Operating instructions
42 IMM AGSB-60
OL OL will alternately blink with the normal display on the LED display
when motor thermal overload content has reached 90% to 99% of its
capacity.
OLL The motor thermal overload content has reached 100%, and the motor
has stopped. The motor cannot be restarted until the overloaded motor
has cooled and OLt is displayed.
OLt The motor thermal overload content has been reduced to 60% or less,
and the motor can be restarted.
ena Passcode protection is enabled.
dis Passcode is disabled.
oxx xx = overload thermal content in percentage. Press the Down button
to toggle to this display.
cxx xx = pending fault.
no Attempted to change a passcode protected parameter without proper
security.
… Three decimal places blink when remote display is active.
Fxx xx Fault Code
Fault Codes
Fault codes will be displayed on the red, three-character LED display. Fault codes indicate a
problem with the starter or motor application.