User manual

24
DATE: Setup system date via numeric key.
DATE FORMAT: Press ENTER to switch between the date patterns, there are YY-MM-DD and
MM/DD/YY two options.
TIME: Setup system time via numeric key.
TIME FORMAT: Press ENTER to switch between the date patterns, there are 12 HOURS and 24
HOURS two options.
Remark: You must press 【APPLY】 to save it, otherwise it won’t save the modify if you exit this
interface.
DST: DST settings, you can setup DST as you want here.
2.2.4.2 PASSWORD
Move the cursor to【PASSWORD】（Icon with the orange box means that selected）, press【Enter】to enter
into the setting interface.
Device ID：Press figures to set Device ID directly. After finished, if you want to control DVR by
remote controller, you need to press [Login/Lock]+ Device ID first, then you can control it by remote
controller.（Please check Chapter Three for the introduction of remote controller.）
User ID：Press [OK] to select user ID, it supports 5 User IDs.
User Name：You can change user name here. (Note: admin can not be changed)
Password：Enter figures to set your passwords. (Note: max 6 figures; System Administrator [admin]