Technical Specifications

ManualsBrandsMCM ManualsCeramic Tile12 x 24 Antique White Interior Wallstone (14.16 sq.ft/ctn)

TEST REPORT

. :

GZIN150901320CCM

Date :

Nov

. 09, 2015

Page:

of 10

CLIENT NAME:

PHOMI MCM CO., LTD.

ADDRESS: 112 ZHONGSHENG ROAD, PANYU DISTRICT, GUANGZHOU, CHINA

The following sample(s) was/ were submitted and identified on behalf of the client as:

Sample Name :

MCM FLEX-CLAY, Unfired Flexi Clay Cladding & Flooring

Test Performed :

Selected test(s) as requested by applicant

Date of Receipt :

Sep. 09, 2015

Test Period :

Sep. 09, 2015 to Oct. 30, 2015

Test result(s) :

Please refer to the following page(s)

********To be continued********

Signed for and on behalf of

SGS-CSTC Standards Technical Services Co.,Ltd

Guangzhou Branch

____________________

Chandler Wu

Technical Engineer

Summary of content (10 pages)

PAGE 1
TEST REPORT No. : GZIN150901320CCM Date : Nov. 09, 2015 Page: 1 of 10 CLIENT NAME: PHOMI MCM CO., LTD. ADDRESS: 112 ZHONGSHENG ROAD, PANYU DISTRICT, GUANGZHOU, CHINA The following sample(s) was/ were submitted and identified on behalf of the client as: Sample Name : MCM FLEX-CLAY, Unfired Flexi Clay Cladding & Flooring Test Performed : Selected test(s) as requested by applicant Date of Receipt : Sep. 09, 2015 Test Period : Sep. 09, 2015 to Oct.
PAGE 2
TEST REPORT No. : GZIN150901320CCM Date : Nov. 09, 2015 Page: 2 of 10 Summary of test results NO. 1 2 Test items Freeze-Thaw Cycling Water absorption Test methods Test results With reference to ASTM Weight loss: 0.42% C1026-13 and Client’s Appearance: No visible requirement change 12.4% ASTM C97/C97M-15 Bulk specific gravity 1.83 Total rating: 76 3 Stain resistance test ANSI Z124.6-2007 The maximum stain depth: Clause 5.2 0.101mm (See table 1 and note 1) ANSI Z124.
PAGE 3
TEST REPORT No. : GZIN150901320CCM Date : Nov. 09, 2015 Page: 3 of 10 Test Information: Sample description: See photo Test item 1: Freeze-Thaw Cycling Test method: With reference to ASTM C1026-13 and Client’s requirement Test condition: Specimen: 76×76×3.
PAGE 4
TEST REPORT No. : GZIN150901320CCM Date : Nov. 09, 2015 Page: 4 of 10 Test item 3: Stain resistance test Test method: ANSI Z124.6-2007 Clause 5.2 Test condition: Specimen: 100×100×3.28mm Reagents: (see table 1) Test time: 16h Test result: Table 1: Test result of stain resistance test Reagent Rating Covered Uncovered Black crayon 5(stain depth:0.076mm) 5(stain depth:0.081mm) Black liquid shoe polish 5(stain depth:0.091mm) 5(stain depth:0.085mm) Blue washable Ink 5(stain depth:0.
PAGE 5
TEST REPORT No. : GZIN150901320CCM Date : Nov. 09, 2015 Page: 5 of 10 Note: 1.Cleaning procedures: 1.1 The specimen shall be washed with tap water and cheesecloth or soft bristle brush using 20 scrub cycles with normal hang pressure and dried by blotting. A stain shall be defined as a change in surface texture or a change in color. Specimens not staining at this point shall have a rating or 1-non-sraining. 1.
PAGE 6
TEST REPORT No. : GZIN150901320CCM Date : Nov.
PAGE 7
TEST REPORT No. : GZIN150901320CCM Date : Nov. 09, 2015 Page: 7 of 10 Test item 5: Static coefficient of friction ε1 Test method: ASTM C1028-07 Test condition: Specimen: 200×200×3.28mm Contact area: 75×75mm 2 Load: 23.8kg Test result: Dry condition: 1.11 Wet condition: 0.
PAGE 8
TEST REPORT No. : GZIN150901320CCM Date : Nov. 09, 2015 Page: 8 of 10 Test item 7: Light Ageing Test-UV Exposure Test method: ASTM G154-12a Cycle1 & ASTM D2244-15a & ASTM D2616-12 Test condition: Exposure cycle: ASTM G154-12a cycle 1 Lamp type: UVA-340 2 8h UV at (60±3)℃ BPT, 0.89W/(m •nm)@340nm 4h condensation at (50±3)℃ BPT Exposure duration: 1000h Test result: Sample Gray scale(See note 1) △ E*ab (See note 2) 1 4.0 0.9 Note: 1.
PAGE 9
TEST REPORT No. : GZIN150901320CCM Date : Nov.
PAGE 10
TEST REPORT No. : GZIN150901320CCM Date : Nov.