIGHT mm/in 1410 / 55.5 WIDTH mm/in 1160 / 45.7 DEPTH mm/in 460 / 18.1 HEIGHT mm/in 1578 / 62.1 WIDTH mm/in 1309 / 51.5 DEPTH mm/in 574 / 22.
General Data - R407C Cooling only MODEL M4AC080C M4AC100C Btu/h 74000 88000 W 21688 25791 NOMINAL TOTAL INPUT POWER W 9463 10771 NOMINAL RUNNING CURRENT A 17.3 NOMINAL COOLING CAPACITY POWER SOURCE 18.0 380-415 / 3 / 50 V/Ph/Hz R407C REFRIGERANT TYPE TXV CONTROL UNIT DIMENSION PACKING DIMENSION HEIGHT mm/in 1245 / 49.0 WIDTH mm/in 1500 / 59.1 DEPTH mm/in 900 / 35.4 HEIGHT mm/in 1452 / 57.2 WIDTH mm/in 1732 / 68.2 DEPTH mm/in 1032 / 40.
General Data - R407C Cooling only MODEL M4AC120C M4AC150C Btu/h 115000 13700 W 33705 40152 NOMINAL TOTAL INPUT POWER W 11805 14531 NOMINAL RUNNING CURRENT A 23.6 NOMINAL COOLING CAPACITY POWER SOURCE 27.9 380-415 / 3 / 50 V/Ph/Hz R407C REFRIGERANT TYPE CONTROL TXV HEIGHT UNIT DIMENSION PACKING DIMENSION mm/in 1245 / 49.0 WIDTH mm/in 1800 / 70.9 DEPTH mm/in 1150 / 45.3 HEIGHT mm/in 1452 / 57.2 WIDTH mm/in 2032 / 80.
General Data - R407C Heat pump MODEL NOMINAL COOLING CAPACITY NOMINAL HEATING CAPACITY NOMINAL TOTAL INPUT POWER NOMINAL RUNNING CURRENT M4AC020CR M4AC025CR Btu/h 17000 22000 W 4982 6448 Btu/h 20000 25500 W 5861 7474 COOLING W 2597 3076 HEATING W 2685 2745 COOLING A 12.6 14.3 HEATING A 13.0 POWER SOURCE 14.1 220-240 / 1 / 50 V/Ph/Hz REFRIGERANT TYPE R407C CAPILLARY TUBE CONTROL UNIT DIMENSION PACKING DIMENSION HEIGHT mm/in 800 / 31.5 WIDTH mm/in 1160 / 45.
General Data - R407C Heat pump MODEL M4AC030CR M4AC040CR Btu/h 25000 40000 W 7327 11723 Btu/h 32500 45000 W 9525 13188 COOLING W 3804 4820 HEATING W 4004 4994 COOLING A 19.2 9.1 HEATING A 20.0 9.2 V/Ph/Hz 220-240 / 1 / 50 380-415 / 3 / 50 NOMINAL COOLING CAPACITY NOMINAL HEATING CAPACITY NOMINAL TOTAL INPUT POWER NOMINAL RUNNING CURRENT POWER SOURCE R407C REFRIGERANT TYPE CONTROL UNIT DIMENSION PACKING DIMENSION CAPILLARY TUBE HEIGHT mm/in 800 / 31.5 1410 / 55.
General Data - R407C Heat pump MODEL M4AC050CR M4AC060CR Btu/h 46000 51000 W 13481 14947 Btu/h 51000 60000 W 14947 17584 COOLING W 5446 6507 HEATING W 5647 6268 COOLING A 9.5 12.7 HEATING A 9.8 NOMINAL COOLING CAPACITY NOMINAL HEATING CAPACITY NOMINAL TOTAL INPUT POWER NOMINAL RUNNING CURRENT POWER SOURCE 12.6 380-415 / 3 / 50 V/Ph/Hz R407C REFRIGERANT TYPE CONTROL UNIT DIMENSION PACKING DIMENSION CAPILLARY TUBE HEIGHT mm/in 1410 / 55.5 WIDTH mm/in 1160 / 45.
General Data - R407C Heat pump MODEL M4AC080CR M4AC100CR Btu/h 74000 88000 W 21688 25791 Btu/h 90000 98000 W 26377 28722 COOLING W 9946 11028 HEATING W 9975 11134 COOLING A 16.4 18.5 HEATING A 16.8 18.5 NOMINAL COOLING CAPACITY NOMINAL HEATING CAPACITY NOMINAL TOTAL INPUT POWER NOMINAL RUNNING CURRENT POWER SOURCE 380-415 / 3 / 50 V/Ph/Hz R407C REFRIGERANT TYPE CONTROL UNIT DIMENSION PACKING DIMENSION CAPILLARY TUBE HEIGHT mm/in 1245 / 49.0 WIDTH mm/in 1500 / 59.
General Data - R407C Heat pump MODEL NOMINAL COOLING CAPACITY NOMINAL HEATING CAPACITY NOMINAL TOTAL INPUT POWER NOMINAL RUNNING CURRENT M4AC120CR M4AC150CR Btu/h 110000 130000 W 32239 38101 Btu/h 118000 144000 W 34583 42204 COOLING W 12273 15151 HEATING W 12386 15824 COOLING A 24.2 27.8 HEATING A 23.8 29.0 POWER SOURCE 380-415 / 3 / 50 V/Ph/Hz REFRIGERANT TYPE R407C CONTROL UNIT DIMENSION PACKING DIMENSION CAPILLARY TUBE HEIGHT mm/in 1245 / 49.
General Data - R410A Heat pump MODEL M5AC020CR M5AC025CR Btu/h 17000 21000 W 4980 6150 Btu/h 21500 25000 W 6300 7330 COOLING W 2550 2760 HEATING W 2590 2790 COOLING A 11.9 12.7 HEATING A 12.1 12.9 NOMINAL COOLING CAPACITY NOMINAL HEATING CAPACITY NOMINAL TOTAL INPUT POWER NOMINAL RUNNING CURRENT POWER SOURCE 220-240 / 1 / 50 V/Ph/Hz R410A REFRIGERANT TYPE CONTROL UNIT DIMENSION PACKING DIMENSION CAPILLARY TUBE HEIGHT mm/in 800 / 31.5 WIDTH mm/in 1160 / 45.
General Data - R410A Heat pump MODEL M5AC030CR M5AC040CR Btu/h 26800 37500 W 7848 10981 Btu/h 32500 40800 W 9517 11947 COOLING W 3720 4330 HEATING W 3630 4490 COOLING A 16.7 20.3 HEATING A 16.3 NOMINAL COOLING CAPACITY NOMINAL HEATING CAPACITY NOMINAL TOTAL INPUT POWER NOMINAL RUNNING CURRENT POWER SOURCE 21.0 380-415 / 3 / 50 V/Ph/Hz REFRIGERANT TYPE R410A CONTROL CAPILLARY TUBE & TXV HEIGHT mm/in 790 / 31.1 1410 / 55.5 WIDTH mm/in 1010 / 39.8 1010 / 39.
General Data - R410A Heat pump MODEL M5AC050CR M5AC055CR Btu/h 47000 50000 W 13763 14641 Btu/h 51000 55000 W 14934 16105 COOLING W 5090 5890 HEATING W 5130 5990 COOLING A 23.0 27.3 HEATING A 23.5 27.7 NOMINAL COOLING CAPACITY NOMINAL HEATING CAPACITY NOMINAL TOTAL INPUT POWER NOMINAL RUNNING CURRENT POWER SOURCE 380-415 / 3 / 50 V/Ph/Hz R410A REFRIGERANT TYPE CONTROL UNIT DIMENSION PACKING DIMENSION CAPILLARY TUBE & TXV HEIGHT mm/in 1410 / 55.
Components Data - R22 Cooling only MODEL MAC020C MAC025C TYPE PROPELLER Q'TY CONDENSER FAN 1 1 MATERIAL STEEL PLATE DRIVE DIRECT DIAMETER 457.2 / 18 mm/in TYPE CONDENSER FAN MOTOR INDUCTION Q'TY INDEX OF PROTECTION (IP) TYPE COMPRESSOR OIL TYPE OIL AMOUNT cm3 / fl.oz. 1 1 NA NA ROTARY SCROLL MINERAL OIL MINERAL OIL 1130 / 38 1240 / 42 TYPE CROSS FINNED TUBES SEAMLESS COPPER MATERIAL TUBE CONDENSER COIL PUMP CASING mm/in THICKNESS mm/in 9.52 / 3/8 0.33 / 0.
Components Data - R22 Cooling only MODEL MAC030C MAC040C PROPELLER TYPE Q'TY CONDENSER FAN 1 2 STEEL PLATE MATERIAL DIRECT DRIVE DIAMETER 457.2 / 18 mm/in TYPE CONDENSER FAN MOTOR INDUCTION Q'TY INDEX OF PROTECTION (IP) TYPE COMPRESSOR OIL TYPE OIL AMOUNT cm3 / fl.oz. 1 2 NA NA SCROLL SCROLL MINERAL OIL MINERAL OIL 1240 / 42 1950 / 66 CROSS FINNED TUBES TYPE MATERIAL TUBE CONDENSER COIL PUMP CASING mm/in 9.52 / 3/8 THICKNESS mm/in 0.35 / 0.014 THICKNESS mm/in 0.11 / 0.
Components Data - R22 Cooling only MODEL MAC050C MAC060C TYPE PROPELLER Q'TY CONDENSER FAN 2 2 STEEL PLATE MATERIAL DIRECT DRIVE DIAMETER 457.2 / 18 mm/in TYPE CONDENSER FAN MOTOR INDUCTION Q'TY INDEX OF PROTECTION (IP) TYPE COMPRESSOR OIL TYPE OIL AMOUNT cm3 / fl.oz. 2 2 NA NA SCROLL SCROLL MINERAL OIL MINERAL OIL 1770 / 60 1770 / 60 CROSS FINNED TUBES TYPE MATERIAL TUBE CONDENSER COIL PUMP CASING mm/in THICKNESS mm/in 9.52 / 3/8 0.35 / 0.
Components Data - R22 Cooling only MODEL MAC080C MAC100C PROPELLER TYPE Q'TY CONDENSER FAN 2 2 ALUMINIUM MATERIAL DIRECT DRIVE DIAMETER 609.6 / 24 mm/in TYPE CONDENSER FAN MOTOR INDUCTION Q'TY INDEX OF PROTECTION (IP) TYPE COMPRESSOR OIL TYPE OIL AMOUNT 2 2 NA NA SCROLL SCROLL MINERAL OIL MINERAL OIL 1770 / 60 COMP1 cm3 / fl.oz. 1950 / 66 COMP2 cm3 / fl.oz. 1950 / 66 SEAMLESS COPPER MATERIAL TUBE CONDENSER COIL BPHE PUMP CASING DIAMETER mm/in 9.
Components Data - R22 Cooling only MODEL MAC120C MAC150C TYPE PROPELLER Q'TY CONDENSER FAN 2 2 ALUMINIUM MATERIAL DIRECT DRIVE DIAMETER 609.6 / 24 mm/in INDUCTION TYPE CONDENSER FAN MOTOR Q'TY INDEX OF PROTECTION (IP) TYPE COMPRESSOR OIL TYPE OIL AMOUNT 2 2 NA NA SCROLL SCROLL MINERAL OIL MINERAL OIL 2510 / 85 COMP1 cm3 / fl.oz. 1770 / 60 COMP2 cm3 / fl.oz. 1770 / 60 TYPE MATERIAL TUBE CONDENSER COIL BPHE PUMP CASING SEAMLESS COPPER DIAMETER mm/in 9.
Components Data - R22 Heat pump MODEL MAC020CR MAC025CR PROPELLER TYPE Q'TY CONDENSER FAN 1 1 STEEL PLATE MATERIAL DIRECT DRIVE DIAMETER 457.2 / 18 mm/in INDUCTION TYPE CONDENSER FAN MOTOR Q'TY INDEX OF PROTECTION (IP) TYPE COMPRESSOR OIL TYPE OIL AMOUNT cm3 / fl.oz. 1 1 NA NA ROTARY SCROLL MINERAL OIL MINERAL OIL 1130 / 38 1240 / 42 CROSS FINNED TUBES TYPE SEAMLESS COPPER MATERIAL TUBE CONDENSER COIL PUMP CASING mm/in THICKNESS mm/in 9.52 / 3/8 0.33 / 0.013 0.35 / 0.
Components Data - R22 Heat pump MODEL MAC030CR MAC040CR TYPE PROPELLER Q'TY CONDENSER FAN 1 2 MATERIAL STEEL PLATE DRIVE DIRECT DIAMETER 457.2 / 18 mm/in TYPE CONDENSER FAN MOTOR INDUCTION Q'TY INDEX OF PROTECTION (IP) TYPE COMPRESSOR OIL TYPE OIL AMOUNT cm3 / fl.oz. 1 2 NA NA SCROLL SCROLL MINERAL OIL MINERAL OIL 1240 / 42 1950 / 66 TYPE CROSS FINNED TUBES SEAMLESS COPPER MATERIAL TUBE CONDENSER COIL PUMP CASING mm/in 9.52 / 3/8 THICKNESS mm/in 0.35 / 0.
Components Data - R22 Heat pump MODEL MAC050CR MAC060CR PROPELLER TYPE Q'TY CONDENSER FAN 2 2 STEEL PLATE MATERIAL DIRECT DRIVE DIAMETER 457.2 / 18 mm/in INDUCTION TYPE CONDENSER FAN MOTOR Q'TY INDEX OF PROTECTION (IP) TYPE COMPRESSOR OIL TYPE OIL AMOUNT cm3 / fl.oz. 2 2 NA NA SCROLL SCROLL MINERAL OIL MINERAL OIL 1770 / 60 1770 / 60 CROSS FINNED TUBES TYPE SEAMLESS COPPER MATERIAL TUBE CONDENSER COIL PUMP CASING mm/in THICKNESS mm/in 9.52 / 3/8 0.35 / 0.014 0.33 / 0.
Components Data - R22 Heat pump MODEL MAC080CR MAC100CR TYPE PROPELLER Q'TY CONDENSER FAN 2 2 MATERIAL ALUMINIUM DRIVE DIRECT DIAMETER 609.6 / 24 mm/in INDUCTION TYPE CONDENSER FAN MOTOR Q'TY INDEX OF PROTECTION (IP) TYPE COMPRESSOR OIL TYPE OIL AMOUNT 2 2 NA NA SCROLL SCROLL MINERAL OIL MINERAL OIL 1770 / 60 COMP1 cm3 / fl.oz. 1950 / 66 COMP2 cm3 / fl.oz. 1950 / 66 SEAMLESS COPPER MATERIAL TUBE CONDENSER COIL DIAMETER mm/in 9.52 / 3/8 THICKNESS mm/in 0.33 / 0.
Components Data - R22 Heat pump MODEL MAC120CR MAC150CR PROPELLER TYPE Q'TY CONDENSER FAN 2 2 ALUMINIUM MATERIAL DIRECT DRIVE DIAMETER 609.6 / 24 mm/in TYPE CONDENSER FAN MOTOR INDUCTION Q'TY INDEX OF PROTECTION (IP) TYPE COMPRESSOR OIL TYPE OIL AMOUNT 2 2 NA NA SCROLL SCROLL MINERAL OIL MINERAL OIL 2510 / 85 COMP1 cm3 / fl.oz. 1770 / 60 COMP2 cm3 / fl.oz. 1770 / 60 SEAMLESS COPPER MATERIAL TUBE CONDENSER COIL BPHE PUMP CASING DIAMETER mm/in 9.
Components Data - R407C Cooling only MODEL M4AC020C PROPELLER TYPE Q'TY CONDENSER FAN M4AC025C 1 1 STEEL PLATE MATERIAL DIRECT DRIVE DIAMETER 457.2 / 18 mm/in INDUCTION TYPE CONDENSER FAN MOTOR Q'TY INDEX OF PROTECTION (IP) COMPRESSOR 1 1 NA NA TYPE ROTARY SCROLL OIL TYPE POE OIL POE OIL OIL AMOUNT cm3 / fl.oz. 700 / 24 1240 / 42 CROSS FINNED TUBES TYPE SEAMLESS COPPER MATERIAL TUBE CONDENSER COIL PUMP CASING mm/in THICKNESS mm/in 9.52 / 3/8 0.33 / 0.013 0.35 / 0.
Components Data - R407C Cooling only MODEL M4AC030C PROPELLER TYPE Q'TY CONDENSER FAN M4AC040C 1 2 STEEL PLATE MATERIAL DIRECT DRIVE DIAMETER 457.2 / 18 mm/in INDUCTION TYPE CONDENSER FAN MOTOR Q'TY INDEX OF PROTECTION (IP) COMPRESSOR 1 2 NA NA TYPE SCROLL SCROLL OIL TYPE POE OIL POE OIL OIL AMOUNT cm3 / fl.oz. 1240 / 42 SEAMLESS COPPER MATERIAL TUBE CONDENSER COIL BPHE PUMP CASING DIAMETER mm/in 9.52 / 3/8 THICKNESS mm/in 0.35 / 0.014 THICKNESS mm/in 0.11 / 0.
Components Data - R407C Cooling only MODEL M4AC050C Q'TY CONDENSER FAN M4AC060C PROPELLER TYPE 2 2 MATERIAL STEEL PLATE DIRECT DRIVE DIAMETER 457.2 / 18 mm/in INDUCTION TYPE CONDENSER FAN MOTOR Q'TY INDEX OF PROTECTION (IP) COMPRESSOR 2 2 NA NA TYPE SCROLL SCROLL OIL TYPE POE OIL POE OIL OIL AMOUNT cm3 / fl.oz. 1770 / 60 SEAMLESS COPPER MATERIAL TUBE CONDENSER COIL DIAMETER mm/in THICKNESS mm/in THICKNESS BPHE PUMP CASING 9.52 / 3/8 0.35 / 0.014 FACE AREA 0.33 / 0.
Components Data - R407C Cooling only MODEL M4AC080C Q'TY CONDENSER FAN M4AC100C PROPELLER TYPE 2 2 ALUMINIUM MATERIAL DIRECT DRIVE DIAMETER 609.6 / 24 mm/in TYPE CONDENSER FAN MOTOR INDUCTION Q'TY INDEX OF PROTECTION (IP) COMPRESSOR 2 2 NA NA TYPE SCROLL SCROLL OIL TYPE POE OIL POE OIL 1770 / 60 OIL AMOUNT COMP1 cm3 / fl.oz. 1950 / 66 COMP2 cm3 / fl.oz. 1950 / 66 TYPE MATERIAL TUBE CONDENSER COIL mm/in 9.52 / 3/8 THICKNESS mm/in 0.33 / 0.
Components Data - R407C Cooling only MODEL M4AC120C PROPELLER TYPE Q'TY CONDENSER FAN M4AC150C 2 2 ALUMINIUM MATERIAL DIRECT DRIVE DIAMETER 609.6 / 24 mm/in TYPE CONDENSER FAN MOTOR INDUCTION Q'TY INDEX OF PROTECTION (IP) COMPRESSOR 2 2 NA NA TYPE SCROLL SCROLL OIL TYPE POE OIL POE OIL 2510 / 85 OIL AMOUNT COMP1 cm3 / fl.oz. 1770 / 60 COMP2 cm3 / fl.oz. 1770 / 60 SEAMLESS COPPER MATERIAL TUBE CONDENSER COIL BPHE PUMP CASING DIAMETER mm/in 9.52 / 3/8 THICKNESS mm/in 0.
Components Data - R407C Heat pump MODEL M4AC020CR TYPE PROPELLER Q'TY CONDENSER FAN M4AC025CR 1 1 STEEL PLATE MATERIAL DIRECT DRIVE DIAMETER 457.2 / 18 mm/in TYPE CONDENSER FAN MOTOR INDUCTION Q'TY INDEX OF PROTECTION (IP) COMPRESSOR 1 1 NA NA TYPE ROTARY SCROLL OIL TYPE POE OIL POE OIL OIL AMOUNT cm3 / fl.oz. 700 / 24 1240 / 42 TYPE CROSS FINNED TUBES MATERIAL TUBE CONDENSER COIL PUMP CASING mm/in THICKNESS mm/in 9.52 / 3/8 0.33 / 0.
Components Data - R407C Heat pump MODEL M4AC030CR PROPELLER TYPE Q'TY CONDENSER FAN M4AC040CR 1 2 STEEL PLATE MATERIAL DIRECT DRIVE DIAMETER 457.2 / 18 mm/in INDUCTION TYPE CONDENSER FAN MOTOR Q'TY INDEX OF PROTECTION (IP) COMPRESSOR 1 2 NA NA TYPE SCROLL SCROLL OIL TYPE POE OIL POE OIL OIL AMOUNT cm3 / fl.oz. 1240 / 42 SEAMLESS COPPER MATERIAL TUBE CONDENSER COIL BPHE PUMP CASING DIAMETER mm/in 9.52 / 3/8 THICKNESS mm/in 0.35 / 0.
Components Data - R407C Heat pump MODEL M4AC050CR TYPE PROPELLER Q'TY CONDENSER FAN M4AC060CR 2 2 STEEL PLATE MATERIAL DIRECT DRIVE DIAMETER 457.2 / 18 mm/in TYPE CONDENSER FAN MOTOR INDUCTION Q'TY INDEX OF PROTECTION (IP) COMPRESSOR 2 2 NA NA TYPE SCROLL SCROLL OIL TYPE POE OIL POE OIL OIL AMOUNT cm3 / fl.oz. 1770 / 60 MATERIAL TUBE CONDENSER COIL BPHE PUMP CASING SEAMLESS COPPER DIAMETER mm/in THICKNESS mm/in 9.52 / 3/8 0.35 / 0.
Components Data - R407C Heat pump MODEL M4AC080CR Q'TY CONDENSER FAN M4AC100CR PROPELLER TYPE 2 2 ALUMINIUM MATERIAL DIRECT DRIVE DIAMETER 609.6 / 24 mm/in TYPE CONDENSER FAN MOTOR INDUCTION Q'TY INDEX OF PROTECTION (IP) COMPRESSOR 2 2 NA NA TYPE SCROLL SCROLL OIL TYPE POE OIL POE OIL 1770 / 60 OIL AMOUNT COMP1 cm3 / fl.oz. 1950 / 66 COMP2 cm3 / fl.oz. 1950 / 66 SEAMLESS COPPER MATERIAL TUBE CONDENSER COIL BPHE PUMP CASING DIAMETER mm/in 9.52 / 3/8 THICKNESS mm/in 0.
Components Data - R407C Heat pump MODEL M4AC120CR TYPE Q'TY CONDENSER FAN M4AC150CR PROPELLER 2 2 MATERIAL ALUMINIUM DRIVE DIRECT DIAMETER 609.6 / 24 mm/in INDUCTION TYPE CONDENSER FAN MOTOR Q'TY INDEX OF PROTECTION (IP) COMPRESSOR 2 2 NA NA TYPE SCROLL SCROLL OIL TYPE POE OIL POE OIL 2510 / 85 OIL AMOUNT COMP1 cm3 / fl.oz. 1770 / 60 COMP2 cm3 / fl.oz. 1770 / 60 SEAMLESS COPPER MATERIAL TUBE CONDENSER COIL BPHE PUMP CASING DIAMETER mm/in 9.
Components Data - R410A Heat pump MODEL M5AC020CR Q'TY CONDENSER FAN M5AC025CR PROPELLER TYPE 1 1 MATERIAL STEEL PLATE DIRECT DRIVE DIAMETER 457.2 / 18 mm/in TYPE CONDENSER FAN MOTOR INDUCTION Q'TY INDEX OF PROTECTION (IP) COMPRESSOR 1 1 NA NA TYPE SCROLL SCROLL OIL TYPE POE OIL POE OIL OIL AMOUNT cm3 / fl.oz. 1130 / 38 SEAMLESS COPPER MATERIAL TUBE CONDENSER COIL BPHE PUMP CASING DIAMETER mm/in 9.52 / 3/8 THICKNESS mm/in 0.37 / 0..
Components Data - R410A Heat pump MODEL M5AC030CR TYPE Q'TY CONDENSER FAN M5AC040CR PROPELLER 1 2 MATERIAL STEEL PLATE DRIVE DIRECT DIAMETER 457.2 / 18 mm/in INDUCTION TYPE CONDENSER FAN MOTOR Q'TY INDEX OF PROTECTION (IP) COMPRESSOR 1 2 NA NA TYPE SCROLL SCROLL OIL TYPE POE OIL POE OIL OIL AMOUNT COMP1 cm3 / fl.oz. 670 / 23 670 / 23 COMP2 cm3 / fl.oz. 670 / 23 1130 / 38 CROSS FINNED TUBES TYPE SEAMLESS COPPER MATERIAL TUBE CONDENSER COIL PUMP CASING mm/in 9.
Components Data - R410A Heat pump MODEL M5AC050CR PROPELLER TYPE Q'TY CONDENSER FAN M5AC055CR 2 2 STEEL PLATE MATERIAL DIRECT DRIVE DIAMETER 457.2 / 18 mm/in TYPE CONDENSER FAN MOTOR INDUCTION Q'TY INDEX OF PROTECTION (IP) COMPRESSOR 2 2 NA NA TYPE SCROLL SCROLL OIL TYPE POE OIL POE OIL 1130 / 38 OIL AMOUNT COMP1 cm3 / fl.oz. 1130 / 38 COMP2 cm3 / fl.oz. 1130 / 38 SEAMLESS COPPER MATERIAL TUBE CONDENSER COIL BPHE PUMP CASING DIAMETER mm/in 9.
Safety Devices - R22 Cooling only & Heat pump MODEL MAC020C/CR TYPE HIGH PRESSURE SWITCH NC NC OPEN kPa / psi 2939 / 426 2939 / 426 CLOSE kPa / psi 2415 / 350 2415 / 350 TYPE LOW PRESSURE SWITCH (COOLING OPEN ONLY) CLOSE LOW PRESSURE SAFETY DEVICE SWITCH (HEAT PUMP) MAC025C/CR NC NC kPa / psi 124 / 18 125 / 18 kPa / psi 193 / 28 193 / 28 TYPE NC NC OPEN kPa / psi 48 / 7 48 / 7 CLOSE kPa / psi 152 / 22 152 / 22 DIFFERENTIAL PRESSURE SWITCH YES YES ANTI-FREEZE PROTECTION S
Safety Devices - R22 Cooling only & Heat pump MODEL MAC080C/CR TYPE HIGH PRESSURE SWITCH NC NC OPEN kPa / psi 2939 / 426 2939 / 426 CLOSE kPa / psi 2415 / 350 2415 / 350 LOW PRESSURE TYPE SWITCH (COOLING OPEN ONLY) CLOSE SAFETY DEVICE LOW PRESSURE SWITCH (HEAT PUMP) NC NC kPa / psi 124 / 18 125 / 18 kPa / psi 193 / 28 193 / 28 TYPE OPEN kPa / psi CLOSE kPa / psi NC NC 48 / 7 48 / 7 152 / 22 152 / 22 BUILT IN ON BOARD BUILT IN ON BOARD DIFFERENTIAL PRESSURE SWITCH YES YES
Safety Devices - R407C Cooling only & Heat pump MODEL M4AC020C/CR TYPE HIGH PRESSURE SWITCH NC NC OPEN kPa / psi 3243 / 470 3243 / 470 CLOSE kPa / psi 2650 / 384 2650 / 384 LOW PRESSURE TYPE SWITCH (COOLING OPEN ONLY) CLOSE LOW PRESSURE SAFETY DEVICE SWITCH (HEAT PUMP) M4AC025C/CR NC NC kPa / psi 124 / 18 124 / 18 kPa / psi 193 / 28 193 / 28 TYPE NC NC OPEN kPa / psi 48 / 7 48 / 7 CLOSE kPa / psi 152 / 22 152 / 22 DIFFERENTIAL PRESSURE SWITCH YES YES ANTI-FREEZE PROTECTIO
Safety Devices - R407C Cooling only & Heat pump MODEL M4AC080C/CR TYPE HIGH PRESSURE SWITCH NC NC OPEN kPa / psi 3243 / 470 3243 / 470 CLOSE kPa / psi 2650 / 384 2650 / 384 TYPE LOW PRESSURE SWITCH (COOLING OPEN ONLY) CLOSE SAFETY DEVICE LOW PRESSURE SWITCH (HEAT PUMP) NC NC kPa / psi 124 / 18 124 / 18 kPa / psi 193 / 28 193 / 28 TYPE NC NC OPEN kPa / psi 48 / 7 48 / 7 CLOSE kPa / psi 152 / 22 152 / 22 PHASE PROTECTION BUILT IN ON BOARD BUILT IN ON BOARD DIFFERENTIAL PR
Safety Devices - R410A Heat pump MODEL M5AC030CR HIGH PRESSURE SWITCH LOW PRESSURE SWITCH SAFETY DEVICE TYPE NC OPEN kPa / psi 4140 / 600 4140 / 600 CLOSE TYPE kPa / psi 3312 / 480 3312 / 480 OPEN CLOSE NC NC kPa / psi 124 / 18 124 / 18 kPa / psi 193 / 28 193 / 28 DIFFERENTIAL PRESSURE SWITCH YES YES ANTI-FREEZE PROTECTION SENSOR YES YES OVER PRESSURE RELIEF VALVE YES YES ANTI-FREEZE HEATER ON BPHE PUMP OLP YES YES YES YES COMPRESSOR OLP YES YES M5AC050CR M5AC055CR M
118 MAC060C MAC050C MAC040C MAC030C MAC025C MAC020C MODEL 4 5 6 7 8 9 10 4 5 6 7 8 9 10 4 5 6 7 8 9 10 4 5 6 7 8 9 10 4 5 6 7 8 9 10 4 5 6 7 8 9 10 LEAVING WATER TEMP (°C) Cooling Only Refrigerant : R22 4.62 5.00 5.38 5.76 6.13 6.51 6.89 8.52 8.67 8.83 8.98 9.14 9.29 9.45 8.85 9.02 9.18 9.35 9.52 9.68 9.85 11.73 12.19 12.65 13.10 13.56 14.02 14.48 15.57 15.86 16.16 16.45 16.74 17.04 17.33 16.18 16.48 16.77 17.07 17.37 17.66 17.96 COOL CAP. kW 20 2.18 2.19 2.21 2.22 2.24 2.25 2.27 1.90 1.90 1.
119 5.20 5.56 5.74 6.20 6.69 7.23 6.29 6.70 7.11 7.52 8.01 8.70 28.75 29.62 30.27 30.50 31.06 31.90 35.67 36.82 37.12 37.88 38.53 39.54 42.88 44.19 45.10 45.54 46.38 47.57 5 6 7 8 9 10 5 6 7 8 9 10 5 6 7 8 9 10 MAC100C MAC120C MAC150C 7.23 7.81 8.17 8.67 9.35 10.12 4.31 4.64 4.83 5.16 5.58 6.03 25.18 25.92 26.15 26.47 27.30 27.92 5 6 7 8 9 10 MAC080C COMP. INPUT kW 20 COOL CAP. kW MODEL Cooling Only Refrigerant : R22 LEAVING WATER TEMP (°C) 41.39 42.58 43.55 44.04 44.98 45.90 34.
120 MAC060CR MAC050CR MAC040CR MAC030CR MAC025CR MAC020CR MODEL 4 5 6 7 8 9 10 4 5 6 7 8 9 10 4 5 6 7 8 9 10 4 5 6 7 8 9 10 4 5 6 7 8 9 10 4 5 6 7 8 9 10 3.29 3.31 3.55 3.57 3.59 3.61 3.63 3.65 3.67 4.82 4.83 4.84 4.85 4.86 4.87 4.88 14.48 14.33 14.60 14.87 15.14 15.41 15.68 15.94 16.18 16.48 16.77 17.07 17.37 17.66 17.96 12.65 14.02 3.22 3.24 12.19 3.27 3.20 11.73 3.26 2.76 10.71 13.56 2.71 10.53 13.10 2.66 1.99 9.24 10.36 1.99 9.09 2.61 1.
121 MAC150CR MAC120CR MAC100CR MAC080CR MODEL 5.58 6.10 23.17 23.59 24.11 24.75 27.44 27.69 28.93 29.46 30.10 30.96 33.52 34.25 35.06 35.48 36.29 37.60 39.50 40.91 41.54 42.64 43.55 45.07 7 8 9 10 5 6 7 8 9 10 5 6 7 8 9 10 5 6 7 8 9 10 9.97 9.22 8.55 8.10 7.66 7.13 8.87 8.19 7.61 7.22 6.82 6.33 7.63 7.05 6.54 6.11 5.87 5.47 6.53 5.27 5.02 22.75 4.66 22.02 6 COMP. INPUT kW 5 COOL CAP.
122 MAC060CR MAC050CR MAC040CR MAC030CR MAC025CR MAC020CR MODEL 11.09 10.65 55 11.98 40 50 12.42 35 11.54 9.13 55 45 9.25 9.50 40 50 9.62 35 9.37 5.81 45 6.48 55 7.82 40 50 8.49 35 7.15 4.96 55 45 5.12 5.44 40 50 5.60 35 5.28 5.00 55 45 5.07 5.23 40 50 5.31 35 5.15 2.87 55 45 3.31 50 4.18 3.74 4.61 35 40 45 HEAT CAP. kW -7 7.63 7.02 6.42 5.81 5.20 6.22 5.59 4.95 4.32 3.69 5.35 4.83 4.33 3.82 3.32 4.19 3.79 3.40 3.00 2.
123 MAC150CR MAC120CR MAC100CR MAC080CR MODEL 17.28 40 20.91 22.79 22.19 10.43 55 21.55 50 45 23.19 21.92 40 9.93 23.77 23.01 35 8.77 20.25 21.98 21.19 8.84 55 21.08 50 45 22.17 21.27 40 8.24 23.03 22.58 35 7.28 19.87 21.36 20.83 8.11 55 20.92 50 45 21.68 40 22.07 22.60 22.17 35 7.31 15.96 6.47 16.72 17.29 17.70 18.14 55 5.09 4.78 4.22 50 16.88 17.69 35 45 -5 0 4 7 AMBIENT TEMPERATURE (°C) 10 15 21 11.09 10.87 10.69 10.16 9.
124 M4AC060C M4AC050C M4AC040C M4AC030C M4AC025C M4AC020C MODEL 4 5 6 7 8 9 10 4 5 6 7 8 9 10 4 5 6 7 8 9 10 4 5 6 7 8 9 10 4 5 6 7 8 9 10 4 5 6 7 8 9 10 5.38 5.82 6.26 6.70 7.14 7.59 8.03 8.33 8.48 8.63 8.78 8.94 9.09 9.24 8.69 8.85 9.01 9.18 9.34 9.50 9.66 11.73 12.19 12.65 13.10 13.56 14.02 14.48 15.57 15.86 16.16 16.45 16.74 17.04 17.33 15.88 16.17 16.46 16.75 17.04 17.33 17.62 COOL CAP. kW Cooling Only Refrigerant : R407C LEAVING WATER TEMP (°C) 20 2.13 2.14 2.16 2.17 2.19 2.20 2.22 2.
125 5.42 5.80 5.99 6.47 6.98 7.53 6.47 6.89 7.31 7.74 8.26 8.94 7.81 8.45 8.84 9.38 10.12 10.94 34.02 35.12 35.41 36.12 36.72 37.71 42.36 43.67 44.54 44.97 45.77 47.00 5 6 7 8 9 10 5 6 7 8 9 10 M4AC100C M4AC120C M4AC150C 4.73 5.09 5.30 5.66 6.13 6.61 COMP. INPUT kW 26.39 27.19 27.77 27.98 28.48 29.27 M4AC080C 23.77 24.46 24.68 24.98 25.74 26.34 COOL CAP. kW 20 5 6 7 8 9 10 5 6 7 8 9 10 MODEL Cooling Only Refrigerant : R407C LEAVING WATER TEMP (°C) 41.69 42.98 43.76 44.25 45.03 46.
126 M4AC060CR M4AC050CR M4AC040CR M4AC030CR M4AC025CR M4AC020CR MODEL 4 5 6 7 8 9 10 4 5 6 7 8 9 10 4 5 6 7 8 9 10 4 5 6 7 8 9 10 4 5 6 7 8 9 10 4 5 6 7 8 9 10 4.36 4.71 5.07 5.43 5.79 6.14 6.50 7.97 8.12 8.26 8.41 8.55 8.70 8.84 8.79 8.95 9.10 9.26 9.42 9.58 9.74 11.73 12.19 12.65 13.10 13.56 14.02 14.48 14.33 14.60 14.87 15.14 15.41 15.68 15.94 15.58 15.86 16.15 16.43 16.72 17.00 17.29 COOL CAP. kW 20 2.12 2.13 2.15 2.16 2.18 2.19 2.21 2.14 2.15 2.16 2.17 2.18 2.19 2.20 2.65 2.70 2.76 2.81 2.
127 25.80 26.05 27.21 27.71 28.30 29.11 33.03 33.75 34.55 34.96 35.76 37.05 38.26 39.63 40.23 41.29 42.18 43.65 5 6 7 8 9 10 5 6 7 8 9 10 5 6 7 8 9 10 M4AC100CR M4AC120CR M4AC150CR M4AC080CR 21.16 21.86 22.26 22.66 23.16 23.77 COOL CAP. kW 5 6 7 8 9 10 MODEL 20 8.27 8.89 9.40 9.93 10.71 11.56 6.53 7.04 7.45 7.86 8.47 9.14 5.63 6.06 6.30 6.75 7.28 7.86 4.91 5.30 5.56 5.89 6.44 6.88 COMP. INPUT kW Heatpump - Cooling Mode Refrigerant : R407C LEAVING WATER TEMP (°C) 37.51 38.84 39.52 40.
128 M4AC060CR M4AC050CR M4AC040CR M4AC030CR M4AC025CR M4AC020CR MODEL 35 40 45 50 55 35 40 45 50 55 35 40 45 50 55 35 40 45 50 55 35 40 45 50 55 35 40 45 50 55 7.04 7.65 10.83 5.83 12.18 11.28 5.22 12.63 6.44 7.03 8.95 11.73 6.31 4.88 9.32 5.59 4.17 9.44 9.07 5.76 9.20 5.21 6.08 5.80 8.19 6.78 3.57 8.89 4.66 4.71 5.12 7.49 4.26 5.29 3.37 5.62 3.82 2.93 5.78 5.45 3.17 5.09 2.40 5.33 2.91 2.14 5.41 5.17 2.71 2.61 2.66 2.56 3.00 5.25 2.41 2.26 3.
129 8.30 9.30 10.00 9.93 11.22 11.81 19.90 19.20 18.80 24.26 23.73 23.20 35 40 45 50 55 35 40 45 50 55 M4AC120CR M4AC150CR 6.40 7.20 7.70 17.10 16.70 16.30 M4AC100CR kW kW 7.30 8.10 9.00 INPUT CAP. 18.10 17.70 17.00 35 40 45 50 55 COMP. HEATING 35 40 45 50 55 M4AC080CR MODEL -7 Heatpump- Heating Mode Refrigerant : R407C LEAVING WATER TEMP (°C) 27.72 27.04 26.58 25.87 24.39 22.71 21.86 21.68 20.90 19.97 19.15 18.70 18.10 17.65 16.84 18.61 18.15 17.73 17.15 16.37 kW CAP.
130 M5AC055CR M5AC050CR M5AC040CR M5AC030CR M5AC025CR M5AC020CR MODEL 4 5 6 7 8 9 10 4 5 6 7 8 9 10 4 5 6 7 8 9 10 4 5 6 7 8 9 10 4 5 6 7 8 9 10 4 5 6 7 8 9 10 kW 2.02 2.04 2.05 2.07 2.08 2.10 2.11 2.09 2.12 2.16 2.19 2.23 2.26 2.30 2.04 2.06 2.08 2.11 2.13 2.15 2.17 1.63 2.07 2.45 2.94 3.22 3.61 3.94 3.15 3.17 3.19 3.21 3.22 3.24 3.26 3.92 3.93 3.94 3.95 3.96 3.97 3.98 kW 5.61 6.13 6.58 7.03 7.34 7.85 8.22 6.57 6.95 7.31 7.72 8.02 8.38 8.71 9.37 9.83 10.15 10.76 10.78 11.10 11.27 11.74 11.
131 M5AC055CR M5AC050CR M5AC040CR M5AC030CR M5AC025CR M5AC020CR MODEL 35 40 45 50 55 35 40 45 50 55 35 40 45 50 55 35 40 45 50 55 35 40 45 50 55 35 40 45 50 55 2.14 2.37 2.55 2.76 2.91 2.14 2.31 2.49 2.59 2.83 2.37 2.74 3.10 3.46 3.82 2.71 11.00 3.57 4.01 4.45 3.30 3.89 4.47 5.06 5.64 5.01 5.60 6.18 6.76 7.35 kW kW 2.30 2.24 2.17 2.30 1.78 3.85 3.63 3.62 3.10 2.84 4.69 4.50 4.31 4.12 3.93 6.75 6.11 5.47 4.83 4.19 7.83 7.71 7.59 7.47 7.34 10.12 9.68 9.23 8.78 8.33 POWER INPUT HEAT CAP.
Dimensional Data Outline and Dimension 80,0 300,0 80,0 English Model : M4AC/ MAC020 / 025 / 030C/CR, M5AC020 / 025CR 10,0 1181,6 10,0 460,0 85,0 128,5 DRAINAGE 55,2 475,0 789,5 WATER WATER OUTLET INLET 128,5 All Dimensions are in mm 15,0 1181,6 15,0 79,7 300,0 80,3 Model : M4AC/ MAC040 / 050 / 060C/CR 20,0 460,0 1160,0 878,8 1409,4 WATER WATER OUTLET INLET DRAINAGE 85,0 All Dimensions are in mm 132 128,5
Model : M4AC/ MAC080 / 100 / 120 / 150C/CR D C A L K M I J WATER WA OUTLET G WA W ATER INLET H E L F B All Dimensions are in mm Model A B C D E M4AC/MAC080 C/CR 1500 900 1245 1190 297.5 F G Base Leg Hole 307.5 1446 M4AC/MAC100 C/CR 1500 900 1245 1190 297.5 307.5 1446 M4AC/MAC120 C/CR 1800 1150 1245 1190 347.5 416 1776 M4AC/MAC150 C/CR 1800 1150 1245 1190 347.
Model : M5AC030CR 1051,6 10,0 10,0 1010,0 22,3 22,3 All Dimensions are in mm 81,4 789,5 479,0 283,3 50,0 WATER OUTLET WATER INLET 147,3 94,2 15,0 1029,0 15,0 406,5 79,4 300,0 80,6 Model : M5AC040 / 050 / 055CR 85,0 70,5 WATER OUT 50,0 724,9 882,9 982,9 WATER IN 70,0 452,0 ELECTRICAL CABLE 36,5 281,5 All Dimensions are in mm 134
Accessory Hydraulic Kit (Optional) Hydraulic kit consists of 135L capacity water storage butffer tank, over pressure release value and drainage point. Weight Material of water tank Pipe Connection Type of pipes connection Packing Dimension = 92kg = Mild steel with 3mm thickness = 1 - 1/4” = BSPF Female = 838 (W) x 788 (D) x 1378 (H) The buffer tank is installed at the water return path back to chiller.
Electrical Data Electrical Data - R22 Cooling only MODEL MAC020C INSULATION GRADE POWER SOURCE CONDENSER FAN MOTOR W 135 135 A 0.67 0.67 MOTOR OUTPUT W 145 145 POLES 6 6 INSULATION GRADE E NA 220 - 240 / 1 / 50 V/Ph/Hz 220 - 240 / 1 / 50 CAPACITOR µF 45 50 RATED INPUT POWER W 2359 2405 RATED RUNNING CURRENT A 11.20 11.10 LOCKED ROTOR AMP. A 67 82 POWER SOURCE V/Ph/Hz 175 190 A 0.77 0.83 MAC030C MAC040C V/Ph/Hz 220 - 240 / 1 / 50 W 135 270 A 0.67 1.
Electrical Data - R22 Cooling only MODEL MAC080C INSULATION GRADE POWER SOURCE CONDENSER FAN MOTOR V/Ph/Hz W 565 565 A 2.40 2.40 MOTOR OUTPUT W 120 x2 120 x2 POWER SOURCE NA 380 - 415 / 3 / 50 380 - 415 / 3 / 50 µF NA NA RATED INPUT POWER W 7052 8560 RATED RUNNING CURRENT A 14.00 14.70 LOCKED ROTOR AMP. (COMP1/COMP2) A 66 / 66 74 / 74 F F V/Ph/Hz 380 - 415 / 3 / 50 380 - 415 / 3 / 50 RATED INPUT POWER W 1050 1050 RATED RUNNING CURRENT A 1.50 1.
Electrical Data - R22 Heat pump MODEL CONDENSER FAN MOTOR COMPRESSOR WATER PUMP INSULATION GRADE POWER SOURCE RATED INPUT POWER RATED RUNNING CURRENT MOTOR OUTPUT POLES INSULATION GRADE POWER SOURCE CAPACITOR RATED INPUT POWER (COOLING) RATED INPUT POWER (HEATING) RATED RUNNING CURRENT (COOLING) RATED RUNNING CURRENT (HEATING) LOCKED ROTOR AMP.
Electrical Data - R22 Heat pump MODEL MAC080CR INSULATION GRADE POWER SOURCE CONDENSER FAN MOTOR V/Ph/Hz W 565 565 A 2.40 2.40 MOTOR OUTPUT W 120 x2 120 x2 NA 380 - 415 / 3 / 50 380 - 415 / 3 / 50 µF NA NA RATED INPUT POWER (COOLING) W 7962 9190 RATED INPUT POWER (HEATING) W 7714 8694 RATED RUNNING CURRENT (COOLING) A 14.00 16.00 RATED RUNNING CURRENT (HEATING) A 13.40 15.10 LOCKED ROTOR AMP.
Electrical Data - R407C Cooling only MODEL M4AC020C INSULATION GRADE POWER SOURCE CONDENSER FAN MOTOR W 135 135 A 0.67 0.67 MOTOR OUTPUT W 145 145 POLES 6 6 INSULATION GRADE E NA 220 - 240 / 1 / 50 V/Ph/Hz 220 - 240 / 1 / 50 CAPACITOR µF 50 50 RATED INPUT POWER W 2299 2625 RATED RUNNING CURRENT A 11.00 12.10 LOCKED ROTOR AMP. A 58 82 POWER SOURCE V/Ph/Hz 183 189 A 0.80 0.83 M4AC030C M4AC040C V/Ph/Hz W 135 270 A 0.67 1.
Electrical Data - R407C Cooling only MODEL M4AC080C INSULATION GRADE POWER SOURCE CONDENSER FAN MOTOR V/Ph/Hz W 565 565 A 2.40 2.40 MOTOR OUTPUT W 120 x2 120 x2 POWER SOURCE NA 380 - 415 / 3 / 50 380 - 415 / 3 / 50 µF NA NA RATED INPUT POWER W 7848 9156 RATED RUNNING CURRENT A 15.00 15.70 LOCKED ROTOR AMP. (COMP1/COMP2) A 66 / 66 74 / 74 F F V/Ph/Hz 380 - 415 / 3 / 50 380 - 415 / 3 / 50 RATED INPUT POWER W 1050 1050 RATED RUNNING CURRENT A 1.50 1.
Electrical Data - R407C Heat pump MODEL CONDENSER FAN MOTOR COMPRESSOR WATER PUMP INSULATION GRADE POWER SOURCE RATED INPUT POWER RATED RUNNING CURRENT MOTOR OUTPUT POLES INSULATION GRADE POWER SOURCE CAPACITOR RATED INPUT POWER (COOLING) RATED INPUT POWER (HEATING) RATED RUNNING CURRENT (COOLING) RATED RUNNING CURRENT (HEATING) LOCKED ROTOR AMP.
Electrical Data - R407C Heat pump MODEL M4AC080CR INSULATION GRADE POWER SOURCE CONDENSER FAN MOTOR W 565 565 A 2.40 2.40 MOTOR OUTPUT W 120 x2 120 x2 POLES 8 8 INSULATION GRADE E F 380 - 415 / 3 / 50 V/Ph/Hz 380 - 415 / 3 / 50 CAPACITOR µF NA NA RATED INPUT POWER (COOLING) W 8331 9413 RATED INPUT POWER (HEATING) W 8360 9519 RATED RUNNING CURRENT (COOLING) A 14.10 16.20 RATED RUNNING CURRENT (HEATING) A 14.50 16.20 LOCKED ROTOR AMP.
Electrical Data - R410A Heat pump MODEL CONDENSER FAN MOTOR COMPRESSOR WATER PUMP INSULATION GRADE POWER SOURCE RATED INPUT POWER RATED RUNNING CURRENT MOTOR OUTPUT POLES INSULATION GRADE POWER SOURCE CAPACITOR RATED INPUT POWER (COOLING) RATED INPUT POWER (HEATING) RATED RUNNING CURRENT (COOLING) RATED RUNNING CURRENT (HEATING) LOCKED ROTOR AMP.
Wiring Diagrams Model : M4AC/ MAC020C 145
Model : M4AC/ MAC025 / 030C 146
147 S T N 380-415/3pH/50Hz TB1 R W_PUMP BOILER AUX-H COM1 COM2 LIVE 12V F02 F01 LP2 LP1 HP2 HP1 CO2 CO1 FLOW PO ALM DE2 DE1 C/H ON/OFF OUT_FAN2 CN6 ALM_OUT ALM_IN A_FREEZE 4WV1 OUT_FAN1 4WV2 TB2 12V 12V 12V N1 WI WO OA CD1CD2 DF1 DF2 LP HP N1 N1 N1 1 FL H T R OFF COOL ON HEAT O/F C/H 4WV HTR 2 ENTERING WATER SENSOR LEAVING WATER SENSOR OUTDOOR AIR TEMP SENSOR COMP DISCHARGE SENSOR (1) AL AL IN OUT L N C OF 2 1A 2A L N C A B OF 1 CAP C OF 1 A B OF 2 CAP C TB3 OF I
Model : M4AC/ MAC080 / 100C (With Isolated Switch) 148
Model : M4AC / MAC 120/ 150C (With Isolated Switch) 149
Model : M4AC/ MAC080 / 100C (With Terminal Block) 150
Model : M4AC / MAC 120 / 150C (With Terminal Block) 151
Model : M4AC020CR 152
Model : M4AC / MAC 025 / 030CR 153
154 S T N 380-415/3pH/50Hz TB1 R W_PUMP BOILER AUX-H COM1 COM2 LIVE 12V F02 F01 LP2 LP1 HP2 HP1 C02 C01 FLOW PO ALM DE2 DE1 C/H ON/OFF OUT_FAN2 CN6 ALM_OUT ALM_IN A_FREEZE 4WV2 4WV1 OUT_FAN1 DEFROST SENSOR (1) LP HP 1 FL ON 2 4WV OFF HEAT COOL H T R O/F C/H 4WV HTR ENTERING WATER SENSOR LEAVING WATER SENSOR OUTDOOR AIR TEMP SENSOR COMP DISCHARGE SENSOR (1) TB2 12V 12V 12V N1 N1 N1 N1 WI WO OA CD1 CD2 DF1 DF2 AL AL IN OUT 7 7 TB3 OF IN OF OUT 2A U V WE COMP.
Model : M4AC / MAC 080 / 100CR (With Isolated Switch) 155
Model : M4AC / MAC 120 / 150CR (With Isolated Switch) 156
Model : M4AC / MAC 080 / 100CR (With Terminal Block) 157
Model : M4AC / MAC 120 / 150CR (With Terminal Block) 158
Model : M5AC020 / 025CR 159
6 1 160 COMP R 1 S COMP 1 R CAP R 5 S COMP 2 R CAP R 6 5 COMP R 2 C S 1 4 L N PUMP SWITCH 1A OF 1 C OF 1 CAP TB3 OF IN OF OUT A B FL HP LP 4WV N COM2 LIVE POWER RELAY COMP 1 COOL HEAT ON OFF 12V 12V N1 N1 N1 N1 C/H O/F 1 H T R P 4WV HTR CN6 2 OUT_FAN2 2A CNL 4B AL AL TB2 IN OUT ENTERING WATER SENSOR LEAVING WATER SENSOR OUTDOOR AIR TEMP SENSOR COMP DISCHARGE SENSOR (1) COMP DISCHARGE SENSOR (2) DEFROST SENSOR (1) PART NO : 5013 4 076380 WI WO OA CD1CD2 DF1D
161 POWER RELAY COMP 1 C S S COMP 1 R CAP R 6 5 C S 5 S COMP 2 R CAP R 6 COMP R 2 1 4 8 7 8 POWER RELAY COMP 2 7 PUMP L N OF 1 CAP OF 2 CAP C C 41 TB3 OF IN OF OUT OF 2 L NC A B A B FL HP LP 4WV N 12V 12V N1 N1 LIVE COOL HEAT ON OFF N1 N1 C/H O/F COM2 2A 1A L NC SWITCH OF 1 4B 1 H T R AL AL IN OUT TB2 P 4WV HTR CN6 2 OUT_FAN2 5B LEAVING WATER SENSOR ENTERING WATER SENSOR OUTDOOR AIR TEMP SENSOR COMP DISCHARGE SENSOR (1) COMP DISCHARGE SENSOR (2) DEF
Servicing And Maintenance Servicing Servicing or maintenance of these unit must be carried out by experienced personnel with specific training in refrigeration. Repeated check the safety devices and continuous cycling of control components must be analyzed and corrected before being reset. The simple design of the refrigeration circuit totally eliminates potential problems during normal unit operation. No maintenance work is needed on the refrigeration circuit as long as the unit is operating normally.
Troubleshooting When any malfunction is occurred, immediately switch off the power supply to the unit, and contact the local dealer, if necessary. Some simple troubleshooting tips are given below: SYMPTONS 1. Compressor does not start. PROBLEM CAUSES • No power supply. • Fuses blown or automatic circuit break down open. 2. Fan does not work. 3. Unit does work, but insufficient cooling. • • Defective contactor or coil. Unit is stopped because safety device has tripped. • Loose wires.
Exploded View and Part List Model : MAC/ M4AC020 / 025/ 030C 9 11 8 3 1 15 10 5 16 18 20 13 4 12 2 17 164 7 19 14 6
ITEM 1 2 3 4 5 6 7 DESCRIPTION TOP PANEL STRUCTURE FRONT RIGHT PANEL SUPPORT PILLAR ASSY, PANEL ORIFICE STRUCTURE REAL RIGHT PANEL RIGHT ASSY BASE PAN ASSY BASE PAN 8 PANEL PARTITION 9 ASSY, COIL M(4)AC020C ASSY, COIL M(4)AC020CR ASSY, COIL M(4)AC025 C ASSY, COIL M(4)AC025CR ASSY, COIL M(4)AC030C ASSY, COIL M(4)AC030CR 10 COIL GUIDE BACK 11 COIL GUIDE LEFT 12 ASSY.
Model : MAC/ M4AC040 / 050 / 060C 3 9 1 8 16 15 11 10 5 12 23 13 20 14 21 11 18 6 22 7 4 2 19 17 166
ITEM 1 2 3 4 5 6 7 8 9 DESCRIPTION PANEL TOP ASSY STRUTURE FRONT RIGHT TOP PANEL, SUPPORT PILLAR PANEL ORIFICE ASSY STRUTURE REAR RIGHT PANEL, RIGHT ASSY, BASE PAN PANEL PARTITION ASSY COIL M(4)AC040/050C ASSY COIL M(4)AC040/050CR ASSY, COIL M(4)AC060C ASSY, COIL M(4)AC060CR 10 COIL GUARD 11 COIL GUARD 12 ASSY.
Model : M4AC/ MAC080 / 100C/CR 7 17 38 9 10 41 37 36 35 33 32 40 26 25 18 21 16 8 2 6 24 5 19 28 30 15 29 14 3 12 13 11 4 31 1 20 27 22 168 34
ITEM DESCRIPTION ASSY, BASE PAN ASSY, INS PARTITION PANEL SUPPORT, FLUTTED WIRE ASSY, RIGHT PANEL ASSY, LEFT PANEL PANEL, SUPPORT FRONT STRUCTURE BACK L/R PANEL, COIL SUPPORT PANEL, RIGHT ORIFICE PANEL, LEFT ORIFICE SUPPORT, EXPANSION TANK DOOR HINGE ASSY, DOOR PANEL RIGHT ASSY, PANEL DOOR LEFT ASSY, COIL RIGHT MAC080/100C ASSY, COIL RIGHT M4AC080/100C ASSY, COIL RIGHT M(4)AC080/100CR 16 ASSY, COIL LEFT MAC080/100C ASSY, COIL LEFT M4AC080/100C ASSY, COIL RIGHT M(4)AC080/100CR 17 ACCUMULATOR 18 LIQUID RECE
Model : M4AC/ MAC120 / 150C/CR 23 6 20 12 38 11 33 30 35 21 31 27 28 5 2 14 26 3 24 4 4 23 5 22 5 13 18 34 4 25 10 16 17 3 7 19 170
ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 DESCRIPTION ASSY, BASE PAN ASSY, PANEL PARTITION PANEL, SIDE RIGHT PANEL, SIDE LEFT PANEL, COIL SUPPORT STRUCTURE BACK L/R PANEL,CONTROL BOX SUPPORT ASSY, CONTROL BOX MAIN PANEL, SUPPORT FRONT SUPPORT,WIRE FLUTTED PANEL, RIGHT ORIFICE PANEL, LEFT ORIFICE PANEL, FRONT M4AC120/150C/CR PANEL, FRONT MAC120/150C/CR 14 ASSY, COIL LEFT MAC120/150C ASSY, COIL LEFT M4AC120/150C ASSY, COIL LEFT M(4)AC120/150CR 15 ASSY, COIL RIGHT MAC120/150C ASSY, COIL RIGHT M4AC120/150C ASSY, COI
Model : M5AC 020 / 025CR 3 11 8 9 15 1 16 10 6 18 13 21 4 12 2 17 172 20 7 19 14 6
ITEM 1 2 3 4 5 6 7 8 9 DESCRIPTION PANEL, TOP STRUCTURE, FRONT RIGHT PANEL, SUPPORT PILLAR ASSY, PANEL ORIFICE STRUCTURE, REAR RIGHT PANEL, RIGHT ASSY, BASE PAN PANEL, PARTITION ASSY, COIL ASSY, COIL 10 COIL GUARD, BACK 11 COIL, GUARD LEFT 12 ASSY, CONTROL BOX ASSY, CONTROL BOX 13 COVER, TERMINAL BOX 14 ASSY, INS WATER STORAGE TANK 22L 15 HEAT EXCHANGER, BPHE HEAT EXCHANGER, BPHE 16 CLAMP, BPHE CLAMP, BPHE 17 COMPRESSOR COMPRESSOR 18 ASSY.
Model: M5AC030CR 14 2 9 4 5 16 21 3 13 8 19 22 25 24 12 17 11 10 23 15 1 18 6 174 20 7
ITEM DESCRIPTION 1 ASSY, BASE PAN 2 PANEL, SUPPORT PILLAR 3 PANEL, PARTITION 4 ASSY, COIL 5 HEAT EXCHANGER, BPHE 6 COMPRESSOR 7 FILTER DRIER 8 STRUCTURE, REAR RIGHT 9 PANEL, TOP 10 STRUCTURE, FRONT RIGHT 5AC030CR 11 ASSY, PANEL ORIFICE 12 PANEL, RIGHT 13 COIL GUARD, BACK 14 COIL, GUARD LEFT 15 ASSY, CONTROL BOX 16 CLAMP, BPHE 17 ASSY, FAN MOTOR 18 PUMP, WATER 19 TANK, EXPANSION 2 LITER 20 SUPPORT, TUBE 21 CLIP, FILTER 5AC030CR 22 CLAMP.
Model : M5AC040 / 050/ 055CR 10 4 8 1 15 9 17 6 11 19 16 12 32 27 30 33 14 20 13 24 29 21 28 7 18 3 5 31 2 25 23 26 176 22
ITEM 1 2 DESCRIPTION PANEL, TOP ASSY, BASE PAN ASSY, BASE PAN 3 ASSY, STRUCTURE FRONT RIGHT TOP 4 ASSY, SUPPORT PILLAR 5 ASSY, PANEL ORIFICE 6 ASSY, STRUCT. REAR RIGHT 7 PANEL, RIGHT 8 PANEL, PARTITION 9 COIL GUARD, BACK 10 COIL GUARD, LEFT 11 ASSY, CONTROL BOX ASSY, CONTROL BOX 12 COVER, TERMINAL BOX 13 ASSY, PUMP BASE 14 PUMP, WATER 15 ASSY,SOLENOID COIL 16 CLAMP, BPHE CLAMP, BPHE CLAMP, BPHE 17 HEAT EXCHANGER,BPHE HEAT EXCHANGER,BPHE HEAT EXCHANGER,BPHE 18 ASSY, FAN MOTOR 19 ASSY, S.
Products manufactured in an ISO certified facility. This document contains the most current product information as of this printing. For the most up-to-date product information, please go to www .mcquay. com. © 2009 McQuay International +1 (800) 432-1342 www .mcquay.
