Unit installation

114 ACZ / AGZ-BM IOMM ACZ/AGZ-3
Figure 35, Menu Matrix
"MENU"
"VIEW" MENUS
VIEW UNIT
STATUS (1)
VIEW UNIT
TEMP (1)
VIEW CIR #1
STATUS (1)
VIEW CIR #2
STATUS (1)
VIEW REFRIG CIR
#1 STATUS (1)
VIEW REFRIG CIR
#2 STATUS (1)
VIEW FAN S
(1)
     
VIEW UNIT
STATUS (6)
VIEW CIR #1
STATUS (4)
VIEW CIR #2
STATUS (4)
VIEW REFRIG CIR
#1 STATUS (2)
VIEW REFRIG CIR
#2 STATUS (2)
VIEW FAN S
(3)
(Right side of matrix continued from above)
"ALARM" MENUS "SET" MENUS
ALARM LOG
(LAST)
TYPE, TIME
ACTIVE ALARM
(1)
TYPE, TIME
SET UNIT
SPs, (1)
SET COMP
SPs (1)
SET ALARM
LIMITS (1)
SET FANS
SP(1)
TEST
UNIT (1)
ALARM LOG
(NEXT TO LAST)
ACTIVE ALARM
(2)
TYPE, TIME

SET COMP
SPs (2)
  
ALARM LOG
LAST 25 SHOWN 
ACTIVE ALARM
(n)
CLEAR/VIEW
SET UNIT
SPs, (10)
SET ALARM
LIMITS (4)
SET FANS
SP (6)
TEST
UNIT (6)
Menu Structure (Hierarchical)
As discussed previously, a hierarchical menu structure can be used to access the various screens.
One to twenty-five levels can be used below the top-level menu, with two or three being typical.
Optionally, the last menu selection can access one of a set of screens that can be navigated with the
UP/DOWN ARROW keys (see the scrolled menu structure below).
Menu selection is initiated by pressing the MENU key that changes the display from a regular data
screen to a menu screen. Menu selections are then made using the arrow keys according to labels on
the right side of the display (the arrows are ignored). When the last menu item is selected, the
display changes to the selected data screen. An example follows showing the selection of the
“VIEW COMPRESSOR screen.
Suppose the initial screen is as below or any other menu screen:
ALARM LOG
(data)
(data)
(data)
After pressing the MENU key, the top level menu screen will show:
< ALARM
< VIEW
< SET
⇐
⇐⇐
⇐ Continued ⇐
⇐⇐
⇐
RIGHT ARROW KEY
