Installation manual

Page 46
Radio Test
This control performs a self-test on the radio. The screen displays the result of the
test. The results, and actions to be taken, are discussed in ‘Appendix C: Error
Messages / Troubleshooting’.
To perform Radio Self Test:
1. In standby screen, press Menu, then scroll
to Profiles and press Select.
2. Scroll to Radio test and press Select.
3. There is only one test option in this radio
version. With Self test highlighted, press
Select.
4. Observe the progress of the test
(display shows Self test running) and watch
the indicator LEDs flash, progress bar (on
display) advance and hear the beeps which
track progress.
5. When the test is complete you should see
the message No errors found. If the display
shows anything else please refer to ‘Appendix
C: Error Messages / Troubleshooting’ for an
explanation.
Profiles
Radio test 
Select Back
Radio test
Self test 
Select Back
Radio test
No errors found
Back
Self test running


Back