Owner's manual

Assembly Instruction:
Estimated Assembly Time:20 Minutes
DO NOT over tighten the hardware.
Step 1) Place parts on a smooth even
surface,Fix 4 pieces Top Frame (A) by
using Bolt (H) into Square frame
(View Fig.1).
Step 2) Attach Frame Support Parts
(C) to Legs (B) by using Bolts (H).
Tighten all hardware accordingly with
an Allen Wrench (J) (provided) and
adjustable wrench until all pieces fit
together securely.Turn the assembled
fire pit frame over so that it sits
securely (legs down) on a flat surface
(View Fig.2).
Step 3) Attach Legs (B) to Top Frame
(A) with Bolts (H) Hand tighten (View
Fig.3)!
Step 4) Place Fire Bowl (E) in the
center of Top Frame (A) and put Log
Grate (D) in the Fire Bow (E).Mount
Lid Ring (G) on the Mesh Lid (F),Then
place the assembled Mesh Lid over
the Fire Bowl (E) (View Fig.4).
WARNING!

The use of alcohol, prescription or non-prescription drugs may impair the
ability to properly assemble or safely operate this fire pit.
 When using this fire pit, exercise the same precautions you would with
any open fire.
 Do not use this fire pit for indoor heating. Toxic carbon monoxide fumes
can accumulate and cause asphyxiation or death.
Made in China