Unit installation

IM 736-4 17
8. Make changes to the configuration file in the BACnet Communication Module (see the Changing
the MS/TP Data Transmission Rate section.)
9. Reboot the BACnet Communication Module to change the settings.
10. In the browser on your computer:
a. Go to Tools/Internet Options/Connections/LAN Settings.
b. Restore the settings as noted in Step 6a.
11. Restore the network settings on your computer (see following page for instructions based on your
operating system.)
Network Settings for Microsoft Windows® 95 and 98
To change the network setting in Microsoft Windows 95 and 98 computer:
1. Open the Control Panel on your computer.
2. Open the Network Applet.
3. Select the TCP/IP-Ethernet card combination on your computer.
4. Select the Properties button.
5. Select the IP Address tab.
6. Note the IP address and Subnet mask if they have values or that Obtain IP address automatically
is selected.
7. Select Specify an IP address.
8. Change the Subnet mask to 255.255.0.0.
9. Change the IP address to 172.16.X.X (where X.X is unique on the subnet but not 172.16.5.8).
10. Click the OK button.
11. Reboot your computer to change the Subnet Mask and IP address.
To restore the network setting in Microsoft Windows 95 and 98 computer:
1. Open the Control Panel on your computer.
2. Open the Network Applet.
3. Select the TCP/IP-Ethernet card combination on your computer.
4. Select the Properties button.
5. Select the IP Address tab.
6. Restore the settings noted as previously noted.
7. Click the OK button.
8. Reboot your computer to restore the original Subnet Mask and IP address.
Network Setting for Microsoft Windows NT
To change the network settings in a Microsoft Windows NT computer:
1. Open the Control Panel on your computer.
2. Open the Network Applet.
3. Select the Protocols tab.
4. Select the TCP/IP-Ethernet card combination on your computer.
5. Select the Properties button.
6. Select the appropriate adapter.
7. Note the IP address and Subnet mask if they have values or that Obtain IP address automatically
is selected.
8. Select Specify an IP address.
9. Change the Subnet mask to 255.255.0.0.
10. Change the IP address to 172.16.X.X (where X.X is unique on the subnet but not 172.16.5.8).
11. Click on the Apply button.