Installation manual

Page 41
Key Beep
The key beep volume may be set as high, low or off. This option is changed using
the scroll keys.
To set Key Beep mode:
1. In standby screen, press Menu, then scroll
to Profiles and press Select.
2. Scroll to Key beep and press Select.
3. Scroll through the selections Off / Low /
High. When the desired option appears press
Select.
Channel Mode
This sets the frequency channels to International or US mode of operation. US
mode is used only when the vessel is in US waters. Again, selection is by the scroll
keys. Additionally, Priority Channel can be changed in this menu.
To set Channel Mode:
1. In standby screen, press Menu, then scroll
to Profiles and press Select.
2. Scroll to Channel mode and press Select.
3. Scroll between the options International
and US. When the desired option is displayed
press Select.
4. International mode is selected in this
example. Scanning priority channel may now
be set. Use either the scroll keys or numeric
keys to enter a new Priority Channel if desired.
Profiles 
Select Exit
Profiles
Key beep 
Select Back
Key beep
Off 
Select Back
Profiles 
Select Exit
Channel mode
International 
Select Back
Profiles
Channel mode 
Select Back
Scanning priority
Channel:
16
Select Back