User manual

30
Figure3-5
5. See PC's IP address, subnet mask, default gateway. (Figure 8-5 in the parameters
depending on the specific circumstances of different users)
6. DVR set up the corresponding IP address, subnet mask, and default gateway (see
section 6.5 Network Settings). DVR which the subnet mask, default gateway and the PC the
same as, IP address must be in the same network segment, but you can not have been
used with the same IP address, or IP addresses will result in conflict. The above map for
example, IP address should be: 192.168.0.X, in which X is not 40 or 1 (including the other is
using the IP address), and can not be more than 255, the subnet mask is 255.255.255.0,
gateway to 192.168.0.1.
3.2. FEATURE
Through the IE browser of OS and install the software, you are able to do the network operation
remotely, which is much more convenient. DVR support C/S, B/S, and visit in LAN and WAN, also
support IP and domain name visiting.
Remark: Operating system Windows XP, Windows Vista and Browser IE6.0, IE7.0 is recommended
3.3. USER LOGIN
Input the DVR local IP in IE browser, when changed the port, you should add the port number after
IP address, e.g. if DVR local IP is 192.168.1.118 (LAN) and the port is 8088, you should input 1http://
192.168.1.118:8088. The default port is 8088, and directly input http:// 192.168.1.118 to access the login
interface as following.
Select English interface in the top left side. Input username and password to enter into the
system. The username and passport is same as the ones set in DVR，Sign in IE must enter a
user name and password to log in, the user name and password consistent with the DVR，the
default administrator user: admin, the corresponding password is: 123456，
PASSWORD: Administrator has all authorities, operator has limited authorities who they can
only watch, playback, please change the unit No. and default password is blank.
NETWORK: LAN/INTERNET(WAN)