User manual
6
2. DEVICE OPERATION
In device operation, the enter key on remote control has the same function as left click of the mouse.
2.1. REMOTE KEY INSTRUCTION
2.1.1. REMOTE CONTROL
The remote control is the secondary input device
For navigating the system’s interface.
To use the remote control:
1. STANDBY: Press to turn on/off standby mode.
2. LOGIN/LOCK: Remote control can control the device through the
device number is landing, Locked shielded remote control equipment
3. Number/Channel buttons: While in menus,
press buttons 0~9 to enter values; during live
viewing, press to view channels in full-screen.
4. : Press to switch between quad and
split-screen displays.
5. MENU: Opens the main menu.
6. PTZ: Press to open the PTZ control window.
7. EXIT: Close menu windows.
8. Navigation/OK:
• : Move cursor in menus up,Channel Up
• : Move cursor in menus right,Channel Up, during
playback, increase forward playback speed (2X, 4X,
8X,16X,32X).
• : Move cursor in menus left, Channel down, during playback,
increase reverse playback speed (2X, 4X, 8X,16X,32X)
• : Move cursor in menus down, Channel down
• OK: In menus, press to confirm selections;
9. +/ - : In menus, press to adjust values.
10. RECORD: Press to start manual recording.
11. STOP: Press to stop manual recording.
12. EXTRA: For the future use.
13. Playback controls:
• : Increase reverse playback speed 2X, 4X, 8X,16X,32X;
• : Press to start playback;
• : Press to increase forward playback speed 2X,4X, 8X,16X,32X;
• : Press to slow playback speed by 1/2, 1/4, 1/8, 1/16,1/32;
• : Press to freeze playback to one frame, then press again to advance frame-by-frame
14.AUDIO/MUTE: Turn on/off audio
2.1.2. Use Remote controller to select the device number:
Press 【LOGIN/LOCK】 key, and enter device number, then you can control the device by this
remote control. (Device number is available in 【PASSWORD】)
For example. Select the device with number "000001".
Press 【LOGIN/LOCK】+【1】,then the remote controller can control this device.
Remark:
1. Remote controller can control the device with number"000000" as default.
TIP
: When using the remote control to
enter password and camera titles,
select the field using the navigation
buttons press ENTER, and then press
the number buttons.