Installation manual

Page 42

Speaker Settings

This control allows any combination of internal and external speakers to be active.

The four possibilities are selected by the scroll keys.

To set Speaker Options:

1. In standby screen, press Menu, then scroll

to Profiles and press Select.

2. Scroll to Speaker settings and press

Select.

3. Scroll through the Int/ext: (internal / external

speaker) selections. When the desired option

appears press Select.

NOTE: Alarm tones cannot be muted.

See also Speaker Mute Function under Basic Telephony Operations.

Notify Beep Volume (Alarm Volume)

This control sets the volume of the alarm used to attract the attention of the

operator. The scroll keys change the volume level.

To set Notify Beep Volume:

1. In standby screen, press Menu, then scroll

to Profiles and press Select.

2. Scroll to Notify beep and press Select.

3. Scroll through volume levels 10-30. The

Notify beep is heard for each scroll action – at

a higher or lower volume for the appropriate

scroll direction. When the desired volume is

reached press Select.

NOTE: Alarm tones cannot be muted.

Profiles

Speaker settings 

Select Back

Speaker settings

Int/ext: on/off 

Select Back

Profiles

Notify beep 

Select Back

Notify beep

Select Back