Installation manual

Page 45
Set Time offset
Local = UTC + offset
+00:00
Done Back
Time/Date and Offset
This control allows the time and date to be set (from the numeric keys).
Time may be displayed as UTC or as local; local time is set as an offset (number of
hours difference) from UTC. When setting the offset, the first position is the
positive/negative setting; pressing any numeric and * # key toggles + or -.
To set Time and Date:
1. In standby screen, press Menu, then scroll to Profiles and press Select.
2. Scroll to Time/Date and Offset and press
Select.
3. The first option is Set Time/Date. Press
Select.
4. Use the scroll keys to move the cursor
position in the hh:mm field. Use the numeric
keys to change the time.
5. To complete the change and move to
the date entry screen, press Done.
6. Use the scroll keys to move the cursor
position in the DD:MM:YYYY field. Use the
numeric keys to change the date.
To set Time Offset:
1. In standby screen, press Menu, then scroll
to Profiles and press Select.
2. Scroll to Time/Date and Offset and
press Select.
3. Scroll to Set Time offset.
Press Select.
4. Use the scroll keys to move the cursor
position in the +00:00 field. Use the numeric
keys to change the time offset, and ’
*’ key to
set ‘+’ or ‘–‘ then press Done.
Profiles
Time/Date and Offset
Select Back
Time/Date and Offset
Set Time/Date 
Select Back
Set Time:UTC
hh:mm
11:27
Done Back
Set Date:UTC
DD/MM/YYYY
21/03/2002
Save Back
Time/Date and Offset
Set Time offset 
Select Back
Profiles
Time/Date and Offset
Select Back